I just want rendered TIF files. From Bridge I can open them in ACR and save as TIF but then I have the old rendering rather than the new rendering in LR4.
View 3 RepliesIn Lightroom 4.1 when rating (flags, stars or colors) a selected group of images all images selected will have the same flag applied. For instance if I select 10 images to view in the survey mode to compare and select 1 to be flagged as rejected all 10 will be flagged rejected, not just the one. Is there a way to turn this off to select a group of images and flag each differently?
View 2 Replies View RelatedI'm running LR3 and CS5 on a MBP Lion, and I'm working directly with RAW files. I have adjusted the images in LR and used 'edit in photoshop' to correct blemishes on some photos. I want to apply some presets at the end to render a couple of different looks (B/W and Vintage) to the final edited image. However, I find that after the file comes back from PS, it looks good, but the photo gets 'normalized' and the develop module tools get reset to zero. Hence my presets totally blow the 'edited in photoshop' image while it works just fine on the original raw.
I have also tried to work on the original image prior to any LR adjustments. Same thing, after coming back from PS, both stacked files look similar, but at the time of running the preset, the 'edited in photoshop' file gets blown out.I do not have any auto adjust settings turned on. No presets running on import/export. What am I doing wrong?
I am using Lightroom 4.1. I have recently upgraded my graphics card and now Lightroom won't render any images! There does not appear to be a problem with either Bridge or Photoshop CS5.
View 4 Replies View RelatedLR4.4 Does not render some images (dng) in Loupe view but renders OK in Develop view.
View 2 Replies View RelatedI can't reproduce this consistently; but I've had this happen many times now.
Product - Lightroom 5 on OS/X 10.8.4.
I select two images in the develop module filmstrip to pick the best one for export, the images are usually stacked in the Library.I use the side by side compare tool (C) to compare the images.I may go back to the develop module to adjust setting on one or both images.
At some point I will unselect the image I don't want to export in the filmstrip, then press Command + Shift + E to export.
LR will sometimes export both images even though only one is selected in the filmstrip.
If I go back to the Library before exporting then LR will only export the selected image.
I just imported approximately 1500 raw images shot with my Nikon D800. Approximately 75 of the files would not import and I got LR4 unable to import message for those files.
All images were NEFs and most seem to be in clusters among the 1500 files. The images all show up in CS5 Bridge and Camera Raw 6.7 and open just fine in Photoshop CS5. They will show up in LR4 if I convert them to DNGs.
I just figured out that this is happening only with images that were shot at a 16:9 ratio, all other images were shot at the default 2:3 ratio. I would still like to understand why images shot at 16:9 won't show up in LR4.
I have a behaviour in LR4 that I dont know how to solve.
In the Catalog im supposed to have 11432 images, but when looking in the selection of keywords I only find 10567 when I have seletec all of them.
In the catalog I cant find any images without a keyword so I'm wondering from where this miss match is comming.
Since "upgrading" to lightroom 5.2 I've been plauged by it applying whatever I do to the image I'm on as well as the next image. The second image is not chosen - I only have one image selected. Whether I'm trying to do a correction, a crop, give it a number of stars, edit in Photoshop - it always affects two images at once.
View 3 Replies View RelatedI selected just 1/2 images of a folder, yet LR imports them all anyway.
View 2 Replies View RelatedI am having 2 problems.
When I am in lightroom's library (3.5), I would like to change the time of capture for multiple photos, and apply keywords.
However, when I perform either of those actions, the changes are only applied to the image shown in the "more brightly highlighted" image, not all that are selected.
Is there a setting I am missing? I just cannot seem to figure out why this is not working.
Also, I aplogize if my searching skills are weak and this has been covered already. I did attempt to see if this question has been answered before posting.
Importing images from specific folders is including images from outside selected folders.
View 3 Replies View RelatedI'm using LR3.6. Haven't upgraded to 4.1 yet. I created a PS droplet that I want to use in my LR Externa Editor. Everything works fine as far as calling the droplet from LR. However, when I select multiple images in LR, then go to external editor and select "Edit In <droplet name>", wait for the "What do Edit" dialogue box, select "Edit a copy with LR adjustments" and hit "edit", it only takes the very first highlighted image in the selection into PS to run the droplet/actions. Even if I just choose the droplet name as an external editor preset (instead of the "Edit in" option), it still only applies to the first image in the highlighed selection.
On occassions I get lucky and get it to work for multiple images but I can never get it to work again. For instace, I tried it from the Library module (instead of the develop module) and it worked flawlessly. On the next set of images, I could not get it to work again.
I really need to be able to run this over night. By the way, I know that I can use the droplet on Export, but I really want to round trip my images from LR to PS and back into LR without having to Export, run droplet and reimport.
After applying star/ratings to images, how do you filter your images based on the number of stars you applied?
View 5 Replies View RelatedI'm using LR 4.4 on an iMac with OsX 10.8.3. As suggested in the following link [URL]...I created a Filename Preset with this format: Myname-YYYY-MM-DD-Filename Number Suffix. This preset works as expected when I export files that haven't been edited in Photoshop CS5. However, when I save a file after editing in PS and return to LR the file name look like this: Myname-YYYY-MM-DD-4369-Edit.tif. When I then use my Filename Preset when exporting, LR strips off the "-4369-Edit". I don't care about loosing the "-Edit" but I want to retain the Filename Number Suffix. How can I retain my filename number suffix?
View 2 Replies View RelatedAccording to 'About Lightroom;
this is what I'm running:
<Lightroom 3.6, Camera Raw 6.6>
I used to 'merge to panorama', or 'open as layers' in Photoshop regularly, but today it no longer works. When I try, the message comes up: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.6 for full compatibility. Please update the Camera Raw plug-in using the update tool available in the Photoshop help menu."
When I go to Photoshop Help Menu, 'no available updates at this time' is the message that comes up. I manually downloaded the Camera Raw 6.6, but to no avail.
When attempting to edit using PS, the program DOES open, but nothing happens... the files do not appear. They DO open individually when Edit in Photoshop CS4 is selected, but I prefer the 'open in layers' option, and often use the 'merge to panorama'...
Is there a way to load selected images into PS layers as smart objects?
View 5 Replies View RelatedHow do I remove the white img. number on the top left corner of my images?
View 1 Replies View RelatedLR4 final seems to have a very annoying bug.
When I select a number of images (in the film strip) and either
1) paste settings that I've previously copied from another image or
2) sync settings from one image to the rest
... the settings are not applied to all the selected images. The settings are only applied to a seemingly random subset of the selected images.
I'm going to try to pin down the exact circumstances that make this occur.
[URL]
The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
I have a filmstrip of 500 plus images. Sometimes I need to "Edit in an external editor" on an image, in my case Elements 11. On selecting, EDIT IN, the original image plus the Elements 11 editied image move along to the end of the filmstrip. I then have to go to LIBRARY module, grid view and move both of these images back to their original location at the filmstrip. That is ok if you only have a few images but time consuming when you have 500 images.
View 1 Replies View RelatedIf I use the magic wand on an image to select a number of distinct regions of a particular intensity (this part I can do), is it possible to obtain a count of how many unique regions were selected?
View 2 Replies View RelatedI have a system of labeling my images to differentiate between the source files and the final edit images, but sometimes I need to apply different labels if there is something that's not ordinary to my process. My problem is that when I go back through my archive to look for something, I forget why I lebeled something a different color. I've been creating JPG's in Photoshop with notes for that specific job, but that's getting to be a pain.
It would be great to be able to create a note within Lightroom that I can view while I'm thumbing through my images.
I've written a script to allow you to select an image to replace any number of selected files. Each file starts out as an embeded image with a .note to determine where the basis of alignment for the new file should be (i.e. "top," "bottom," "left," "right"). You'll find the code below:
#target illustrator
if (app.documents.length > 0) {
var docRef=app.activeDocument;
var docSelection = docRef.selection;
// ** Get new file
[Code]...
For some reason, the ".note" added at the end of the script gets erased once the script is complete. I can even get it to confirm that it applied the note to the image, but once it's complete, it's gone.
I am looking for a way to extract (filter) all polylines, and loop a lisp based on the number that are found within a "W" selection window.I am frustrated getting "malformed list" or errors, even after defining "n" for repeat.The code I have so far looks like this:
(defun cWW (/ p1 p2 sspw myObj ss)
(setq p1 (getpoint "
Pick first corner: "))
(setq p2 (getcorner p1 "
Specify opposite corner: "))
(if
(setq sspw (ssget "W" p1 p2 '((0 . "*POLYLINE")))
[code].....
Without the (repeat () portion, it was working ok with selection window, however it only would run the commands for a single polyline. What needs to be done without overhauling the code? The lisp has worked on a drawing-wide basis, however needs to run on only on user-windowed polylines since there are other polylines within the drawing which are attached to layouts via viewports.
I am having difficulty with the display of my point numbers and description when plotting. I am doing piping desing and utilizing Civil 3D points for the coardinates and elevations to display in a point table. For my viewport, in the properties dialogue box, under the Shade Plot option, I have selected Legacy Hidden due to needing my pipes to display properly only to have my points not display properly. If I opt for Legacy Wireframe or As Displayed, my points display correctly but my pipes do not. Any clue as to how I can have both display properly?
View 4 Replies View RelatedProblem:
How to read real number data from selected columns in an Excel spreadsheet into an illustrator javascript array variable, so that then I can use this information to construct an illustrator polygon.
Further information:
I am new to javascript (and not much of a programmer in the best case, but do have some basic knowledge using ancient languages like FORTRAN 88). I am sure I am just missing an important step here despite all morning browsing with Google for answers (something to do with variable definition I assume?). I have some survey data defining the outline of features in map view listed in a string of point (x,y) values in adjacent columns in excel (these x,y point values calculated from GPS data using a commercial program to converted 3D position to a 2D x,y by geoid projection, and then in excel to re-scale point locations to illustrator’s artboard). What I am trying to do is select columns of x,y value pairs in an excel spreadsheet, copy these values to the clipboard, and then develop an IA JavaScript to draw a polygon through the specified set of x,y points. It seems easy enough to script illustrator to draw the polygon once I get the values from the clipboard are in a javascript array (lots a good tips here [URL] ....), but pulling in the clipboard data seems to be beyond me. I have tried populating a defined array with various combinations of array declarations and app.paste(); or windows.clipboardData.getData('text/plain'); with no satisfaction. I then had the idea to try to pull in the clipboard to one long continuous string, place that in a text box (see see its structure), andthen read and split up the text in a loop to populate the JavaScript array…but that deposited a complex illustrator table object into my text box, and several attempts to force the clipboard to paste text did not work (again probably having problems understanding variable type declaration).
I would be happy to find any method of scripting the pull of the selected on an excel spreadsheet for use in an Illustrator script…so if I am making this all harder than it needs, be I would be grateful to know that also!
On LR 4 and now 5, the shades of grey used to distinguish the selected vs, not selected images in the filmstrip at the bottom of the workspace are too close together making it difficult to see what has been selected. Is there someway to control the color and/or the shade of grey used for each to make it easier to tell at a glance which image(s) is currently selected?
View 1 Replies View RelatedI can't find how to add or edit render video presets used in (File->Export->Render Video) dialog.
Am I missing something?
how can i edit on layers on a number of document
View 2 Replies View Related