We have standard port details in JPG format that we frequently embed into a drawing via Manage -> Insert Object -> Create From File.
We've discovered that the JPG image does not display in Inventor View (which our co-workers use to view/print drawings).
I've run in to a strange problem since the 4.1 upgrade.When displayed in the Library view, images are not appearing correctly. In my case, there is a huge amount more noise in the Library view compared to the Develop view. This is also affecting Exports.
View 7 Replies View RelatedHaving issues using the accoreconsole.exe, to batch plot drawing to pdf?
none of our embedded images/logos get plotted. im guessing it doesn't support images yet.
i was excited about this addition (it would save me hours a week), but not anymore back to the publisher we go
I have problems printing successfully the raster embedded images within a dwg file using the xerox 6279 accxes controller plotter. I use the 6279 hpgl/2 v 15.0.5 driver but when the file is longer than 1 meter long i lose the embedded images or are misplaced anywere in the drawing. I have also the same problem using other similar files with embedded ratser images
View 1 Replies View RelatedIs there any way of viewing and playing embedded wav files in LR5 like you can in bridge?
View 1 Replies View RelatedI retouch all my images in photoshop from lightroom so they appear next to the raw file in lightroom when I come back. Depending on where the images will be printed they can have a different embedded profiles. without having to include the profile used in the naming of the file my question is:
Is there a way of viewing the file's embedded profile from within lightroom without having to re-open in photoshop to see?
I have a 2013 Civil 3D file, in which I've generated a set of multiple profile views, using a proposed centerline of a new pipeline as the alignment, and the existing grade surface. The profile views are just fine. However, there is also an existing underground electric service running roughly parallel to this proposed pipeline.
All I have to work with is a 3D polyline which shows the location and elevation of that electrical service line. Here's my issue: Right now the profile view(s) display on only the existing grade along the pipeline alignment, and that's fine. I would also like these profile views to display the location of the above described electrical line, but don't know how to get the profile view(s) to "see" it.
Using 2012, latest SP. I have a master drawing @ 1:500 with alignment, prof's, corr, etc. I have a second drawing @ 1:200 to be used for section views. I've data referenced the alignment, prof's, srf's, etc. I've created the section views in the section view dwg and xref'd the master dwg.
My problem is that the corridor model will not display in section views anywhere along a spiral in the 1:200 dwg. It displays fine everywhere else along the alignment. Just not spirals.
I have section views in the master drawing that will display the corridor just fine in section view at these same stations along the spirals.
Saw something in a magazine the other day: photos of products with a "smart phone" icon and caption saying "Scan this photo to be shown a video (or product info)."
Am I right in thinking that some kind of QR-type code is embedded within the printer dots of those photographs? And, can we produce such images in Photoshop (CS6)?
For some reason some of my files are displaying as black and white in Layout view. The files display as they should in color in model space. These files contain color layers but the color can only be viewed in Paper space when I select an object and am moving it.
View 4 Replies View RelatedI've drawn a profile and would like to show the elevations of each surface selected in different bands. I've set up the bands easily enough though when they display on the section I've got two levels either side of the chainage line one with 0.01 precision and one with 0.001 precision - I only want to display one. I've tried fiddling with the Profile View Properties but don't seem to be getting very far..
View 3 Replies View RelatedI have an illustrtor documcnet which is one quater of the size it will be printed at (50 * 12.5 cm up to 2 * 0.5 m).
It is at one quater on request of the company printing the banner. It has a high res texture image (embedded) on the babk layer and the rest is all vectors.
When the image is printed (and scaled up 400% in the process) will the high res image be printed at the highest resolution available? If not is there an easy way to scale my artboard guides, all objects and effects up by 400%.
I have some embedded images in Frame Maker that I need to edit in Photoshop. I copy the image from FM and paste it as a new image into Photoshop. Most of the time its OK, but sometimes it comes up like this, or worse.
It should look like this.
Pasting the image into any other program (i.e. Word, Visio, Paintbrush) works, but it takes more time to fix it, the size is usually off and needs adjusting, and the output is of lower quality.
In FM, the images that seem to do this are JPEG / Frame Vector or PNG / Frame Vector according to the Facets field.
I am doing some freelance work and the client sent me several .ai files. They were a mess, and should have been created in InDesign to begin with, so I transferred them over. At the time, I copied and pasted the links, but of course, the images don't show up in the links panel in InDesign. I'm assuming this will be an issue for printing, is that right?
I went to find the original links, and couldn't find them anywhere in the folders I was given. When I looked at the .ai files I was given, I found out that the images were embedded. When I select an image, I cannot choose to "update link" or "edit original." Those options are grayed out.
How do I get those embedded images to InDesign in an appropriate format for printing?
I am working on a file that has some shapes with gaussian blurs. Everything appears fine until I save it and reopen the file to see that each of the objects with a blur has been converted to an embedded link as a raster image. Is there a setting that I need to change to preserve the vector shapes with the blur effects?
View 2 Replies View RelatedI'm using Illustrator to crop and arrange a number of raster images. However, I'm starting to have file management problems, because the Illustrator files quickly balloon in size.
Example: I got public domain jpg image of a deer off the Wikimedia Commons. This jpg image is 0.35MB. I opened up a new Illustrator document, placed and embedded the image, and saved the document (with the 'pdf compatible box' unchecked). The resulting Illustrator file is 7.7MB in size, over 20 times the size of the embedded jpg image.
I've looked around these forum, but other than the 'pdf compatible box', I couldn't find any good solutions. Is there some other option or preference that I could tweak? I need to use embedded images rather than links, but the files are getting out of control (>100MB).
The screen capture at the end of this post shows the situation. In the top folder in the screencapture, the image file is highlighted, so you can see the filesize. In the lower folder in the screencapture, the Illustrator file is highlighted, so you can see it's filesize. Then you can see the open Illustrator document on the right. (edit: the forum software is no longer allowing me to add images, so I've put the screencapture on Google Drive here: [URL]
The .ai file with the embedded image is here: [URL]
I'm using Illustrator CS6 64-bit, v16.0.3 on Windows 8-64.
I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...
Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...
I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.
We struggle a bit creating a seamless repeating pattern that includes embedded images with clipping masks applied.Our pattern is a 550x550mm black square with various embedded inserted on top. All of these images have Clipping Masks applied to hide unwanted areas.These images are placed so they create a seamless repeating pattern and this includes areas that overlap the square.Once we create a swatch from this pattern the repeatable area becomes too big as it includes the unwanted areas hidden by the clipping masks.Because the repeatable area is now too big it's actually not repeatable.
Pathfinder/crop to delete the unwanted areas in the images etc.We though of just live tracing the images, but due to the complexity this is not an option.Do we really have to do our "cutting" in Photoshop .
Is there any way you can access an AutoCAD file embedded in an IDW by using VBA?I have an IDW with about 100 sheets; it would like to control which file is embedded in each of the sheets.
The best would be to use linked files but I do not know how to make certain files visible on certain sheets.
I have an Embedded spreadsheet in a .ipt file. I want to access the data in it using iLogic, but i keep getting this error...
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
Do I need to declare the spreadsheet somehow, or is there something else I missing? This is the only code I have in the rule...
i = GoExcel.FindRow("3rd Party:Embedding 1", "Sheet1", "ID", "=", 1
I have used the command "insert object" to embed an excel sheet. I can see in the modelbar the new stage called "3rd Party", expanded I also see "Embedding 1". If I use edit I can see my excel sheet. So far good.
My next task is to create a Rule to recall cells in the sheet. I use the command CellValue (embedded) to pick my cell value. My problem is that then I close my rule-editor I got the error:
Error in rule: Rule0, in document: Box test.ipt
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
It seems like I´m not able to recall my cellvalues.Whats the difference between embedding a excelsheet as above or use the add link command i Parameters window?
When inserting object - xls file, i found trouble, max. number of column i see in dwg file is 22.
Creating table using table - general require long time for set up every column (different with)
I have an embedded Excel file in my dwg file. I'd like to make it visible on the drawing. On the drawing though, it only displays however many rows existed when the sheet was inserted.
For example, when I clicked "Insert Object", only 1 row existed in the Excel sheet. I've now added 10 more rows, but still only the first row is visible.
How can I make the table on the drawing display the full view of the Excel file?
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
Is it possible to open an embedded XL sheet with iLogic ?
I tried "GoExcel.Open("3rd Party:Embedding 2", "ENTREE DES DONNEES"), but nothing happen...
I'd like to create pdf's with the 3D model embedded. This could then be viewed, rotated, and Zoomed.
Tetra4D is the software to do this as Adobe X no longer supports it.
How do you people constantly attach images to your posts? The feature only way I can see allows up to 768000 bytes, and I can't for the life of me get an image (.jpg) down to that little... do you guys use some compression program, or does the size limit increase by posts or something? I'm having problems posting stuff in other threads, so I thought I'd ask. ^^
View 7 Replies View RelatedI am learning Corel’s PSPPX3 by reading Diane Koers’ book titled “Picture Yourself Learning Corel PSPPX3.”
According to Diane, in Organizer View, a General Information Panel should be displayed on the right.
My view does not display the panel.
For Creating my own templates i want to use iLogic and embedded Excel-Spreadsheets. The embedded Sheet has its own data, but i want to create a rule to refresh the data from an external Excelsheet.
For now i use the following rule:
For I = 65 To 90 '65=A 90=ZBuchstabe = Chr(I) GoExcel.CellValues("3rd Party:Embedding 1", "Platte", Buchstabe & "1", Buchstabe & "999") = GoExcel.CellValues("G:KonstruktionVorlagenMaterialgrunddaten.xlsx", "Platte", Buchstabe & "1", Buchstabe & "A999")Next I
it works well, but wont insert a new single-sheet or refresh formats, i have to add the same code for each sheet. And its REALLY slow.
Is there a possibility to refresh or replace the whole embedded file via a simple iLogic-rule?
How to use an embedded cursor (mycursor.cur) via the SetCursor command under user interaction events. I can use built in cursors just not able to get it working with my resource.
Sample below throws an error type mismatch.
oInteraction.SetCursor(CursorTypeEnum.kCursorTypeCustom, My.Resources.mycursor)
I have set the build action of the cursor to be embedded.
i open a image file in Photoshop CS4 it looks all jumbled and has diagnol lines going through it. Even when i open just a blank file it has a huge black triangle going through it.
View 3 Replies View RelatedI have some code (below) that will open my embedded excel spread sheet and it works great. Now I need the code to save and close the excel file after it’s been open.The embedded excel spreadsheet pushes some stuff the model and does a couple other thing. So all I really need is for the excel file to open, save, and close when the rule is run.Imports Inventor.
OLEDocumentTypeEnumExcelApp = CreateObject("Excel.Application")Dim ExcelFile As ReferencedOLEFileDescriptorExcelFile
=hisDoc.Document.ReferencedOLEFileDescriptors.Item(1)ExcelFile.Activate(kEditOpenOLEVerb, ExcelApp)