Is there any way you can access an AutoCAD file embedded in an IDW by using VBA?I have an IDW with about 100 sheets; it would like to control which file is embedded in each of the sheets.
The best would be to use linked files but I do not know how to make certain files visible on certain sheets.
I have used the command "insert object" to embed an excel sheet. I can see in the modelbar the new stage called "3rd Party", expanded I also see "Embedding 1". If I use edit I can see my excel sheet. So far good.
My next task is to create a Rule to recall cells in the sheet. I use the command CellValue (embedded) to pick my cell value. My problem is that then I close my rule-editor I got the error:
Error in rule: Rule0, in document: Box test.ipt
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
It seems like I´m not able to recall my cellvalues.Whats the difference between embedding a excelsheet as above or use the add link command i Parameters window?
When inserting object - xls file, i found trouble, max. number of column i see in dwg file is 22.
Creating table using table - general require long time for set up every column (different with)
I've been very dissapointed with the 'new file' dialog box in inventor 2013 as it takes far too long to open and navigate. I was wondering if there is a way to add a link to a few drawing template files either to the ribbon or the quick access tool bar so i can avoid using the 'new file' dialog box.
View 1 Replies View RelatedWe are attempting to access the file naming prefix in documents settings but i am unable to start code or find away to get where i need.
We have a multi solid bodie part that changes on via suppression to different styles of profile we then need the file naming prefix to chage depending on what key have selected .
ie Parameter = Style with 4 Multi selctions 1,2,3,4
depending on selection picked we then need to change the Solid Bodies Prefix in document settings..
Example :: If style = 1 then Solid Bodies Prefix = Dave
Just loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.
View 4 Replies View RelatedIf I copy a single line from a file then paste it into a new file with nothing in it and save, I end up with a 3 or 4 meg file. I noticed when I paste the line into the new drawing, I get the following message over and over:
Substituting [simplex.shx] for [OA_Edina.shx].
Substituting [simplex.shx] for [OA_2007.shx].
We have files that are 20 or 30 meg that should only be 1 or 2 meg. Purge and audit in the .dwg does not work. One way to fix it is to dxfout then purge and audit the .dxf file, then save back to .dwg. The audit typically finds tens of thousands of errors. This process takes a long time and the problem comes back as soon as someone copies something into the file. We need a more permanent fix.
I have problems printing successfully the raster embedded images within a dwg file using the xerox 6279 accxes controller plotter. I use the 6279 hpgl/2 v 15.0.5 driver but when the file is longer than 1 meter long i lose the embedded images or are misplaced anywere in the drawing. I have also the same problem using other similar files with embedded ratser images
View 1 Replies View RelatedI'm looking for a way to add custom data in dwf files. We currently create 3D models which get exported to dwf format so that we can share information with clients. Ideally, we'd like them to be able to click on any member and have the software provide additonal information about that part. Example, part number. It would be awesome if the client could then say double click that part and have the actual detailed part drawing open up.
The parts we are trying to reference are generated using a third party application, so they are not solids, but the information is easily accessible in LISP.
I have an Embedded spreadsheet in a .ipt file. I want to access the data in it using iLogic, but i keep getting this error...
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
Do I need to declare the spreadsheet somehow, or is there something else I missing? This is the only code I have in the rule...
i = GoExcel.FindRow("3rd Party:Embedding 1", "Sheet1", "ID", "=", 1
I have an embedded Excel file in my dwg file. I'd like to make it visible on the drawing. On the drawing though, it only displays however many rows existed when the sheet was inserted.
For example, when I clicked "Insert Object", only 1 row existed in the Excel sheet. I've now added 10 more rows, but still only the first row is visible.
How can I make the table on the drawing display the full view of the Excel file?
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
Is it possible to open an embedded XL sheet with iLogic ?
I tried "GoExcel.Open("3rd Party:Embedding 2", "ENTREE DES DONNEES"), but nothing happen...
We have standard port details in JPG format that we frequently embed into a drawing via Manage -> Insert Object -> Create From File.
We've discovered that the JPG image does not display in Inventor View (which our co-workers use to view/print drawings).
I'd like to create pdf's with the 3D model embedded. This could then be viewed, rotated, and Zoomed.
Tetra4D is the software to do this as Adobe X no longer supports it.
Why does Lightroom 5 show "embedded" as an option for camera profile for .dng files created by my pentax k-30? I thought that "embedded" profiles did not apply to .dng files?
View 7 Replies View RelatedFor Creating my own templates i want to use iLogic and embedded Excel-Spreadsheets. The embedded Sheet has its own data, but i want to create a rule to refresh the data from an external Excelsheet.
For now i use the following rule:
For I = 65 To 90 '65=A 90=ZBuchstabe = Chr(I) GoExcel.CellValues("3rd Party:Embedding 1", "Platte", Buchstabe & "1", Buchstabe & "999") = GoExcel.CellValues("G:KonstruktionVorlagenMaterialgrunddaten.xlsx", "Platte", Buchstabe & "1", Buchstabe & "A999")Next I
it works well, but wont insert a new single-sheet or refresh formats, i have to add the same code for each sheet. And its REALLY slow.
Is there a possibility to refresh or replace the whole embedded file via a simple iLogic-rule?
How to use an embedded cursor (mycursor.cur) via the SetCursor command under user interaction events. I can use built in cursors just not able to get it working with my resource.
Sample below throws an error type mismatch.
oInteraction.SetCursor(CursorTypeEnum.kCursorTypeCustom, My.Resources.mycursor)
I have set the build action of the cursor to be embedded.
I have been using an AI template to produce a lot of art as SVGs. The source Illustrator file has a bottom art layer, and several layers above that (6) which have a small PNG image that is basically a simple gray button. The same PNG is shown as embedded 6 times and then saved out as an SVG with the options of Profile: SVG 1.1; Type: Convert to outline; Image Location: Embed; CSS Properties: Presentation Attributes; Decimal Places: 3; Encoding: Unicode (UTF-8) and Include XMP is checked.
Some of these resulting files have since stopped working, and upon opening, display the error "Could not find link "05AE065BE.png".
The file is not linked, and the requested file name is generated randomly. The file shows no gray button PNGs, just the empty sublayer that they are on.
I've gone round and round on how this is happening, and have only found information on file character limits and even file path character limits, and server character limits. The file name of the embedded PNG is 27 characters, and the crazy file path and file name totals 137 characters.
Why would an embedded file be causing a linking error and random renaming of the embedded file? And also, why is it only happening on some of the files and not all of them? They are built identically within minutes and batch processed!
I am having a very strange problem in illustrator and I can't work out what is wrong.
Before in a previous version when I embedded a barcode into an .ai file the barcode was fine but now in my new CS6 the stroke sizes go "mad" and resize?
Is there some sort of setting I am not selecting? I need to embed ALL images / barcodes into the packaging design as I need to send it to china for printing. (and create outlines - but can't do this until the barcode has first been embedded)
I have some code (below) that will open my embedded excel spread sheet and it works great. Now I need the code to save and close the excel file after it’s been open.The embedded excel spreadsheet pushes some stuff the model and does a couple other thing. So all I really need is for the excel file to open, save, and close when the rule is run.Imports Inventor.
OLEDocumentTypeEnumExcelApp = CreateObject("Excel.Application")Dim ExcelFile As ReferencedOLEFileDescriptorExcelFile
=hisDoc.Document.ReferencedOLEFileDescriptors.Item(1)ExcelFile.Activate(kEditOpenOLEVerb, ExcelApp)
I have a MultiValue Parameter that I want to populate using a named range from an embedded excel spreadsheet. I would like an iLogic solution if possible because I need other people to be able to understand the code without too much difficulty.
One of the sample snippets given allows access but not if the excel file is embedded.
'GoExcel.NamedRangeValue("Part_Width")
The code below works but not when using a named range.
' Load bearing housing typesMultiValue.List("parameter1") = GoExcel.CellValues("A1","A20")
Is there something I'm missing? I was hoping to use something like below
' Populate MultiValue Parameter from excelMultiValue.List("parameter1") = GoExcel.CellValues("3rd Party:Embedding 4", "Sheet", "myNamedRange")
I'm using Illustrator to crop and arrange a number of raster images. However, I'm starting to have file management problems, because the Illustrator files quickly balloon in size.
Example: I got public domain jpg image of a deer off the Wikimedia Commons. This jpg image is 0.35MB. I opened up a new Illustrator document, placed and embedded the image, and saved the document (with the 'pdf compatible box' unchecked). The resulting Illustrator file is 7.7MB in size, over 20 times the size of the embedded jpg image.
I've looked around these forum, but other than the 'pdf compatible box', I couldn't find any good solutions. Is there some other option or preference that I could tweak? I need to use embedded images rather than links, but the files are getting out of control (>100MB).
The screen capture at the end of this post shows the situation. In the top folder in the screencapture, the image file is highlighted, so you can see the filesize. In the lower folder in the screencapture, the Illustrator file is highlighted, so you can see it's filesize. Then you can see the open Illustrator document on the right. (edit: the forum software is no longer allowing me to add images, so I've put the screencapture on Google Drive here: [URL]
The .ai file with the embedded image is here: [URL]
I'm using Illustrator CS6 64-bit, v16.0.3 on Windows 8-64.
I have created a piece of artwork in illustrator which is to be printed 4x3m for a wall mural. Therefore the file I am working with must either be a vecor or a large enough raster to be printed at such as size. I have set it up at 1 to 10 so its currently A3ish size. Each component of the collage is a separate ai file and contains many points as they are all live traces. It was no problem linking in all these initially but I now need to embed them so as I can give the printers a complete file. I have succeeded embedding every image apart from one last complex one which is crashing the whole thing. Are there any settings I may be able to change to reduce the file size or simplify the graphic (whilst remaining vectors.) Below is the file with the linked images and also the outline of the embedded version so far. The problem I am having is basically because of the final output size required.
The only thing I can think of doing is opening each separate component and saving as a raster then relinking these - but will this be even more problematic for illustrator that thousands of vector points? I can do it in photoshop if needs be but as the final image is to be printed 4x3m will this be too large to handle? The ai file with all images linked was 25MB but now 500MB with the sky still to embed.
I have a jpg file that I must use as a background in a Dreamweaver project. There is some text embedded in it that I can't edit. I have tried using Illustrator and Photoshop but I lack experience so I'm probably missing something.
The file address is lecaff.fr/images/home_banner.jpg
I have previously written an assembly (netload) application for our document management system for our office. This assembly loaded a sheet set file (dst) and read / manipulated / saved and exported data. It was very slow.
I was wondering before I progress a reimplementation if it is possible to have external application access to the dst file using the various dll files and lib files (autodesk shared / application root and object arx 2010 - 2012), and if so, which ones.
I have tried to use the same references I used for my 2010 / 2012 netload assembly but I am receiving errors like "FileNotFoundException was unhandled" I belive I have traced this to the issue that I need more or specific references in addition to:
acdbmgd.dll (.net)
acmgd.dll (.net)
acsmcomponents18 1.0 type library (com)
autodesk.autocad.interop.common (com)
the actual error message when I open a dst file is:
System.IO.FileNotFoundException was unhandled Message=Retrieving the COM class factory for component with CLSID {DA236FEC-D990-4825-95FA-651AF4C2B407} failed due to the following error: 8007007e The specified module could not be found. (Exception from HRESULT: 0x8007007E). Source=mscorlib StackTrace: at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& [code]........
And it is occurring here:
Imports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.WindowsImports ACSMCOMPONENTS18LibImports System.Windows.FormsImports SystemPublic Class Form1 Private Sub
[code].......
I would like to know if it is possible to save changes directly in the source data base file (Access) from Auto Cad Map.
I have a polyline draw (Footpath network). I have converted this draw to shapefile, and then I connect it to the Access Data Base via ODBC with a join.
The problem is that this shapefile is not definitive, and it is probably that some people will need to edit and create new features, and I don´t know how to do it.
Which would be the best option to do this? It would be better if I work with the dwg drawings and the data sources?.
I have an international group that is using a VPN tunnel to access our servers to work on .dwg files. Every so often, ACAD "seems" to crash however, it is really or appears to be timing out on accessing file information. Of course, this depends on bandwidth usage and is intermittent because of this reason.
How to change the file request/access timeout in ACAD?
I'm assuming it's a registry hack.
Info: Our international group is using AutoCAD Architecture 2014 on Windows 7 64bit computers.
I want to access the solid opened in AutoCAD from dwg file using C++ and Object ARX.
View 3 Replies View RelatedI believe a dwg I am trying to access is affected by the acad.vlx virus as an alert comes up to check autodesk for solution (ID: TS13717811) however the published solution doesn't seem to work for the latest version of AutoCAD LT 2012 as it asks me to access a file in the support folder which doesn't exist on my system.
View 7 Replies View RelatedI'm trying to get the autoloader working. [URL] .....
Looks like it's a 'fairly' new addition and dead simple but..
All I need to do is add a single resource folder in the bundle and to the xml file to be able to access the files in the dll.
How to modify the xml file and refer to this folder in the dll?
<?xml version="1.0" encoding="utf-8" ?><ApplicationPackage SchemaVersion="1.0" > <Components> <ComponentEntry AppName="DOTNETTEST2" ModuleName="./Contents/AutoloaderDotNetSample2.dll" LoadOnCommandInvocation="True" > <Commands GroupName="DevDays2010"> <Command Global="DOTNETTEST2" Local="DOTNETTEST2" /> </Commands> </ComponentEntry> </Components></ApplicationPackage>
I can't remember where I got the resource files from.
Here is the DevCast for creating the installer. [URL] ....
Also is there a way to change the path depending on whether or not you are debugging?
In VB6 I used a function
Public Function IsIDE() As Boolean 'Returns boolean value of True if not compiled IsIDE = (App.LogMode = 0)End Function
I have just installed C3D 2012 and when I show the menu bar, the only choice is Express which used to be the last tool in previous versions. What happened to File - Edit - View - Insert - Format, etc in the menu bar? I need to access them.
View 4 Replies View Related
