I want to convert a large tiff(490MB) into a JPEG in Photoshop with CS5. The "save as" options don't show JPEG as an option. The image is in 8 bit mode already, and I've tried cmyk and rgb mode. "Save for web and devices" is also not an option. The image is one layer.
View 2 RepliesAn associate is trying to open a 60,000 x 60,000 tiff file using PS CS5.1-Extended on a windows 7 platform with 6G RAM.
He gets the error message "Photoshop can only decode JPEG encoded images up to 32767 pixels wide of tall."
I suggested that he might have a jpeg whose extension got changed to tiff. He says no, it's a tiff, and besides how would one generate a jpeg that size.
I scanned, as a tiff file, a full-center spread of a large newspaper. This had to be scanned in eight sections, the pages were so big on my A4 scanner window. When I joined all the sections up in Photoshop CS5, the size of the file was huge (about 21 inches by about 19 inches) It is also digitally large (about 320 MB, since the resolution is 300 dpi).
Because I want to keep the composite photo but don't want the file to be so digitally large, yet need the good resolution, I thought it would be a good to save it as a JPEG file, which would give me the dimensions I need but not be so digitally bulky as the original. On pressing the drop-down menu for Saving As, the JPEG option did not appear in the dialogue box. Why is this, and how may I save the file in JPEG format?
how do I convert a large (1-3.4 GB) .pbs, .raw or .tif file to a pdf or back to a .psd? I made a large psd file to keep as much detail as possible for a 24" x 16" actual size graphic without pixelating and with sharp edges.
The vendor wants a pdf file. How do I convert back without reducing quality of the graphic. I am using photoshop CS4.
I have cs5 and I have a whole bunch of old tiff's and I want to convert them all to jpeg's...is there a way I can do a mass conversion from one to the other. Also I want to change pix size and resolution. If so how do I do it?? I know it can be done on Elements, if I can do it on that then there must be a way to do it on cs5.
View 8 Replies View RelatedI want to blow up some prints into large formats.... How can I export in TIFF instead of Jpeg in LR5?
View 3 Replies View RelatedHow do I convert a Nikon NEF file to a TIFF or JPEG?
View 1 Replies View RelatedHow do I convert Tiff's to Jpeg's in Lightroom so I can then upload them to SmugMug?
View 2 Replies View RelatedI have tons of Jpeg I need to import to Lightroom. How can I set it to convert the images to Tiff while importing.
View 2 Replies View RelatedI am trying to batch convert several thousand TIFF files to lossless JPEG-2000, but I can't get it to work.
When I open a single file and "Save as" JPEG-2000 with the lossless option checked, the result is truly lossless. But when I record this as an Action and then Automate/Batch this action, the output is not saved as lossless.
1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
Is there any way one can convert an imported photo in Jpeg or Bmp or Tiff or any other format into lines in a drawing?
View 7 Replies View RelatedI got this workflow,
1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
Windows 32-bit OS cannot open TIFF files bigger than 4GB. I need to work on TIFF files that have a size up to 10GB. Does Photoshop support this?
View 1 Replies View RelatedWindows 32-bit OS cannot open TIFF files bigger than 4GB. I need to work on TIFF files that have a size up to 10GB. Does Photoshop support this?
View 13 Replies View RelatedIn general, I save my documents as uncompressed TIF files. On a recent project I have noticed that the files being created appear particularly large and are significantly bigger than the size indicated in the status bar.
An example:
Document is 16-bit RGB with Background layer, copy of background layer, a new layer that contains a small amount of retouching work and 3 curve adjustment layers.
Status bar shows Doc 223.3M/502.1M.
Saved file size as uncompressed TIF is 1.22 GB. This would seem rather large to me, considering how many layers are in use. Perhaps I have just overlooked the size of files generated before. I do note that deleting unused layer masks reduces the size of the saved file to about 989MB.
I saved the file as a PSD for comparison and the resulting file is 611.7 MB (with Maximize Compatibility turned on).
So, I am wondering if the above is considered normal and, if so, what the second figure in the status bar shows? Does the size displayed in the status bar refer to the document size when saved as a PSD file (rather than uncompressed TIF), is it merely an approximation of the saved file size, or do have an issue with my installation of Photoshop?
For information, I am using Photoshop CS 6 Extended (13.1.2) on OS X 10.8.2. Forgot to add that I am not using any smart objects.
I am trying to automatically slice a very large TIFF file (800 MB) into 28 equally-sized rectangles using Actions (it is a scanned image of 28 scientific slides and reducing the resolution is not an option). My goal is to start with the TIFF file and end up with a folder that contains 28 separate files. I'll do this on many such TIFF files, so it needs to be coded into an action.
So far I have an action that creates guides in a grid pattern and then converts the guides to 28 individual rectangular user slices that together cover the entire screen. Unfortunately the file is far too large to use with the "Save for Web & Devices" tool and I also can't export to TIFF from that tool. So I made an action that individually selects each slice (using the slice select tool), copies it, creates a new file, pastes the image, saves it as a flattened, non-compressed TIFF into a new folder, then closes the file. When I try to run this I get the following error:
The command "Select" is not currently available
-- Continue -- -- Stop --
If I press Continue the action is not carried out. If I press Stop and select the slice manually there is no problem (but then my action will not be fully automated). The image is in 8-bit RGB mode, and I've also tried converting the locked Background layer into a standard layer. I don't see any reason why the select command shouldn't be available! There is only one layer and there are user slices available for selection. I tried separating the slicing and select/import jobs into 2 different actions but it still didn't work.
Photoshop CS 5.1 Extended, v. 12.1 x64 - I have installed the recent update
Windows 7 64-bit
6 GB RAM
I have a job to do. It requieres me to open around 40.000 tiff files. Each file i around 1-2 GB. Some of them have to be rotated and saved, but mostly I just have to check that they looks ok and close them without saving them. Code:
View 4 Replies View RelatedI have had no trouble in the past using automate/batch to change images from jpeg to tiff and back again. For some reason this last set of images will not transfer. Everything I have done to the images has taken twice as long as usual, even simple things like just getting the image to show up (they are all tiffs now). When I finally got everything fixed up I went to change the folders from tiffs to jpegs.
 What happened is that the first image would change over then each successive one would overlay the one before it. So I could have ended with a "deck of cards" on the screen but nothing in the new folder I had created. I need to get these to a pr person asap but can't send a ton of CDs that the tiffs would take up.
Is there any work around that will force AutoCad to spool when trying to print a large .tiff image? I am trying to print an image whose file size is 150mb to a plotter.
It doesn't spool at all, it instantly prints (leaving out the image). The image is on a layer set to print etc.
I am trying to continue an assignment that I started at school today, but the Photoshop CS6 (64 bit) that I have on my laptop will not let me open any files. Not, JPEG, TIFF, PSD, PNG, nary a one of the photo types can be opened. It doesn't give me any signs of trouble or error messages. It just wont let me open a file or make a new file. I just sits there in all its power staring me down. why must Photoshop all of a sudden despise me so?
View 4 Replies View RelatedWhen I save as jepg it saves as Tiff
View 2 Replies View RelatedWhen I select jpeg in the Save As dialogue box the extension .iff appears instead.
View 4 Replies View RelatedMy camera out put is in JPEG I have no choice. While I can process jpeg with no problems in CS5 is there a better way to do this? would I be better off converting the JPEG to either tiff or psd and then process the file and then reconvert back to jpeg as the final product. I have heard so much about "lossy"(jpeg) vs "non Lossy" (tiff and psd) which are the ones I want to use?
View 5 Replies View RelatedI'm using Photoshop CS 5.1 on an iMac, running OS 10.8.2. I've encountered an odd behavior. Photoshop is open. I try to open a tif or jpeg in Photoshop by control-clicking the icon, or double-clicking in Bridge. Instead of simply opening the doc, Photoshop launches again - so now there are two Photoshop icons open in my dock. (And if I check behavior in Activity Monitor, indeed there are two Photoshop 5.1's running.) I get a message.
"The application has been moved, and its path has changed. To update the product configuration, click Update."
Click Update. Enter admin password. But then the problem simply recurs. The update isn't sticking.
The problem doesn't occur if I try to open a Photoshop doc by clicking it (just .tif and .jpg).
When I look in 'recent items - applications' in the finder I see two Photoshop 5.1's. But there is only one Photoshop 5.1 in my Application folder.
When I have two Photoshops open (as it were) neither one 'knows' about the windows open in the other. That is, if I have picture.psd open in one and picture2.psd open in the other, I don't see picture2.psd as an option in the bottom of the Window menu, if I'm viewing picture.psd.
But when I quit and just re-launch Photoshop from the dock, it remembers the docs from both launches via 'open recent'.
Most peculiar.
This really isn't inordinately impacting my workflow but it's odd, and I think it's slowing the system. (I'm thinking of updating to CS 6. Maybe it will just go away!)
Recently I have been unable to save tiff and psd files as jpegs. When I select "save as" from the file menue I do not have jpeg as an option in the drop down menue. I have always been able to save files as jpegs until recently.
View 4 Replies View RelatedHow do I changs JPEG to TIFF?
View 1 Replies View RelatedI have a large psb file which is an image of 39k by 27k pixels at 48 bpp. The image size is about 5.7 GB. PS CS6 trial only gives me the option to save it as a TIFF or Photoshop RAW only. I would like to use this large image as a master copy from which I can sample lesser quality images for printing. How can I save such images as a JPG or BMP file, that is down sample it and place the result in a smaller jpg or bmp file?
I read some other similar discussions and they all concern problems with the plugins folder. I have not inserted any plugins from previous CS versions. The only plugins that I have in there are authorized CS6 plugins for the scanner fix from Adobe. Is it even possible to down sample from such a large image?
Recently one of my photographer friend shared a scanned photograph, which was processed in photoshop and Duotone color mode was applied. So it's a PSD with Duotone color mode. Now when we go to Save as option, there is no option for saving it as TIFF or JPEG.
View 6 Replies View RelatedI have about 50 tiffs in a folder. can i duplicate each and then turn the dupes into jpegs all with one action?
View 9 Replies View Related