I have a job to do. It requieres me to open around 40.000 tiff files. Each file i around 1-2 GB. Some of them have to be rotated and saved, but mostly I just have to check that they looks ok and close them without saving them. Code:
View 4 RepliesWindows 32-bit OS cannot open TIFF files bigger than 4GB. I need to work on TIFF files that have a size up to 10GB. Does Photoshop support this?
View 1 Replies View RelatedWindows 32-bit OS cannot open TIFF files bigger than 4GB. I need to work on TIFF files that have a size up to 10GB. Does Photoshop support this?
View 13 Replies View RelatedAn associate is trying to open a 60,000 x 60,000 tiff file using PS CS5.1-Extended on a windows 7 platform with 6G RAM.
He gets the error message "Photoshop can only decode JPEG encoded images up to 32767 pixels wide of tall."
I suggested that he might have a jpeg whose extension got changed to tiff. He says no, it's a tiff, and besides how would one generate a jpeg that size.
In general, I save my documents as uncompressed TIF files. On a recent project I have noticed that the files being created appear particularly large and are significantly bigger than the size indicated in the status bar.
An example:
Document is 16-bit RGB with Background layer, copy of background layer, a new layer that contains a small amount of retouching work and 3 curve adjustment layers.
Status bar shows Doc 223.3M/502.1M.
Saved file size as uncompressed TIF is 1.22 GB. This would seem rather large to me, considering how many layers are in use. Perhaps I have just overlooked the size of files generated before. I do note that deleting unused layer masks reduces the size of the saved file to about 989MB.
I saved the file as a PSD for comparison and the resulting file is 611.7 MB (with Maximize Compatibility turned on).
So, I am wondering if the above is considered normal and, if so, what the second figure in the status bar shows? Does the size displayed in the status bar refer to the document size when saved as a PSD file (rather than uncompressed TIF), is it merely an approximation of the saved file size, or do have an issue with my installation of Photoshop?
For information, I am using Photoshop CS 6 Extended (13.1.2) on OS X 10.8.2. Forgot to add that I am not using any smart objects.
I am trying to automatically slice a very large TIFF file (800 MB) into 28 equally-sized rectangles using Actions (it is a scanned image of 28 scientific slides and reducing the resolution is not an option). My goal is to start with the TIFF file and end up with a folder that contains 28 separate files. I'll do this on many such TIFF files, so it needs to be coded into an action.
So far I have an action that creates guides in a grid pattern and then converts the guides to 28 individual rectangular user slices that together cover the entire screen. Unfortunately the file is far too large to use with the "Save for Web & Devices" tool and I also can't export to TIFF from that tool. So I made an action that individually selects each slice (using the slice select tool), copies it, creates a new file, pastes the image, saves it as a flattened, non-compressed TIFF into a new folder, then closes the file. When I try to run this I get the following error:
The command "Select" is not currently available
-- Continue -- -- Stop --
If I press Continue the action is not carried out. If I press Stop and select the slice manually there is no problem (but then my action will not be fully automated). The image is in 8-bit RGB mode, and I've also tried converting the locked Background layer into a standard layer. I don't see any reason why the select command shouldn't be available! There is only one layer and there are user slices available for selection. I tried separating the slicing and select/import jobs into 2 different actions but it still didn't work.
Photoshop CS 5.1 Extended, v. 12.1 x64 - I have installed the recent update
Windows 7 64-bit
6 GB RAM
I scanned, as a tiff file, a full-center spread of a large newspaper. This had to be scanned in eight sections, the pages were so big on my A4 scanner window. When I joined all the sections up in Photoshop CS5, the size of the file was huge (about 21 inches by about 19 inches) It is also digitally large (about 320 MB, since the resolution is 300 dpi).
Because I want to keep the composite photo but don't want the file to be so digitally large, yet need the good resolution, I thought it would be a good to save it as a JPEG file, which would give me the dimensions I need but not be so digitally bulky as the original. On pressing the drop-down menu for Saving As, the JPEG option did not appear in the dialogue box. Why is this, and how may I save the file in JPEG format?
I made a picture in HRD Pro, and i want to work on it. I saved it as a .psd and also as a .tif, but I cannot open nor the .psd, nor the .tif in Camera Raw? If I save it as a .Jpg I already lose quality..?
View 15 Replies View RelatedI am trying to continue an assignment that I started at school today, but the Photoshop CS6 (64 bit) that I have on my laptop will not let me open any files. Not, JPEG, TIFF, PSD, PNG, nary a one of the photo types can be opened. It doesn't give me any signs of trouble or error messages. It just wont let me open a file or make a new file. I just sits there in all its power staring me down. why must Photoshop all of a sudden despise me so?
View 4 Replies View RelatedI have a large 300 M layered pdf file that when I attempt to open eventually pops up the "not enough memory (RAM) message.
I am on a windows XP Power Spec computer with 1.97 GB RAM I have allocated 1106 MB for memory useage, 12 history states and 8 cache level.
I have a 187 GB Seagate exterior harddrive as my main scratch disk and a mirrored main drive C with 154 GB of free space as my second scratch disk.
I also experience a canvas disapearance occasionally when using the polygonnal lasso tool. I can be clicking along and all of the sudden the image disapears until I click again. Annoying but not unworkable.
When opening existing tiff files in Photoshop 6 they are opening very tiny in top left corner(memory can be anything from 1 mb up to 1 gb. I have to magnify each one seperately right up to see them. Never had this problem in CS 4, tried everything in preferences, view etc etc
View 3 Replies View RelatedHow to open JPG, TIFF files in camera raw from Elements 10 organizer.
View 22 Replies View RelatedPhotoshop CC is not among the programs listed and Windows won't let me add it to the list. Oddly, Illustrator CC is listed. How do I rectify this? I have Photoshop CS6 installed and that is listed. I'm running Windows 7 Ultimate.
View 9 Replies View RelatedWind 8.1.64bit
Most of the time I export photos from lightroom archive if I want to use a pic. Now I found that I can't load/edit this files in PS. Open yes, pic is to see, but there will be alwway a ring and I can't do anything. The only I can do is killing PS by TaskManager.
Open smaller pics ist just fine. So I found: convert the LR-Jpeg by another programm to 96ppi. Open it in PS an make it to 300ppi, edit the one and only layer, save it as usual Jpeg. Now it es a big edited Jpeg picture. (But doesn't make sence to change the sizes therefore) But if I try to edit this again, I will get the same hanging PS after it was opened.
Maybe it is an issue for large files in PS? And has nothing wih my LR-exported files to do?
I can't see a way to search for this issue that seems faster then looking manually. X4 will open X3 jpg's, but not X3 TIF's. X4 will open the older PSP files, but X3 TIF's show up as black rectangles in X4 workspace and won't open. I've uninstalled X3 already, but do not consider re-installing it as a solution. Previous versions of PSP have been backward compatible for me. If I open a RAW file, edit it and save as a TIF, it will open.
View 3 Replies View RelatedI work in a print shop that prints biggish stuff. I will frequently have files that postscript to close to a GB or more. Working on simple vector art with a few images in CC is not too much of a problem, but I still notice CC is slower than CS 6. The big problem is when I get a few 200mb PDF's, or files with layers of transparent PSD files in them etc, big busy files, then AI CC really bogs down, or frequently crashes altogether. CS 6 is MUCH better. I don't have the font issues, AI CC works fine with simple files. Saving & opening these big files is such a problem, I just save them back to CS 6, but that causes problems too, I do not want to, nor should I have to have 2 versions open at the same time.
I always try to optimize the files as best possible, but it is tough sometimes as they R supplied by the customer, and the time it takes. We save to a Windows Server 2008 R2 box over gigabit network, which I know is not best practice, but no choice with the sheer volume of files. Would B insane to try to keep track & copy them back & forth, and it was never a big issue with CS 6. I am the first victim in our office, but the other 3 Mac Pro's will B switching over to CC this week, and I know the operators will B crying.
Mac Pro 2.4GHZ 12 core 32GB 1TB
Mac OS X 10.7.5
I have imported roughly 100 images via scanner. Currently I am ctrl+alt+s to save as > Selecting JPG from drop > clicking save > Clicking ok JPEG Options > clicking the X to close the window ? Clicking NO to save..
way to save 100+ projects as JPEG?
I want to convert a large tiff(490MB) into a JPEG in Photoshop with CS5. The "save as" options don't show JPEG as an option. The image is in 8 bit mode already, and I've tried cmyk and rgb mode. "Save for web and devices" is also not an option. The image is one layer.
View 2 Replies View Relatedhow do I convert a large (1-3.4 GB) .pbs, .raw or .tif file to a pdf or back to a .psd? I made a large psd file to keep as much detail as possible for a 24" x 16" actual size graphic without pixelating and with sharp edges.
The vendor wants a pdf file. How do I convert back without reducing quality of the graphic. I am using photoshop CS4.
When I double-click a file it will open the file in CS6 version 13.0.1, but then after a while double-clicking will no longer open jpeg or raw files. I can open the same files by going to File > Open in the Menu Bar.
When I am simply opening downloaded files from my camera, I can open 200-300 by double-clicking with no problems. However, at times when I am working on an image, it is not long before I can't open a file by double-clicking. It will open a blank Photoshop window, but without any Toolbar or Menu Bars.
This happens on a regular basis. Sometimes, also, Photoshop is slow to Quit, for no apparent reason.
Is there any work around that will force AutoCad to spool when trying to print a large .tiff image? I am trying to print an image whose file size is 150mb to a plotter.
It doesn't spool at all, it instantly prints (leaving out the image). The image is on a layer set to print etc.
I want to blow up some prints into large formats.... How can I export in TIFF instead of Jpeg in LR5?
View 3 Replies View RelatedIs there any way for me to choose a bunch of .dsd files, and have those be batch plotted?At the moment I have to publish one .dsd file at a time, and each .dsd file can take about 10 minutes to go through all the layouts I have.
Does Autocad have that capability built in? Or is this a problem that can be solved with scripts?
I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
Photoshop CS3 (Windows) crashes when I open one particular Tiff. Two others created by the same person/system open just fine.
View 7 Replies View RelatedI have checked the Camera Raw preferences to open jpgs and tiffs in Camera Raw. I have the Bride CC preferences set to Bridge CC for jpgs and tiffs.
I c n open jpgs in Camera Raw, but I can't open tiffs in Camera Raw. I must be doing something wrong.
The settings for jpgs and tiffs in Windows file association are identical.
The settings for jpgs and tiffs in Bridge preferences are identical.
Yet, I can open jpgs in Camera Raw, and I can't open tiffs in Camera Raw.
I have enclosed the URL to a TIFF file. I am not able to open this file using Photoshop CS5, as it says unsupported file with this version.
[URL]
I have a folder of tiffs that were recovered from an sd card out of a Canon T3i. The only recovery software that worked saved them as Tiff files. I can view the thumbnail, I can even view the full res version in Windows Picture Viewer, but the files cannot be opened by Lightroom, Photoshop, Infranview or Gimp. The all spit out a message to the tune of "unsupported tiff format".
I'd be happy to just get these things into jpeg format so that I can edit them,.
I have difficulties opening tif and jpg files in camera raw. I can not access Camera Raw. With CR2 files i have no problem. So far I know all is correct in the preference dialogue box. I bought lightroom 5 also. Can this be the cause?2
View 6 Replies View RelatedI have tried changing file type associations in Windows, changing file type associations in Bridge, changing the registry, right clicking and selecting open with, and nothing works. The only way I can do it is to drag my file to the 32 bit PS icon. How do I make 32 bit the default version that opens?
View 7 Replies View Related