Two questions ...
1. I'm getting the following warning ...
I think that a TIFF file bigger than 2 gb does not create any quality issue in LR - PS workflow ... correct?
It is just related with some third party programs, as the warning box says.
2. This file .. an uncompressed TIFF file ... it is 1 gb inside the PS and it is 2.21 gb in the system folder. Where is this difference coming from?
Why is the pixel ratio of a project in illustrator different than that of the same pixel ratio of a project in Photoshop? Example: A project can in Illustrator can have an artboard of 950px X 950px and be 12in and in Photoshop that same pixel ratio will be 4 3/4in.
View 3 Replies View RelatedMy office is running into a printing issue, when different people are plotting off the same drawing file.
I've checked the .CTB file, all of us are using the same file, all .CTB parameters are identical, and no line weights have been set up within the layers, all are set to default, and no transparency has been used.
One man prints the file from AutoCAD2013, on a Windows 7-32bit computer, to our HP Laser Jet 8150N and his drawing comes out light.
I print the same drawing file from AutoCAD2012, on a Windows 7-32bit computer to the same printer with the same .CTB file and my drawing file prints dark. Much darker than his does.
We're having the same issue with other computers here in the office all printing to the same printer using exactly the same .CTB file. I've checked all the versions of Windows, and we're all using Windows 7 32-bit.
The only thing I can think of is that maybe we have different graphics cards as the computers have been purchased at different times.
I currently use Photoshop CS2, but I also encountered this problem on Photoshop Elements 4.0.
Whenever I am working in Photoshop, my blue looks purple, my red looks orange, but my green seems ok, however when I save it, the colour is different. I know it is not the gamma because that affects everything, not just how Photoshop looks (I'm pretty sure). If someone could help me and tell me how much of a loser I am and give me some simple solution, that would be great because it's a pain not being able to see what it is really going to look like without saving it and looking at that.
Here is what I am talking about, a screenshot and the saved .png: ....
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies View RelatedWhy is the image on the screen small the the actual file size. As an example I have an image thats 5.7x5.7 @72DPI. My canvas says 100% but the image on screen is about 3x3.
View 3 Replies View RelatedCan someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
 When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
In viewing/creating anything in photoshop 7.0 (and I tried 7.x) the color is different than in any other program... if for instance I take a solid red 255,0,0 and fill a new file - it appears more orange than red. I can take the color picker and it shows the correct RGB say of 255,0,0 but again, it shows orangish on the screen.
ALL other graphics programs, including Imageready DO show the correct color... but NOT Photoshop! - I have tried changing the color preferences up the wah-zoo - nothing. I have tried reinstalling photo 7.0 no avail, I think (or thought) perhaps it was after I downloaded CS to try - to see if I would upgrade ????
this could be far off the mark, but at this point my graphics development work is hurting because I if I develop/create anything in photoshop I have to have another graphics program also open just to see what the true color looks like.... PLEASE help. I really don't know what else to do besides finding and deleting ANYTHING related to photoshop/upgrades etc and reinstalling again.
Why is it that when i choose a Pantone colour from my Pantone book, then go into Photoshop and select the same Pantone colour number, the CMYK breakdown in my book is different to the one that Photoshop tells me?
View 4 Replies View RelatedI have saw some differences(rotation) while opening the same image in the photoshop and imaging preview applications. why this difference occurs. I have attached the screen shot for your references.
View 10 Replies View RelatedUsing ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
My picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies View Relateddifferences in the Camera Lens Profiles in ACR and the Lens Correction Filter in Photoshop CS6.Reason I ask is my D800 and Nikon 14-24mm lens is detected and correction applied in ACR, but the same camera and lens combination is not recognized in the Photoshop lens correction filter. The D800 is nowhere to be found. But interestingly the profiles for the D4 are
Many folks have asked in the past when the D800 and Canon 5DM3 would be supported but all the attention has been focussed on ACR, so when will these profiles be available for Photoshop Lens Correction?
I am a Mac user and have been disappointed at some of the limitations of elements 11 on my Mac versus what I understand you can do on a pc. Have these issues been corrected for Mac users in elements 12?
View 7 Replies View RelatedBackground info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
I make layer mask which is a bit fuzzy, so it merges picture from both layers in some parts. Then I want to save it in order to use it later somewhere, so I convert the mask into a selection. But the selection does not hold the fuzziness of original mask, so when I use it as a mask somewhere else, it varies from original.
I attached the psd file with example what I mean, I have saved mask of the Layer 1 as selection, loaded into Layer 2, created mask, but it is not the same, when I switch on and off visibility of the Layer 2 the picture changes.
Is there a way to make the selection to hold all the information about the mask including fuzziness exactly ?
Using Adobe Photoshop CS2. I'm noticing a color difference between an image I'm working on in PS and the final image - after it has been saved.
For example: working on a image of earth. The image on the web has very deep blues. but when I open it into PS, it looks very purple-ish and when I save it, the color is blue again.
Sometime the difference is slight, and other times it is definitely noticeable. Is there a setting I could adjust? One that would keep the image's true color?
How can in retain my original jpg file sizes when processing multiple file in 11 using expert mode.
View 9 Replies View RelatedWhat are the differences, preferences, etc. of saving files (jpgs) with these various methods? The baseline "standard" gives the largest file. Is this preferred?
View 2 Replies View RelatedThe EIZO CG223G monitor color intensity using PSE 11 Organizer differs significantly from using Fotoeditor for the same tiff and jpg files.
How to make the color rendering the same?
I normally upgrade every other version. I currently use X2 on a Windows XP computer. My primary uses are photo editing. My key interests are:
- processing 16 bit per color files
- use of layers and blends
- stereo photography (combining and aligning stereo pairs)
- use of various tools such as cloning and healing.
- Color management and Printing
Reviewing the product page, I haven't really found anything that shows a list of upgraded or added features. Most of the things mentioned appear to be in X2 already. Looking at the thread calling for future features, it appears that the things missing are still missing. X2 is serving me well, but there has to be some reason to upgrade?
What are the prime differences between XDP X and XWDP MX?? And do I need both programs?? I am a graphic designer, I do print and web design.
View 3 Replies View RelatedI produce documents in AI, and save them to pdf. Then, in order to reduce the file size, I load then into PS, flatten image, then resave as pdf. All are in CMYK.
There appears to be a big difference in the output pdfs from AI and PS. In the PS ones, blacks are very grey, and drop shadow effects become exaggerated. I've attached some screen shots. I hope you can see the differences. The AI ones are on the left. It is quite hard to see the differences here, but across a whole document it is very obvious.
What can I do to stop the PS pdfs turning out this way?
I have a doubt on colors and monitor profile. I am using an imac with monitor calibrated with Spyder pro3 and shoot photos with a Canon 500D (RAW+JPG).
I recently added a cir polarized filter to my camera, and really satisfied of colors I see in the camera screen, and the same colors I see on my imac when I look at jpg files. Unfortunately when I open photos on Lightroom 4.1, colors seems the same while loading the picture (probably reading the jpg) but than suddenly changes when rendering the preview and in develop module. Colors seems less vivid like missing some contrast (in attachment an example of the same file opened with lightroom and apple preview in raw and jpg).
I know that jpg created by camera are different from raw files, but actually never had such a difference in colors with all other photos I shoot before. Is this because of the filter or do I have to set anything in particular in lightroom, such as monitor profile or others?
How can I make sure my photos are the same from my Mac to a pc.? I just opened up my disc to view my clients photos on a pc and the color is way off. I edited them using Lightroom on my Mac.
View 2 Replies View Relatedwhat are the differences among the surface types we can create?
I see we can use convert to surface command and have a surface made from the object which receives NURBS property. And I see we can command a planar surface, realizing it can't have a NURBS Surface for further changes.
when we thicken the planar surface, the surface goes off then, and it can be no longer selected ! what's going on with this planar surface, what is it for? why does autocad actually got a Planar surface?
I would like to have a function so I can -at least- select the differences that sets picture a apart from picture b.
Is there a plugin for that or is it even build in p.n?
I work on a Mac and I just updated from Illustrator CS5 to Illustrator CS6 and I'm noticing a weird problem. I have a file that I created in CS5 that when I copy the artwork to a new file in CS6, the colours are totally different.
I have checked my preferences against those of a co-worker that still has CS5, and as far as I can tell, everything is the same!
I've attached a set of screenshots (below), using a file created in CS5 (bottom image), and what it looks like when it is copied into a new file (top image).
Is there a way to automate repetitive actions such as file size and file saving to the same folder?
View 4 Replies View Relatedam having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies View Related