how to print A3 size borderless portriat using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of lenght wise.
View 4 RepliesI'm using LR4 current version on a Lion machine (also current version) - IMAC 27" (also current version) with an Epson 9880 printer. Currently trying this with the Lion driver and version 6.1.2 Epson profiles. I've also tried this with the most recent Snow Leopard driver with the same results. The profiles are not showing up in the "other" dialog within LR4. They do show up in printer setup. I also have a 4800 here and that is working fine. I notice that the Color Sync utility is not displaying them. I've tried downloading and reinstalling, restarting, etc. - no change. I don't recall this being a problem with LR3.
I have been using the Snow Leopard profiles because of the problems associated with the shaded color/BW print dialog in the Lion printer dialogs, for what that's worth, and I thought everything was fine but now,
Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
The subtitle should be "How do I choose the best profile without wasting a lot of time and paper?"
I have an Epson R3000 using Epson premium glossy paper. I am printing from Lightroom (and Photoshop). My understanding has been that the best color match would come from using the Epson appropriate paper profile and letting LR manage the color. However, my output, especially for skin tones had a distinct magenta color cast and really looked terrible. I spent a few hours rechecking settings and making test prints to confirm settings such as turning off color management in the printer. Finally, I called Adobe support. They were very useful and by changing the printer profile from Epson 'spr premium glossy' to my monitor (which is calibrated) profile, I actually get output that matches my screen pretty well. The bothersome part is that I came away with a new understanding that I now have to experiment with profiles when printing.
This is contrary to my earlier understanding that Epson and LR do all the experimentation and that by using the Epson printer, paper and matching profiles I can get reliable color matched output from LR. There must be a reason that printer and paper manufacturers go to the trouble of developing profiles. how to choose the appropriate profile when printing? There is the further question of the best output to send to a professional printer. Should I just set to sRGB?
I'd like to use printer color management in LR4. My printer is not in the list. Where do I get ICC profiles for an HP Photosmart 8250 printer and "HP Advanced" paper?
View 20 Replies View RelatedWithin Lightroom 5, I set up a print template for a new Canon ix6550 printer and used it for some months. I happily printed around 40 images.
I sold a few prints, and needed to print identical copies. Up until a few weeks ago, all worked fine.
Then, a few weeks ago, I tried to re-print 2 copies of a single image. The first copy printed OK (it looked like the original), I pressed the 'Print' button once more and the second print came out 'trashed' with extreme increases in saturation and contrast plus a decreased exposure.
I tried altering all sorts of things and printing test strips, but could not get a viable print.
I did not save any changes to the template or to the development settings of the images.
A few days later, I tried again. Without changing anything, the first test strip looked OK, so I went on to successfully print two A4 prints, then the third and all subsequent attempts to print resulted in trashed prints as described above.
Since then, I have determined that if I allow the printer to manage the colours, the test strips look fine. I don't know if I would see a difference on the full sized prints.
So I thought maybe the profile is corrupt? So I downloaded the drivers again from Canon and re-installed - no difference.(Although I do not know enough to locate and delete the originals first.)Should I let the printer manage colours? Will it matter?
How to upload a custom printer profile into Lightroom 3?
View 2 Replies View RelatedUsing Lightrooms printmodule with this printer is a big problem for me. Using Cannon Print studio Works, but then you loose a lot of great functionallity in LR print module.
It seems that when I make a preset or set up printer with correct ICC profile the canon printer driver automatically resets to its own default.
It looks like a print driver in the background resets everything i do. Very confusing and Canon support points to adobe.
My setup:
Macpro with OSX 10.9.2 (latest version)
Lightroom 5.3 (creative cloud member, always latest version)
Canon Pixma pro-100 (bought new april 2014)
I have looked several places on internett and it looks that there are a lot people having similar problems.
softproofing. I apply a color profile appropriate to my printer/ink/paper, and then I can see what colours are in/out of gamut, and won't print as I expect. But, when I click Soft Proofing, the image takes on a less saturated look, however if I select SRGB as a profile it looks normal. That is I believe because sRGB is the profile I have been using anyway. What I don't understand is why the whole image changes. I assume there is more to it than just colours in and out of Gamut.
I do so LR4 asks if I want a proof copy, which is fine and I understand why. When I make a proof copy though, all the adjustments are greyed out so I cannot do anything.
On my MacBook OSX 10. 8.2 I can't print with my Epson printer. Yet I can print with Photoshop CS 5.
View 3 Replies View RelatedMac OSX Snow Leopard 10.6.8 and Epson 3880 Printer version 8.64 incompatability issues -
can't print with printer driver, can't get 'Printer Settings'.
I want to buy and Epson 4000 printer for my art photos - I've always done film but I'm switching to digital finally and got 2-3 years worth of stuff scanned. I want to make nice, high-quality, archival prints. Should I buy the regular 4000 printer or the Pro? There is something about Post RIP devices in the Pro - I don't use InDesign, at least not yet, but I have heard that the colors and color targets are better with the Pro. I am still learning the all about digital stuff so I am a little uncertain but I have been doing photography for a long time and I want to make excellent prints. Is it worth the extra $350 or so?
View 1 Replies View RelatedI get a slight difference in color in my prints my when I use LR prifile vs Canon printer managed. The Canon is much truer to what I see on both monitors which, btw, are calibrated. LR throws in a slight magenta cast. Is there a way to correct this?
View 8 Replies View RelatedWell the printer, 2400 Epson, used to print ok with CS, but I'm clicking print and nothing is happening. I know the printer and cables are ok becuase it's printing fine with Image Print rip.
View 6 Replies View RelatedI have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
View 7 Replies View RelatedUsing my Espon R2000 with Photoshop CS5 and Windows 7 (32 bit), I have to re-select the printer every time I print a copy, resetting the paper type, orientation and printer profile.
Sometimes, mostly when I'm only doing my 2nd or 3rd copy, I can just click on the printer properties to make the selections, but most often when I do that I get the error message "because the printer does not exist". I've installed the most recent updates for Photoshop (ver. 12.0.4).
I just bought a new 4000 printer and the prints come out a little darker and with a little more magenta than what appears on my monitor.
The monitor has been calibrated using the spider software several times and each time it comes out the the same and I think that part of the process is good.
I have set my color workspace in Photoshop to US press defelts (Adobe 1998) and all seems well there.
The images have been scanned to 8000dpi using a High quality scanner from an outside source.
I open the image and convert to working space RGB, and do my correction to the image which includes more color saturation.
I go to print the image using Adobe1998 as source and the printer paper ICC as the output. I go to advanced options and make sure color correction are turned OFF and print.
The images on my printer always come out darker and with more magenta that what I see on the screen no matter what Icc profile I use for every kind of paper.
The softproof does not look that way.
When I print using same as source as the output with color correction sliders set to 0 the print will be much closer but still not quite like whats on the screen.
When I do it the correct way(the first way I discribed) why is my print comming out too dark and too much magenta?
I have asked Epson and gotten no response so I though I would try somewhere else. I have an Epson RX595 printer that can print to DVD's and CD's my question is ...
Is there a way to print a DVD/CD directly from Adobe Photoshop.? Is there a template that I can download and open in photoshop and it will be configures properly to print to this printer?
When I try to print to my Epson PRO 3800, asking Photoshop to handle colors, this printer profiles are not available. I have this printer for years and have always used PS CS3 to print (and handle colors).
Now I have PS CS5 but continue to use 3 for printing to the 3800, because the Epson profiles disappeared from CS5. Now they have disappeared from CS3 too.
Have been working with Epson tech support to get colors to match the CS5 colors to no avail. Have claibrated my monitor usingHuey calibration unit and no matter what I try cannot get the correct colors.
View 7 Replies View Relatedwindows7 Epson 2880 printer I can print in Lightroom with no problem. CS6 was printing okay. Now when I try printing it says proceeding , but nothing happens. Cs6 does not crash. Just won 't print. My printer dialog box says error printing then recover file , but when i try again nothing. everything else seems okay. I restarted CS6 and rebooted computer , still no printing. What am Idoing wrong. Is does CS6 haveto be re instalked ?
View 2 Replies View RelatedA friend who is new to gimp asked if gimp can recognize epson printer color profiles? He told me that when he uses photoshop, it allows him to choose papers and color settings? Can gimp do the same thing?
View 2 Replies View RelatedI can't print to my Epson R3000 printer from the Photoshop Elements 10 I have installed on a Mac OS 1.7.5
View 2 Replies View RelatedI retouch all my images in photoshop from lightroom so they appear next to the raw file in lightroom when I come back. Depending on where the images will be printed they can have a different embedded profiles. without having to include the profile used in the naming of the file my question is:
Is there a way of viewing the file's embedded profile from within lightroom without having to re-open in photoshop to see?
I still use Photoshop CS2 and recently I downloaded the driver for my new Epson NX430 printer. Since then Photoshop won't open. I uninstalled the entire CS2 Suite and reinstalled. Photoshop still won't work though the rest of the programs do. I am using Mac OS X 10.4.11.
View 3 Replies View RelatedWhy can't I get my Epson Printer to print the colors on the monitor> First time this is happening. Printer is new...ink okay...and history with the printer has been okay. Took some photo's yesterday...blue heron, picking up a fish in a pond. Water is blue...heron is grey and white and has other yellowish and maroon coloring as well. The fish he caught was a gold fish. The colors on the monitor are wonderful.
The photo's were cropped severely. But are still clear. Now the water is pink...and the heron is a disgusting color of grey green. Have chosen ICM...chosen Adobe color profile. Used premium glossy white papers, Epson inks.
Tried printing it out without ICM and with different papers....still the same...Either everything is hot pink, or dull gray brown. This was my first ever heron photo that had any merit, and I so want to print it out for everyone to see. I was so lucky to catch the fishing capture. Does the cropping have anything to do with the printing of the photo?
I am trying to print from Photoshop CS6 to an Epson PictureMate color printer and an Epson PictureMate 225 printer. In both cases I want to let Photoshop manage color. I am finding no color profile for Epson in the list of profiles provided by Photoshop. The best I can do is choose “display” as my profile. Still my color prints do not match what I see on my screen in Photoshop. They are flat and washed out. How can I obtain print profiles for my Epson Printers to be used with Photoshop 6?
View 2 Replies View RelatedWill Illustrator CS5 files print on a standard inkjet printer or is some sort of RIP software required? I'm considering an Epson WF-7520.
View 7 Replies View RelatedI want to import a scan from a Epson Workforce 545 printer. Program only shows "Frame from Video" Using a Mac on 10.8.3
View 1 Replies View Relatedlatest updates installed correctly... cs5 and cc6 installed on same machine... now the problem... when sending an image to the printer in cc the program crashes.... but it does not crash when the image is sent using cs5 .
View 2 Replies View Related