Photoshop :: CS2 - Color Differences Between Image When Opened And After Saved
Feb 15, 2012
Using Adobe Photoshop CS2. I'm noticing a color difference between an image I'm working on in PS and the final image - after it has been saved.
Â
For example: working on a image of earth. The image on the web has very deep blues. but when I open it into PS, it looks very purple-ish and when I save it, the color is blue again.
Â
Sometime the difference is slight, and other times it is definitely noticeable. Is there a setting I could adjust? One that would keep the image's true color?
View 4 Replies
ADVERTISEMENT
Jan 21, 2006
I currently use Photoshop CS2, but I also encountered this problem on Photoshop Elements 4.0.
Whenever I am working in Photoshop, my blue looks purple, my red looks orange, but my green seems ok, however when I save it, the colour is different. I know it is not the gamma because that affects everything, not just how Photoshop looks (I'm pretty sure). If someone could help me and tell me how much of a loser I am and give me some simple solution, that would be great because it's a pain not being able to see what it is really going to look like without saving it and looking at that.
Here is what I am talking about, a screenshot and the saved .png: ....
View 2 Replies
View Related
Aug 18, 2008
if there's a way for my PSD file, which I created and saved in Elements, to be opened in CS2?
View 2 Replies
View Related
Dec 31, 2007
i've just been using the brush tool to draw and paint around with, and today when I tried to open up a saved project from last night, It came up all blurry and very undetailed compared to when i saved it. I think it might be the saved file was 16 bit, and maybe it's opening it up in 8 bit which is making it blurry? Or maybe my computer can't handle the 16bit and my resolution on the saved file was too high?
Also, I was wondering some recommended starting specs (like when I open a new window)
View 1 Replies
View Related
Apr 4, 2013
Images opening from LR to PS6 are opened as CR2 files (canon) and then saved in PS - the resulting saved images are PSD files. These files are not added to the LR catalog without re-importing them. This behavior is different than it was in CS5 - in CS5 they are opened as PSD and immediately added to the LR catalog. I want the same bahavior in CS6. In LR I have set preferences to open files as PSD but they are not PSD until they are saved in PS.
View 9 Replies
View Related
Mar 20, 2004
In viewing/creating anything in photoshop 7.0 (and I tried 7.x) the color is different than in any other program... if for instance I take a solid red 255,0,0 and fill a new file - it appears more orange than red. I can take the color picker and it shows the correct RGB say of 255,0,0 but again, it shows orangish on the screen.
ALL other graphics programs, including Imageready DO show the correct color... but NOT Photoshop! - I have tried changing the color preferences up the wah-zoo - nothing. I have tried reinstalling photo 7.0 no avail, I think (or thought) perhaps it was after I downloaded CS to try - to see if I would upgrade ????
this could be far off the mark, but at this point my graphics development work is hurting because I if I develop/create anything in photoshop I have to have another graphics program also open just to see what the true color looks like.... PLEASE help. I really don't know what else to do besides finding and deleting ANYTHING related to photoshop/upgrades etc and reinstalling again.
View 1 Replies
View Related
Jun 4, 2013
I have a client who insists on receiving final files as PDFs saved as Illustrator Default with Preserve Illustrator Editing Capabilities ticked. This wasn't an issue until I upgraded to cs6. In cs6 I'm saving the native file as cs5, and then saving as PDF with the following options:
Â
The client is able to open the PDF in cs5 but the layers are all flattened into a single layer. Is there way to Preserve Illustrator Editing Capabilities for any version other than cs6?
View 1 Replies
View Related
Aug 8, 2013
I have spent the entire day trying to solve this and I finally found a fix but not the cause. I have tried all the typical ways to sync/read/render to see the xmp data in LR.
Â
After all of this I found the only way for me to see the xmp data is to open the xmp as a text document then save it go into lightroom read metadata and it shows up. This obviously isnt a workable solution for thousands of files so I need to find a cause.
Â
So a little info. I'm using LR5 on a windows. I edit clients images then send them the xmp files with those edits. I have one client thats photos when imported do not show metadata or develop adjustments. This is the only solution I have found to see the info. I believe they are using LR 4 and a MAC.
Â
Is it possible that the problem is the original files are saved on a mac then transfered to my windows machine.
View 9 Replies
View Related
Nov 15, 2013
The EIZO CG223G monitor color intensity using PSE 11 Organizer differs significantly from using Fotoeditor for the same tiff and jpg files.
How to make the color rendering the same?
View 2 Replies
View Related
Jan 21, 2013
why few of the drawings  processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different  Autocad version such as 2012
View 6 Replies
View Related
Dec 11, 2012
I have saw some differences(rotation) while opening the same image in the photoshop and imaging preview applications. why this difference occurs. I have attached the screen shot for your references.
View 10 Replies
View Related
Aug 22, 2012
How can I make sure my photos are the same from my Mac to a pc.? I just opened up my disc to view my clients photos on a pc and the color is way off. I edited them using Lightroom on my Mac.
View 2 Replies
View Related
Feb 6, 2012
I just spent 30+ hours editing a set of 123 wedding photos in RAW file format. When I export to JPEG, the colors change on just about every photo. I understand that if I would have correctly set up the camer calibration prior to editing, this would have possibly solved my problem. However, the photos are already edited. When I export the files in TIFF, they look fine. It's just the JPEG file format that changes the look of my images. I'm using Lightroom 2.3. My last brainstorm involved importing the already edited TIFF files and then trying to export those into JPEG, the color format was still off.
View 1 Replies
View Related
Sep 27, 2013
I have the same x5 loaded on 2 different systems. The problem I ran into is the visual difference of the color palettes. One is very much brighter to the eye than the other system. I am using the same rgb color palette or spot color palette on each system. The same shared file is not even close to the same color shade on the two systems. Also, I have eliminated the possibility of a monitor situation. I have used the same monitor on both systems with the same result.
View 4 Replies
View Related
Jan 14, 2013
OK, I'm creating a tradeshow graphic for a client. I designed the whole thing in Illlustrator CS6. But for the proof, I used a low res image of the sky (before we purchased it). Everyone was happy. It was a low-res RGB image imported into Illustrator, then the whole thing was exported as a pdf.
Â
Once they approved it, I purchased the high res image. RGB. Same image... just high res. I popped it into the Illustrator file and exported it in exactly the same way. But now, the image looks much more purple. The low res pdf showed it as much brighter, lighter blue.
Â
My client prefers the lighter blue. When I look at the two images in Photoshop, they look the same (in terms of color). should I be worred? Why is there such a color difference?
View 4 Replies
View Related
May 2, 2012
I have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
View 3 Replies
View Related
Dec 11, 2007
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies
View Related
May 2, 2013
My Nikon D3 is set to save each image as nef and jpg (fine, large). Why is the jpg image opened in camera raw different from the same image in nef?Â
Â
CS5 with Windows Vista.Â
View 8 Replies
View Related
Nov 20, 2013
My images are going gray when I open them.
View 1 Replies
View Related
Sep 27, 2013
What happens to a camera raw image when it is opened in Photoshop? I have PS12 and receive raw images from our photographer and I'd like to know what type of manipulation, if any, occurs to an image as it is being read into Photoshop.
View 4 Replies
View Related
Sep 12, 2012
If I have opened a RAW image in PS5.5 and it has several layers already modifying the file, can I convert the bottom layer to a smart object and then use ACR tools like de-fringing, etc.? I notice flaws in the image that would be corrected that way, and I don't want to start from scratch. I am able to make the layer a smart object. I don't know how to invoke the ACR tools.
Â
This image arrived from Lightroom with "no Lightroom effects" chosen at transfer, if that makes any difference.
View 9 Replies
View Related
Jun 18, 2012
On OSX Lion. Just installed the Creative Suite (paid subscription).
Â
I can launch Photoshop just fine, but when I open any image it locks indefinitely once I go to edit it. I've left it sitting for hours with no luck.
Â
What's happening?
View 13 Replies
View Related
May 30, 2008
how to save an image in photoshop so I can open it in Illustrator? I want to the image to open with it's outline to be the image, and not the bounding box. I know it has to do with making a selection around the image in Photoshop, and making that selection into a path, but then I'm lost..
View 7 Replies
View Related
Jun 20, 2013
I have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies
View Related
Mar 15, 2012
Photoshop gets really slow when any image, regardless of size is open. When there are no images open it runs smoothly. The interface gets really laggy, filter usage, tool selection or any other usage is really sluggish, but only with an image open, even if it's a single pixel.
Â
I've tried different performance settings - changing where the scatch drive is, how much memory to allocate, what the cache levels are set at, enabling/disabling openGL, etc. It makes no difference if it's after a fresh reboot or if it's been on for days. No software has changed since the upgrade. Memory test don't show any issues and no other application has this problem - Illustrator, After Effects, Maya, Mudbox, etc. are all fine.
Â
My system specs
Â
Windows 7 x64 Enterprise - Service pack 1 installed
Dual Xeon quadcore E5620 @ 2.4GHx (sixteen threads w/hyperthreading)
96 GB Ram - DDR3 - 1333 MHz / PC3-10600 - registered - ECC
Nvidia Quadro FX 3800 - with latest stable performance drivers v 295.73 (tried changing these, no affect)
Western Digital VelociRaptor 150GB 10000 RPM 16MB Cache SATA 3.0Gb/s OS Drive
X3Â Seagate Constellation 2TB 7200 RPM SAS 6Gb/s setup in a RAID 5 config
Â
I'd think it would be a memory issue if all apps had similar problems, or if PS had issues when just being open. It's odd that it happens only when an image is open.
View 2 Replies
View Related
Mar 21, 2013
I recently upgraded to a new computer and I am experiencing strange black bands blotches when opening many of my old Photoshop files or even when opening common files types (jpg/png). The problem doesn't occur with all file, some open just fine. The distortion only appears within Photoshop,
when I try to save the file for display everything looks fine as long as I don’t open the saved file in Photoshop. I feel like I’m missing something basic but I’ve used PS for years and never encountered this. All of my profile settings are exactly the same as they were on the old computer (basically default) so I don’t think there is a mismatch.Â
View 2 Replies
View Related
Jun 26, 2013
I cannot see my image after opening in PS6. The tab shows the file name and I can see the image in the tile when I go to "File-Open".Â
View 1 Replies
View Related
Jul 7, 2008
I don't know how to explain it properly, but recently if I download a picture and open it in Photoshop is appears rough and edgy. For example, I just recently downloaded this.
However, when I attempt to open it using Photoshop is appears like this. (I couldn't open the screenie in Photoshop as the quality was reduced even further)
I just started using Photoshop recently, but when I first started using Photoshop it didn't do this. It happens, I now know, with any image. Even those that were never downloaded such as the screenie I provided have a drastic decrease.
View 2 Replies
View Related
Oct 14, 2008
CS3, Vista OS, Nikon NEF file After making image adjustment in Camera Raw the image is very dark when opened in CS3. Can correct by adjusting gamma in exposure or blending a new duplicate layer using screen.
Is there any way to avoid the extra steps or am I doing something wrong?
View 3 Replies
View Related
Aug 15, 2009
I have installed Photoshop CS4 x64 on Windows 7 x64 (RC) and when I open an image (any image file), it is not displayed in Photoshop. This is on a fresh install on a new PC. I see the tab (and the window) that photoshop displays for an image, but there is no image data in it. The only way I can see the image is if I drag the tab (converting it into a window), once I drop the window, the image data is again not visible. I am getting the same issue with Photoshop CS4 (x86). Has anyone else seen this before? I have updated my video card drivers, and I installed the drivers for my monitors (even though I don't believe in monitor drivers!).
View 8 Replies
View Related
Sep 12, 2011
I'm being really thick here and don't actually know the correct term for it, but I've lost the black line that used to be around the outside of opened images in Photoshop (CS5 to be exact)
View 8 Replies
View Related
