When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.
View 8 RepliesI am using Lightroom 4.4 Dell Ultrasharp monitor is calibrated. I own and have been referring to Scott Kelby's Lightroom4 book for digital photographers. I recently took some photos of my daughters prom. She had on a beautiful reddish orange dress. I notice that the dress appears very red in the develop module, however, appears a bit more orange in the library module. The change is very noticeable between the modules. The dress also appears similar to the library module view (a bit more orange) when viewed on the web via Flickr utilizing Chrome, Firefox, or IPad. It also appears the same when exported to a JPEG file.
I have done some experimenting and have determined that this color change effect appears to be very noticeable utilizing the Adobe Standard Camera Calibration Profile. It does not happen (at least to a noticeable extent) with the others such as Camera Standard where the dress appears a bit more orange in both the library and develop module. I do, however, like the appearance of the Adobe Standard profile better and this happens to be the default profile as well.
I have also noticed that the dress looks more orange when Soft Proofing is enabled. The change happens immediately when the check box is enabled. Checking the box makes the photo appear similar to the Library module view. Enabling Soft Proofing does make noticeable that there is Destination Gamut Warning which mainly involves the dress which is the point of interest, however, there is no warning with the Monitor Gamut Warning. I am intending to place the photos on the web at this time via Flickr. I will be printing several later so will be worrying about the printer gamut at that time. But for now, I would like to get the photos on the web looking as intended.
For some reason images in the library module aren’t as sharp compared to the develop module. If I’m in develop images are nice and sharp but as soon as I select the library you can see the image quality drop and image becomes less blurry!
View 4 Replies View RelatedSharpening applied in develop module is not shown when switching back to library module. It looks the problem occurs when having size to "FIT". With 1:1 there seams to be no issue. Export also looks fine in 1:1.
I use Mac 10.9.1, LR5.3, Nikon NEF 24Mbit from D600.
I hope this is a way to get support from Adobe.
After making changes to an image (sharpening, exposure, contrast, etc, etc) in the develop module, when I head over to the library module, the image does not show the latest changes. What's worse is when I export a JPG of the image, it exports the original! What's the point in having LR?
View 1 Replies View RelatedWhen I move photos from the develop module to the web module they get a garish/reddish look . I want the photos in slide shows to look like they do in the Develop module. How do I do that?
View 1 Replies View RelatedI'm running LR3.6 on XP SP2 with a wide gamut NEC PA241W monitor (calibrated). I haven't noticed a problem before, but just noticed a colour shift on shots of autumn golds and yellows. I get the image how I want it, working from the raw file in the Develop module, then switch to the Loupe view in the Library, where it looks less saturated. This is still viewing the raw file, not an exported file, so it should still all be working in the internal ProPhoto colour space?
View 1 Replies View RelatedI was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
Why this wasn't changed?
I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
Using Lightroom 4.1 final, I see greatly different color saturation between the Library (very saturated) and the Develop (seems OK) module if I start the program on my sRGB monitor and drag the window to the wide gamut screen.
It seems like the Library preview is rendered as if the monitor was sRGB.
This seems very similar to the problem that was fixed from 4.1 RC2 to 4.1 final, but more specific to particular circumstances. And the problem does not exist if LR starts on the wide gamut monitor.
I'm using LR 4.1 final 64 bit on Windows 7 64 bit and I always use LR with a single window despite having two monitors.
The image does not come up when i switch from the library to develop module.
View 1 Replies View RelatedThe curved, block like, lines in the upper left of this photo appears in the Library module and after I export. When I am in the Develop module, the lines are not there. What is causing these lines, and how can I make it stop.
View 3 Replies View RelatedI've been using my LR3 for a few months but this is the first time that I got an error message when I was switching from the Library module to the the Develop module. I have a macbook pro with 500 GB HD. I am currently using 450 GB already.
View 1 Replies View RelatedI've been having problems with LR 5.2 when I do sharpening (and sometimes spot removal) in the develop module. It looks fine in the develop pane, but when I move to library module the sharpening and spot removal disappear (and reappear when I switch back to develop). The exported images are the same as the view in Library mode. How do I get the exported images to have the sharpening and spot removal that I've done in develop?
View 9 Replies View RelatedIs there a way to add text (names or locations)so it shows on a photo from the library or develop module? I know you can add text in the slidshow module or when exporting, but it would be faster in the library/develop module.
View 2 Replies View RelatedI have gone through the process of hitting alt/option when in develop to reset default settings in develop to no avail as the images keep being altered whether you are simply viewing in All photos in library module or a single image in develop .
View 14 Replies View RelatedI get red and blue splotches on photos in LR5 Develop Module. Seems to be mainly in bright areas of photos. Not there in Library module. I noticed this in the Beta as well but thought it would be fixed before release. In LR4.4 everything is fine.
View 2 Replies View RelatedI have important some photos into the library catalog, but they are not showing up in the filmstrip or develop module, even when I click to select one. I can work on it in the library section, but not the develop section. What do I have to do to make it appear in 'develop'?
View 2 Replies View Relatedwhen I take my photos into the 'Develop' area, they become covered with red dots like bacteria.
View 4 Replies View Related I managed to get my catalog transferred from Elements 8 and it is now working well. Feeling confident in the Library module I went to move on to the Develop module and now I have another problem, the photos are not showing up to edit. They are visible in the film strip and the top left corner, but not the actual screen. All the metadata is also available.
Possibly a related problem (which may also need a resolution) is:While all the data is there in Library module it is showing metadata conflict for many photos.
BTW some additional information which may be relevant.
-I have already upgraded to 4.1.
-I have the photos on a network drive.
-Photos are Raw DNG format
When I open the photos in "Library" do not look good. In "Develop" yes... When I go Library to Develop, the screen moves a bit, and then it looks good but does not work because when I export, the photos look, like in Library. I'm climbing the walls from last night (I uninstalled, updated, etc) Now is Lightroom 5.
View 6 Replies View RelatedTrying to move some photos to a different folder in the Library Module. I highlite the photos, click on the folder I want to move them to and press "Move Selected Photos to this Folder." Then I get an error message that the photos are already in the destination. OK. 1 Problem I just made the folder. My computer crashed about 3 weeks ago. Got it back up and reinstalled LR3.
Made 2 catalogs;
1. Personal and
2. Work Photos.
All of my personal photos I put in the personal cat with no sub-folders, my work went into the work which I made sub-folders. Today I finally got the time to set up my Personal folder. Made 3 new folders, one was Vietnam, which I divided into sub-folders of the place I was stationed and my R&R to Hawaii. Started separating the photos, all went well till I tried to move photos to a sub-folder call Phu Loi. Then I got the error message.
I have been using LR4.4 and now upgraded to 5. My only problem has been neither versions display the photos in filmstrip or the Library module after being imported. It displays blank frames and you can click on one in Develop and it will show the photo. But its obviously very hard to identify a specific photo if you can't see it in Library or Filmstrip.
I have read various manuals and don't see the answer as it is assumed LR does this. Nikon View NX2 on the same computer works fine.
I also wonder could there be a conflict between the Nikon View NX2 program and Lightroom.
I can see a previously processed image in the Library module. When I try to open that image in Develop, it changes to another image in the same folder. This only happens with certain images.
View 7 Replies View RelatedThe main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies View RelatedI can't process any images as the basic tab has suddenly vanished.how can I get it back?
View 3 Replies View RelatedThis may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders
I am running LR4 ver4.3. All of a sudden I receied an error message stating cannnot switch to module. I have tried all the usual stuff before going out to the web to look for fixes. On adobe's site they recommended 6 things which I did exactly as instructed and still nothing..I am running iMac mountain lion and everything on my computer is up to date.
View 1 Replies View RelatedWhen I open Lightroom the develope module does not appear with the other modules in the upper right hand corner. How do I corret this?
View 2 Replies View RelatedI am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
View 1 Replies View RelatedI can't access the "Hue" tab in develop module. I can only access Hue by selecting "All."
View 2 Replies View Related