My camera out put is in JPEG I have no choice. While I can process jpeg with no problems in CS5 is there a better way to do this? would I be better off converting the JPEG to either tiff or psd and then process the file and then reconvert back to jpeg as the final product. I have heard so much about "lossy"(jpeg) vs "non Lossy" (tiff and psd) which are the ones I want to use?
View 5 Replies
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
Working in BRidge and Photoshop CS6:I have 160 color adjusted hi-res CR2 RAW files from my photographer, thought I was getting tifs. I need tifs for my INdesign file. I tried using the photoshop image proecessor through brige by selecting all my images and then saving as TIFFs but I am losing all my color correcting? Is there a way to save these out as tiffs as a group and not one at a time? I also might have lost my color correcting when I copies them all to one folder as well...not sure what is happening except now my great product shots look like crap.
View 8 Replies View RelatedI am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
Question: How do I “Add” multiple TIFF files to a Batch Process so I don't get the "what page" question?The PP9 Batch Process Added – OPENED - files, processed according to my script, then saved the result to new type & folder.
X5, a recent purchase, does an IMPORT of TIFFs instead of an OPEN and wants to know what page I want to load. Answering this on each file defeats the purpose of batch processing. How I should write the script?
I am trying to continue an assignment that I started at school today, but the Photoshop CS6 (64 bit) that I have on my laptop will not let me open any files. Not, JPEG, TIFF, PSD, PNG, nary a one of the photo types can be opened. It doesn't give me any signs of trouble or error messages. It just wont let me open a file or make a new file. I just sits there in all its power staring me down. why must Photoshop all of a sudden despise me so?
View 4 Replies View RelatedHow do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder
View 4 Replies View RelatedI have about 50 tiffs in a folder. can i duplicate each and then turn the dupes into jpegs all with one action?
View 9 Replies View RelatedI scanned, as a tiff file, a full-center spread of a large newspaper. This had to be scanned in eight sections, the pages were so big on my A4 scanner window. When I joined all the sections up in Photoshop CS5, the size of the file was huge (about 21 inches by about 19 inches) It is also digitally large (about 320 MB, since the resolution is 300 dpi).
Because I want to keep the composite photo but don't want the file to be so digitally large, yet need the good resolution, I thought it would be a good to save it as a JPEG file, which would give me the dimensions I need but not be so digitally bulky as the original. On pressing the drop-down menu for Saving As, the JPEG option did not appear in the dialogue box. Why is this, and how may I save the file in JPEG format?
I'm taking the time to edit some of my nicer/older outdoor photos that were taken in jpeg format in Photoshop CS3 and then on to printing with an Epson 3800. I've been told that files I want to print I should make sure that I'm set to an RGB color space (1998), get icc profiles for paper, have photoshop manage colors, etc.
This is all going great! However, I've recently read online that to truly show the full potential of one's photos, those jpeg's should be converted to a TIFF file format...especially when printing (I'm now taking everything in RAW format, but I still have to take care of some of these nicer jpeg's).
Have done several prints comparing same photo in jpeg & tiff and tiff definately is higher quality. Now..my questions concern some of the settings in CS3 when I chose 'Save As' - 'Format' = tiff. Code:
Photoshop CC is not among the programs listed and Windows won't let me add it to the list. Oddly, Illustrator CC is listed. How do I rectify this? I have Photoshop CS6 installed and that is listed. I'm running Windows 7 Ultimate.
View 9 Replies View RelatedI am trying to batch convert several thousand TIFF files to lossless JPEG-2000, but I can't get it to work.
When I open a single file and "Save as" JPEG-2000 with the lossless option checked, the result is truly lossless. But when I record this as an Action and then Automate/Batch this action, the output is not saved as lossless.
In CS6 I work with .tiff files and then export them to LR4 for editting. When I try to export the files back to CS6 they are converted to .jpeg files. Why?
View 4 Replies View RelatedI run Lightroom 4.4 under Apple OS X10.4.4..When I export files Exif Tool (in Graphic Converter) under ICC header shows for Jpeg "Primary Platform = Microsoft and for = Tiff Apple; and under ICC Profile Color profile for Jpeg = HP but Adobe 1998 for Tiff. I can see that there is a difference between the profile for Jpeg and Tiff (eg sRgb and Adobe1998) but don't follow why the Primary platform differs and shows Microsoft for Jpeg and that the jpeg profile is HP
View 2 Replies View RelatedI got this workflow,
1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
How the PMS color palettes "simulate" on screen how the color will print on different substrates (glossy vs matte vs uncoated paper). That's great for comps, but if you convert it to CMYK to print it, and the values are representing a "simulated" color it won't look correct (by that I mean come close to matching the spot color). For example, the uncoated palette simulates the color by making them appear a bit washed out on screen - pretty good visual simulation. But it might do so by adding black and cyan to orange for example, etc. - effectively dulling the original color.
So if I convert that to CMYK within the new Pantone + color palette, and then send it to the printer - it won't appear as it did on screen, it will dull the end color even more because it's converted the color to the dull simulated version - what a disaster! It's only doing half the job - showing us what it should look like on screen. In order to be truly efficient for design professionals the CMYK conversion might remove black and cyan completely to effectively brighten the color in the final output on uncoated paper. I would prefer it just stick to the standard conversion, which Pantone did have as a standard palette option (PMS to process), and then I can adjust if I think it's necessary.
Any corporate branding system will likely start with a PMS spot color palette for the identity. Then it will build into many different adaptations - full color brochures, large format banners and trade show graphics, website, advertising. So any corporate branding system will need to have PMS, CMYK and RGB versions of their main corporate color palette. There was a standard for these translations that was automatically consistent in the Adobe software and that is now all over the place, so it relies on individuals manually adapting the color mixes for final use - what a great way to screw things up.
Is there way to get around the process of...
I setup to batch some images with a Action i created.
I chose Save and Close, but each time it goes to save the JPG window pops up to ask me what quality, etc..
I want them to just save as JPG quality 10.
I don't want to have to hit enter after every image is processed.
Is there a way to do batch process of converting .jpg or .tif images from RGB to CMYK?
View 2 Replies View RelatedI am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
I have cs5 and I have a whole bunch of old tiff's and I want to convert them all to jpeg's...is there a way I can do a mass conversion from one to the other. Also I want to change pix size and resolution. If so how do I do it?? I know it can be done on Elements, if I can do it on that then there must be a way to do it on cs5.
View 8 Replies View RelatedI have had no trouble in the past using automate/batch to change images from jpeg to tiff and back again. For some reason this last set of images will not transfer. Everything I have done to the images has taken twice as long as usual, even simple things like just getting the image to show up (they are all tiffs now). When I finally got everything fixed up I went to change the folders from tiffs to jpegs.
 What happened is that the first image would change over then each successive one would overlay the one before it. So I could have ended with a "deck of cards" on the screen but nothing in the new folder I had created. I need to get these to a pr person asap but can't send a ton of CDs that the tiffs would take up.
When I save as jepg it saves as Tiff
View 2 Replies View RelatedI want to convert a large tiff(490MB) into a JPEG in Photoshop with CS5. The "save as" options don't show JPEG as an option. The image is in 8 bit mode already, and I've tried cmyk and rgb mode. "Save for web and devices" is also not an option. The image is one layer.
View 2 Replies View RelatedWhen I select jpeg in the Save As dialogue box the extension .iff appears instead.
View 4 Replies View RelatedI'm using Photoshop CS 5.1 on an iMac, running OS 10.8.2. I've encountered an odd behavior. Photoshop is open. I try to open a tif or jpeg in Photoshop by control-clicking the icon, or double-clicking in Bridge. Instead of simply opening the doc, Photoshop launches again - so now there are two Photoshop icons open in my dock. (And if I check behavior in Activity Monitor, indeed there are two Photoshop 5.1's running.) I get a message.
"The application has been moved, and its path has changed. To update the product configuration, click Update."
Click Update. Enter admin password. But then the problem simply recurs. The update isn't sticking.
The problem doesn't occur if I try to open a Photoshop doc by clicking it (just .tif and .jpg).
When I look in 'recent items - applications' in the finder I see two Photoshop 5.1's. But there is only one Photoshop 5.1 in my Application folder.
When I have two Photoshops open (as it were) neither one 'knows' about the windows open in the other. That is, if I have picture.psd open in one and picture2.psd open in the other, I don't see picture2.psd as an option in the bottom of the Window menu, if I'm viewing picture.psd.
But when I quit and just re-launch Photoshop from the dock, it remembers the docs from both launches via 'open recent'.
Most peculiar.
This really isn't inordinately impacting my workflow but it's odd, and I think it's slowing the system. (I'm thinking of updating to CS 6. Maybe it will just go away!)
Recently I have been unable to save tiff and psd files as jpegs. When I select "save as" from the file menue I do not have jpeg as an option in the drop down menue. I have always been able to save files as jpegs until recently.
View 4 Replies View RelatedHow do I changs JPEG to TIFF?
View 1 Replies View RelatedAn associate is trying to open a 60,000 x 60,000 tiff file using PS CS5.1-Extended on a windows 7 platform with 6G RAM.
He gets the error message "Photoshop can only decode JPEG encoded images up to 32767 pixels wide of tall."
I suggested that he might have a jpeg whose extension got changed to tiff. He says no, it's a tiff, and besides how would one generate a jpeg that size.
How do I convert a Nikon NEF file to a TIFF or JPEG?
View 1 Replies View RelatedRecently one of my photographer friend shared a scanned photograph, which was processed in photoshop and Duotone color mode was applied. So it's a PSD with Duotone color mode. Now when we go to Save as option, there is no option for saving it as TIFF or JPEG.
View 6 Replies View RelatedI was trying to open an image that had already been processed by me in CS6 on this laptop.
When i select the image that i want to open CS6 launches but then i recieve an error message saying that CS6 is unable to open the image. Frustatlingly this does not happen with every image.
One person has said to reinstall the software but i downloaded it from the Adobe site and don't wnt to end up paying twice.
System info
Processor Intel(R)Core(TM)i3-2350M @2.30Hz 2.30GHz
Installed memory Ram 8.00 (7.89 usable)
System type 64 bit
Plug ins
Alien Skin - Exposure 4
Anthropics -Portrait Proffesional
