I retouch all my images in photoshop from lightroom so they appear next to the raw file in lightroom when I come back. Depending on where the images will be printed they can have a different embedded profiles. without having to include the profile used in the naming of the file my question is:
Is there a way of viewing the file's embedded profile from within lightroom without having to re-open in photoshop to see?
Is there any way of viewing and playing embedded wav files in LR5 like you can in bridge?
View 1 Replies View RelatedOne of my Illustrator CS6 documents was intially created some time ago without paying much attention to colour management issues. I am now trying to put that right and have assigned the document a profile of Adobe RGB (i998). However, each time I open it I am warned that 'The document has an embedded color profile that does not match the current RGB working space'. It also says that the embedded profile is sRGB, while my working space is Adobe RGB. I get this message three times and am assuming that it refers to embedded objects.
Do I have to reimport all items that may have a colour profile, having first ensured that they are tagged as AdobeRGB?
Why does Lightroom 5 show "embedded" as an option for camera profile for .dng files created by my pentax k-30? I thought that "embedded" profiles did not apply to .dng files?
View 7 Replies View RelatedI installed LR5 from LR4 yesterday and each time I open an image in CS5 from my LR5, I get the following message:
The document "IMG_9082.CR2"has an embedded color profile that does not match the current RGB working space.
Embedded: Adobe RGB (1998)
Working sRGB IEC61966-2.1
What would you like to do?
-Use the embedded profiel (instead of the working space)
-Convert documents's colors to the working space
-Discard the embedded profile (don't color manage)
My camera's settings have it set with sRGB, LR4 and LR5 have sRGB and I have CS5 workspace as sRGB. This did not happen before.
Is it possible that when LR5 updated the LR4 catalogue, it changed the profile of all my photos? I don't know, maybe I've done something, but I can't see what as I don't remember changing anything.
Each time I open a file in AI - CS3 I get the same message: "Missing Profile - The doc does not have an embedded CMYK profile". I looked in library>colorsync>profiles and sure enough they were gone? I downloaded new profiles from Adobe, installed them in library>colorsync>profiles - and still the same thing with each file I open. I dragged AI to the trash, re-installed AI from my disc repeated the process with the same results .
View 10 Replies View RelatedThe color workspace of Lr is linear ProPhoto. If we have a TIFF file with the embedded color profile, like ProPhoto 1.8, does Lr use embedded color space (Prophoto 1.8 in this case) as workspace instead of its standard workspace?
View 19 Replies View Relatedhow to print A3 size borderless portriat using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of lenght wise.
View 4 Replies View Related I haven't had this problem in CS5 photoshop but when I upgraded to CS6 photoshop I followed the recommended settings like using ProPhoto RBG.I edit in the working space colour management but not always have the same results on screen...have calibrated my monitor.
Then when it does look correct on screen and I re-import into Photoshop, my picture turns out bright red and I need to use Adobe RBG (1998). I am saving the pictures with the profile embedded, works better with Adobe RBG.What should I be using as the settings as well as management policies - currently Preserve Embedded Profiles?I don't want to have nice looking pictures in Photoshop and then have them print incorrectly or look terrible on another monitor
I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
I'm using CS6, I do not see any picture (png, jpg or psd) in the workspace. It says Embedded Profile Mismatch or Missing Profile when I try to open. Pictures seem on Layers although I can only see a transparent screen in the workspace. When I convert it into CMYK, I can see the picture. I can not find the problem and I need Photoshop.
[URL].........
I don't understand why Photoshop CS6 says that my embedded profile is adobeRGB, because I have changed it to sRGB. I have changed it also on my camera from adobeRGB to sRGB. And my color setting in Photoshop I have changed from adobe RGB to sRGB.
So why does the program say that the color profile does not match? Or maybe I shpuld change something in bridge?
I've recently been getting the following warning when opening an image (photo). I've only made one adjustment recently, disabled color management.
I'm using CS2 and would appreciate your assistance since I couldn't find a thread specific to the subject in my search.
I'm using ps3 and after loading my pics from my camera into photoshop i get this message on every photo that i open. I use the spyder2 to calibrate my montor and have that set as my default profile. In photoshop it shows the embedded sRGB and some number. Is there a setting that i can change that will change the photos to the spyderexpress 2 profile in photoshop.
View 5 Replies View RelatedEverytime I open a .jpg file, a popup comes up that says that. Is there anyway to just have it automatically not have one or to embed one? Or just ignore it completely?
View 3 Replies View Relatedlately everytime i open a file in photoshop I am getting a pop up saying that the document has an embbeded color profile that does not match the current RGB working space. How can I not have that pop up everytime i open a document?
View 1 Replies View RelatedI have done some photography for a preexisting series.
The existing files are embedded with a unique colour profile, I ideally need to use that profile so that the new photography exactly matches colour wise, as I will be using some elements from the original files.
Is there any way to save the embedded profile, so that I can apply it to any new files that I work on?
I used photoshop to open a JPG file and I got this warning dialog box message:
================================================
The document "xxx" has an embedded color profile that does not match the current RGB working space.
Embedded: Internal RGB KODAK sRGB Display
Working: sRGB IEC61966-2.1
================================================
Then I was offered by 3 options in the dialog box:
1. Use the embedded profile (instead of the working space).
2. Convert document's color to working space.
3. Discard the embedded profile (don't color manage).
The questions:
a. What should I choose between the three options?
b. What is the functionality of the embedded Profile?
c. Is Embedded Profile equal to ICC profile?
I try and open any of my old images (or new ones for that matter) I get this dialog box:
The document "Architecture.jpg" has an embedded color profile that does not match the current RGB working space. The embedded profile will be used instead of the working space.
Embedded: sRGB IEC61966-2.1
Working: Adobe RGB (1998)
Does LCP work with PSE 11 Camera Raw. If so, how is it used. How is "Embedded" changed to the specific camera/lens profile
View 2 Replies View RelatedHow do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies View RelatedWe have standard port details in JPG format that we frequently embed into a drawing via Manage -> Insert Object -> Create From File.
We've discovered that the JPG image does not display in Inventor View (which our co-workers use to view/print drawings).
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedI try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
A tabular data sheet for profiles could be very interesting.
Civil 3D (2013)
I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport. The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into. But when I switch from model space to paper space in my layout sheet (the file the profile dwg is referenced into) the profile moves to the wrong station within my profile view in paper space.
The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.
The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.
I am a C3D newbie who used ground survey points (Serrano_EG_surface) that generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then into individual CL alignments. The first alignment ,which has its left and right offsets do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.
1. Are the ground survey points good enough so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a preliminary drawing for environmental permitting. ?
2. When I check the object browser, the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.
3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).
4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?