I have saw some differences(rotation) while opening the same image in the photoshop and imaging preview applications. why this difference occurs. I have attached the screen shot for your references.
View 10 Replies
Whenever I try to use the Crop Tool, it only stretches out to a small portion of the image and refuses to stretch down any farther.
View 2 Replies View RelatedUsing Adobe Photoshop CS2. I'm noticing a color difference between an image I'm working on in PS and the final image - after it has been saved.
For example: working on a image of earth. The image on the web has very deep blues. but when I open it into PS, it looks very purple-ish and when I save it, the color is blue again.
Sometime the difference is slight, and other times it is definitely noticeable. Is there a setting I could adjust? One that would keep the image's true color?
typically the lag occurs on just the standard brush above 100px. smaller brush sizes do not seem to be as affected. i've gone through all the downloads for photoshop and everything appears up-to-date. I've got 4Gb of memory.
I've got a ATI Radeon HD 4670 video card. I've checked off "basic" under the performance with no luck. Is it my video card?
Working on a photoshop image. Horizontal and vertical banding occurs in thin lines of solid colors randomly within the image.
They can be repainted out, but with any zoom or tool action more seem to appear.
They exist even after saving and restarting.
Windows XP 64 bit $GB Ram
Out of 100s of thousands of RAWs, this is the first I've seen them.
..in G mode:
..In edit mode:
I tried opening in Photoshop and a different error occurs. I avoid PS as much as humanly possible and have not used it since acquiring the D4. BUT as I recall it shares this module with Lightroom so this message is unexpected as LR has no problem with all the other D4 images.
..In CS5:
Two main questions:
1. What do the two LR messages usually mean?
2. Does the CS5 message look like a separate problem . If so why does the camera raw module work in LR?
When I use tilt shift filter red and green ghosting occurs. In fact all of the new blur filters exhibit this behaviour. How do I fix it?
View 6 Replies View RelatedI have noticed on my drawings that have a hatch transparency (does not matter the percentage), that in CAD everything is fine, but as soon as I plot to pdf, the pdf image will have a lot of streaking in the transparency(there is no streaking in the preview window).
No matter the transparency or colour, the streaking remains very obvious. Some functionality I am missing?
I have illustrator cs5 and I am trying to send a file to someone who has cs3, I saved it in a cs3 format but when they try to open it an error occurs saying, "could not find The linked file, choose repair to locate the missing file, replace to open another file, or ignore to leave file unchanged".
View 2 Replies View RelatedWhen trying to open, then immediately the error occurs.
View 1 Replies View RelatedI am making an image smaller (from 1200 pixels wide to 700), and no matter what I try it always turns out pixelated. I hate it! I just want the size of the image to get smaller without compromising the quality of said image. Here's what I've tried:
- Saving to different formats before resizing (TIF, PNG, etc)
- Changing the X and Y resolution from 150, to 300, even 900 before resizing. It seems to have no effect.
- Changing the interpolation from cubic to the others (the others ones all look worse)
I am at a loss! I am using "image/scale image" to resize, by the way. And the original image was a 1200-wide TIF. I don't see why I'm not able to increase the number of pixels while making the image smaller to maintain the integrity of the original image.
I rendered a file from render queue choosing outpuit module h.264
It all seem to work fine but when i try to play the rendered file error occurs - depending on video player - some player wont play the file one is showing time of video 00:00 but plays it in media player (windows) it is showing 23:40:00 although file is 3:11... simply rendered file is not working -
i am working on dynamic link seq from premiere pro...
soft: AE CS5
How to automatically renumber the sheets if re-sorting occurs?
I’m not sure if there is a way to automatically renumber the sheets in sequential order in case of re-sorting the sheets. This might occur very often during the work!
For example, in the screenshot below, I wanted to re-numbering the sheets AUTOMATICALLY such that the numbers of the sheets starts from 1 to 6.
Then how to automatically re-number the sheets in sequential order automatically?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Actually I am not a Autocad Lisp person but I need to refer Autocad drawing for my workflow.
Is there a way in Lisp to find a certain, text or attribute in all files in a folder and if the file
contains that text to get the filename written to a txt file.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
In viewing/creating anything in photoshop 7.0 (and I tried 7.x) the color is different than in any other program... if for instance I take a solid red 255,0,0 and fill a new file - it appears more orange than red. I can take the color picker and it shows the correct RGB say of 255,0,0 but again, it shows orangish on the screen.
ALL other graphics programs, including Imageready DO show the correct color... but NOT Photoshop! - I have tried changing the color preferences up the wah-zoo - nothing. I have tried reinstalling photo 7.0 no avail, I think (or thought) perhaps it was after I downloaded CS to try - to see if I would upgrade ????
this could be far off the mark, but at this point my graphics development work is hurting because I if I develop/create anything in photoshop I have to have another graphics program also open just to see what the true color looks like.... PLEASE help. I really don't know what else to do besides finding and deleting ANYTHING related to photoshop/upgrades etc and reinstalling again.
Why is it that when i choose a Pantone colour from my Pantone book, then go into Photoshop and select the same Pantone colour number, the CMYK breakdown in my book is different to the one that Photoshop tells me?
View 4 Replies View RelatedTwo questions ...
1. I'm getting the following warning ...
I think that a TIFF file bigger than 2 gb does not create any quality issue in LR - PS workflow ... correct?
It is just related with some third party programs, as the warning box says.
2. This file .. an uncompressed TIFF file ... it is 1 gb inside the PS and it is 2.21 gb in the system folder. Where is this difference coming from?
differences in the Camera Lens Profiles in ACR and the Lens Correction Filter in Photoshop CS6.Reason I ask is my D800 and Nikon 14-24mm lens is detected and correction applied in ACR, but the same camera and lens combination is not recognized in the Photoshop lens correction filter. The D800 is nowhere to be found. But interestingly the profiles for the D4 are
Many folks have asked in the past when the D800 and Canon 5DM3 would be supported but all the attention has been focussed on ACR, so when will these profiles be available for Photoshop Lens Correction?
I am a Mac user and have been disappointed at some of the limitations of elements 11 on my Mac versus what I understand you can do on a pc. Have these issues been corrected for Mac users in elements 12?
View 7 Replies View RelatedI make layer mask which is a bit fuzzy, so it merges picture from both layers in some parts. Then I want to save it in order to use it later somewhere, so I convert the mask into a selection. But the selection does not hold the fuzziness of original mask, so when I use it as a mask somewhere else, it varies from original.
I attached the psd file with example what I mean, I have saved mask of the Layer 1 as selection, loaded into Layer 2, created mask, but it is not the same, when I switch on and off visibility of the Layer 2 the picture changes.
Is there a way to make the selection to hold all the information about the mask including fuzziness exactly ?
What are the differences, preferences, etc. of saving files (jpgs) with these various methods? The baseline "standard" gives the largest file. Is this preferred?
View 2 Replies View RelatedWhy is the pixel ratio of a project in illustrator different than that of the same pixel ratio of a project in Photoshop? Example: A project can in Illustrator can have an artboard of 950px X 950px and be 12in and in Photoshop that same pixel ratio will be 4 3/4in.
View 3 Replies View RelatedThe EIZO CG223G monitor color intensity using PSE 11 Organizer differs significantly from using Fotoeditor for the same tiff and jpg files.
How to make the color rendering the same?
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
What are the prime differences between XDP X and XWDP MX?? And do I need both programs?? I am a graphic designer, I do print and web design.
View 3 Replies View RelatedI produce documents in AI, and save them to pdf. Then, in order to reduce the file size, I load then into PS, flatten image, then resave as pdf. All are in CMYK.
There appears to be a big difference in the output pdfs from AI and PS. In the PS ones, blacks are very grey, and drop shadow effects become exaggerated. I've attached some screen shots. I hope you can see the differences. The AI ones are on the left. It is quite hard to see the differences here, but across a whole document it is very obvious.
What can I do to stop the PS pdfs turning out this way?
I have a doubt on colors and monitor profile. I am using an imac with monitor calibrated with Spyder pro3 and shoot photos with a Canon 500D (RAW+JPG).
I recently added a cir polarized filter to my camera, and really satisfied of colors I see in the camera screen, and the same colors I see on my imac when I look at jpg files. Unfortunately when I open photos on Lightroom 4.1, colors seems the same while loading the picture (probably reading the jpg) but than suddenly changes when rendering the preview and in develop module. Colors seems less vivid like missing some contrast (in attachment an example of the same file opened with lightroom and apple preview in raw and jpg).
I know that jpg created by camera are different from raw files, but actually never had such a difference in colors with all other photos I shoot before. Is this because of the filter or do I have to set anything in particular in lightroom, such as monitor profile or others?
How can I make sure my photos are the same from my Mac to a pc.? I just opened up my disc to view my clients photos on a pc and the color is way off. I edited them using Lightroom on my Mac.
View 2 Replies View Relatedwhat are the differences among the surface types we can create?
I see we can use convert to surface command and have a surface made from the object which receives NURBS property. And I see we can command a planar surface, realizing it can't have a NURBS Surface for further changes.
when we thicken the planar surface, the surface goes off then, and it can be no longer selected ! what's going on with this planar surface, what is it for? why does autocad actually got a Planar surface?
I would like to have a function so I can -at least- select the differences that sets picture a apart from picture b.
Is there a plugin for that or is it even build in p.n?
I work on a Mac and I just updated from Illustrator CS5 to Illustrator CS6 and I'm noticing a weird problem. I have a file that I created in CS5 that when I copy the artwork to a new file in CS6, the colours are totally different.
I have checked my preferences against those of a co-worker that still has CS5, and as far as I can tell, everything is the same!
I've attached a set of screenshots (below), using a file created in CS5 (bottom image), and what it looks like when it is copied into a new file (top image).
