Lightroom :: 5 Exports Images That Are Not Selected?
Jun 28, 2013
I can't reproduce this consistently; but I've had this happen many times now.
Product - Lightroom 5 on OS/X 10.8.4.
I select two images in the develop module filmstrip to pick the best one for export, the images are usually stacked in the Library.I use the side by side compare tool (C) to compare the images.I may go back to the develop module to adjust setting on one or both images.
At some point I will unselect the image I don't want to export in the filmstrip, then press Command + Shift + E to export.
LR will sometimes export both images even though only one is selected in the filmstrip.
If I go back to the Library before exporting then LR will only export the selected image.
View 10 Replies
ADVERTISEMENT
May 11, 2012
My rig includes Windows 7, Asus P8Z68 Deluxe Gen 3 with i7 2600K, 16GB DDR3 mem, SSD drives, fast Radeon video card.
I'm using Lightroom 4, just upgraded, have this problem: when I export to Folder1> Subfolder 1, it puts the export images in the next up hierarchical folder, i.e. Folder1. I select the folder I want in the Export dialog, and I don't have any subfolders selected or created, but it always sticks the shots in the next folder up the tree, it's happened every time I've exported.
View 3 Replies
View Related
Jul 11, 2012
For example, I often export a folder of full-res images, and then go back and do the same images as lo-res with watermarks, that I export to an "email" folder inside the hi-res folder. That way, I email the little ones for clients to peruse, and then send the full-res after they agree to buy. I know I can set up two presets and do them separately, but thought I'd ask.
View 7 Replies
View Related
Jul 2, 2012
how it deals with cropped images. I have the following edited image, cropped to some specific region:
Then, I tell lightroom to edit this image in Photoshop CS4:
However, once it hits photoshop, it has magically gained more image data than I told Lightroom there should be:
Somehow, all the development settings are correct, but the crop has too much data.
View 5 Replies
View Related
Jun 17, 2012
I've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies
View Related
Jul 18, 2012
In Lightroom 4.1 when rating (flags, stars or colors) a selected group of images all images selected will have the same flag applied. For instance if I select 10 images to view in the survey mode to compare and select 1 to be flagged as rejected all 10 will be flagged rejected, not just the one. Is there a way to turn this off to select a group of images and flag each differently?
View 2 Replies
View Related
May 11, 2012
I just imported approximately 1500 raw images shot with my Nikon D800. Approximately 75 of the files would not import and I got LR4 unable to import message for those files.
All images were NEFs and most seem to be in clusters among the 1500 files. The images all show up in CS5 Bridge and Camera Raw 6.7 and open just fine in Photoshop CS5. They will show up in LR4 if I convert them to DNGs.
I just figured out that this is happening only with images that were shot at a 16:9 ratio, all other images were shot at the default 2:3 ratio. I would still like to understand why images shot at 16:9 won't show up in LR4.
View 2 Replies
View Related
Oct 31, 2013
Since "upgrading" to lightroom 5.2 I've been plauged by it applying whatever I do to the image I'm on as well as the next image. The second image is not chosen - I only have one image selected. Whether I'm trying to do a correction, a crop, give it a number of stars, edit in Photoshop - it always affects two images at once.
View 3 Replies
View Related
Sep 15, 2012
I selected just 1/2 images of a folder, yet LR imports them all anyway.
View 2 Replies
View Related
Dec 12, 2011
I am having 2 problems.
When I am in lightroom's library (3.5), I would like to change the time of capture for multiple photos, and apply keywords.
However, when I perform either of those actions, the changes are only applied to the image shown in the "more brightly highlighted" image, not all that are selected.
Is there a setting I am missing? I just cannot seem to figure out why this is not working.
Also, I aplogize if my searching skills are weak and this has been covered already. I did attempt to see if this question has been answered before posting.
View 3 Replies
View Related
Mar 19, 2013
Importing images from specific folders is including images from outside selected folders.
View 3 Replies
View Related
Feb 19, 2014
when I export my EPUB, InDesign inserts wrong images into the HTML.
I have a multi-artboard Illustrator file that is placed in the document. Every chapter has an image in front of it, every image is an artboard in the .ai.
When I export to EPUB, some artboards are correctly inserted, while one repeats multiple times in a few chapters completely randomly. It has appear only once, but InDesign inserts it many times.
View 2 Replies
View Related
Apr 20, 2012
I'm using LR3.6. Haven't upgraded to 4.1 yet. I created a PS droplet that I want to use in my LR Externa Editor. Everything works fine as far as calling the droplet from LR. However, when I select multiple images in LR, then go to external editor and select "Edit In <droplet name>", wait for the "What do Edit" dialogue box, select "Edit a copy with LR adjustments" and hit "edit", it only takes the very first highlighted image in the selection into PS to run the droplet/actions. Even if I just choose the droplet name as an external editor preset (instead of the "Edit in" option), it still only applies to the first image in the highlighed selection.
On occassions I get lucky and get it to work for multiple images but I can never get it to work again. For instace, I tried it from the Library module (instead of the develop module) and it worked flawlessly. On the next set of images, I could not get it to work again.
I really need to be able to run this over night. By the way, I know that I can use the droplet on Export, but I really want to round trip my images from LR to PS and back into LR without having to Export, run droplet and reimport.
View 4 Replies
View Related
Mar 18, 2012
I just want rendered TIF files. From Bridge I can open them in ACR and save as TIF but then I have the old rendering rather than the new rendering in LR4.
View 3 Replies
View Related
Jan 19, 2012
According to 'About Lightroom;
this is what I'm running:
<Lightroom 3.6, Camera Raw 6.6>
I used to 'merge to panorama', or 'open as layers' in Photoshop regularly, but today it no longer works. When I try, the message comes up: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.6 for full compatibility. Please update the Camera Raw plug-in using the update tool available in the Photoshop help menu."
When I go to Photoshop Help Menu, 'no available updates at this time' is the message that comes up. I manually downloaded the Camera Raw 6.6, but to no avail.
When attempting to edit using PS, the program DOES open, but nothing happens... the files do not appear. They DO open individually when Edit in Photoshop CS4 is selected, but I prefer the 'open in layers' option, and often use the 'merge to panorama'...
View 5 Replies
View Related
Apr 3, 2014
Is there a way to load selected images into PS layers as smart objects?
View 5 Replies
View Related
Mar 6, 2012
LR4 final seems to have a very annoying bug.
When I select a number of images (in the film strip) and either
1) paste settings that I've previously copied from another image or
2) sync settings from one image to the rest
... the settings are not applied to all the selected images. The settings are only applied to a seemingly random subset of the selected images.
I'm going to try to pin down the exact circumstances that make this occur.
[URL]
View 4 Replies
View Related
Jun 19, 2012
The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
View 4 Replies
View Related
Feb 19, 2013
Everytime I want to export pictures it exports every second picture as 0kb.
I've tried to export 100 picture at a time, the same problem occurrs. I've tried only exporting 3 pictures nad most likely atleast 2 of them are 0kb. I've tried all different settings to export the picture. Nothing out of the normal. URL....
The only work around I've found is that I open the image with Edit > In photoshop and then resize and save the image from Photoshop. But that's not the optimal workflow when you have more than 3 pictures. Would be nice to know why this problem comes up and how to fix it. This is really taking me back with publishing my work.
I found several posts about the same issue, but they were all talking about Dropbox being the problem. Well, I'm not exporting my pictures to Dropbox. A normal folder on my SSD HDD.
View 12 Replies
View Related
Mar 16, 2012
The album suppliers that I use all require book pages to be uploaded as JPGs. Lightroom 4 only lets me use Blurb (which I don't want to use), or export to PDF.
I realize that I can import the PDF into Photoshop and save them as JPGs, but when I do so, it saves the left side of the page spread as a file and the right side as a file. Most ROES programs from album suppliers require that pagespread be uploaded as one image that encompasses both the left and right side of the page spread.
I realize that I can go through and merge two JPGs together to create a pagespread, but doing so is time consuiming and requires that I resave each JPG an extra time, thereby losing quality. good way to get pagespread JPGs out of the lightroom book module? how to get pagespreads out of a PDF that looks at each side of the pagespread as a separate image?
View 3 Replies
View Related
Jan 2, 2013
I just received a Asus laptop with Windows 8 for Christmas. I fixed the flickering in CS6 by changing the Preferences and upgraded to Lightroom 4 as was reccomended for Windows 8 to work out the kinks, but I am still having a huge issue with my colors being understaurated. I've tried exporting as sRGB, AdobeRGB, and ProPhoto. The red tones seem to be effected the most. Increasing the saturation and exporting again does not solve my problem.I don't think it's a monitor problem because it looks great in program. Uploading the pictures online do not change the color, so it's not the program Windows uses to open
View 4 Replies
View Related
Jan 8, 2013
I'm new to the photography world and having a bit of trouble when using Lightroom.I have a new Olympus PEN EPL-5 and Lightroom 4.3 running on Windows7.
When I import RAW (.ORF) files they are dark in general, but when export them as JPG they are brighter, similar to what native JPG from the camera looks like. Then if I "correct" the ORF file in Quick Develop or Develop it becomes too light/bright/over-exposed.
Here on the left is the RAW file import with Develop Settings = "none" and to the right is an export to JPG color space "sRGB".Now if I adjust the RAW (.ORF) file in LR I can get it close to the JPG on the right above, but then when I export it, it becomes way too bright
why the RAW Library image is so far off from the exported JPG image?Obviously this "issue" makes using Lightroom very difficult as I can't tell how changes in LR will really turn out once exported.
View 3 Replies
View Related
Jun 19, 2012
After many years of exporting jpegs at 300 ppi my Lightroom suddenly only exports at 72 ppi even though the image resolution is still set to 300 ppi. What could be the problem?
View 1 Replies
View Related
Feb 11, 2013
When using export function my LR4 exports pictures at 0kt every second time.
View 7 Replies
View Related
Mar 17, 2014
With every version of Lightroom including LR5.3, I've continually had a problem with keywords moving out of order in my keyword hierarchy every time I export images to another PC for example or another folder on the same PC. It makes a mess of my keyword list as well as creates more work putting them all back in place.
View 16 Replies
View Related
Jan 24, 2013
My Lightroom 4.3 has, in the last few days, started to automatically export files into my Elements 10 Catalogue. When it does it places them in the wrong folder (the same folder every time) and it does so before I have finished processing in LR. When I delete or move the files in Elements10 the photos in LR show the "missing photo" flag.
View 6 Replies
View Related
May 27, 2013
When I export JPEGs from Lightroom, they display fine on my computer but when I send them to the client, they are not displaying at all. There is a message saying that the software on the clients computer may not be up to date so I tried updating their software but to no avail.
View 4 Replies
View Related
Mar 14, 2012
I am using LR4 german on a Windows 7 (64bit) machine. No preceeding LR installation (except LR4 beta), but all files have been newly imported after clearing the LR4beta catalog.Option 'Export Lightroom hierarchy' is switched off.
If I assign a keyword then it's ancestor is exported, too even though it has the flag 'Include On Export' unchecked.Example: my keyword hierarchy looks like this (tags in all capitals have flag 'Include On Export' unchecked!
EUROPE
- GERMANY
- - BAVARIA
- - - Munich
Now I assign Munich to a photo - only Munich! the Keyword Tag preview window shows only Munich (option 'will export')but when I sync Metadata to the file, also BAVARIA is written to the file.
This is true for all keywords that are a leaf in the keyword tree. Only the next level ancestor is exported by mistake. I assume this is because unchecking flag 'Include On Export' implicitly unchecks the 'Export Containing Keywords' option, too.
Of course my keyword 'Munich' has the option ''Export Containing Keywords' checked because it it the default setting and this seems to override the 'Include On Export' = SPACE setting of the ancestor keyword which I consider to be an error.It is virtually impossible to change each and every keyword in a large Controlley Vocabulary list.
View 11 Replies
View Related
Jul 21, 2013
I frequently export pictures from LR-5 to Phanfare. Up until today this process has gone smoothly. Now, suddenly, the file sizes are small, but with their develop adjustments applied. I use Chrome on an iMAC. Everything is up-to-date. It would appear that the exporter is dipping into the 1:1 previews. If so, how can it be rerouted to the proper source?
View 5 Replies
View Related
Oct 28, 2013
I am using LR4 and have used the adjustment brush for its many uses. 2 Days ago, I discovered that after using the adjustment brush on a RAW file and exporting it to a JPEG, the image looks awful!! its muddy, unpixelated and colors are washed out. Is this a setting that needs to be reset? How can I stop this from happening?
View 3 Replies
View Related
Dec 25, 2012
One of my main complaints with Lightroom 4 is that I can't seem to export video at a custom resolution or bitrate (like dvd size for instance). Am I missing something, or is this really not possible? I hate having to use Handbrake to archive my videos - I wish I could just do it all in Lightroom. I'm using Lightroom 4.3
View 7 Replies
View Related
