I use PSE to correct scanned color film negatives. If I know the temperature of the light when the photo was taken can that value be input into PSE to correct to daylight? I'm not referring to any kind of hue adjustment via slider bars, but the actual degrees Kelvin.
View 1 RepliesI have CS5 and CS3 on a system with Windows XP. My monitor is calibrated and I use a control print file for visual reference. I am unable to get corrected color on this system. The reference print looks fine in Windows, but way off in PS. I believe all my preferences are set correctly.
View 6 Replies View RelatedThe pictures came out fine. But then I upgraded to a (then) newer version of ACDSee, and the first time I opened the folder with these pictures in them, ACDSee turned them all magenta. ACDSee claims that this is impossible – but I assure you it happened...
I’ve posted one of the pictures here, including a screen shot of the Info pallet while the cursor is over an area of the image. As you can see, there isn’t any info for the yellow or black channels.
My question is – is there any hope for restoring the proper color to these images? I‘ve played around a bit with Curves, Hue & saturation, etc. - but getting natural color has eluded me. [URL]
How can I save corrected pictures from Elements 11 to Iphoto.
View 1 Replies View Relatedhow to properly link my footage on my timeline to color corrected files from film convert. I know how to do it to each individual clip at a time, but when I select a whole folder, it always relinks the media to it's original destination and not the new destination with the color corrected files. What's the correct way to link multiple clips to new source files?
View 13 Replies View RelatedI have forgotten how to get PE to use the correct version of names in People Recognition.I hit a few wrong (lower-case) keys iand those first spelling versions continue to auto-fill even when versions that start with capital letters are entered.
View 2 Replies View RelatedUsing VS PX4 file type is MTS.Color correction feature-should the entire clip be corrected prior to inserting into time line as a project?I'm using new cameras and trying to get it right.
View 4 Replies View RelatedI got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
I have a question for CS6 experts, and grateful for any responses.I'd like to paint directly onto a .obj file in 3d; doing all my texture work in PS. In earlier CS extended version, I could paint directly onto the model, and the color was opaque and gave me the pure color I was looking at.
Now, when I paint onto the modelin CS6, I see the color is diffused, or the lighting is affecting it, or it's blended with the lighting... Why? And how might I paint directly onto the model, and "turn off" the lighting without it all going to shadow? When I turn off the eye for the light, it all goes black.
Essentially, I would like to simply paint directly on the model in 3d space, creating my own light and shadow with my paint texture.. I attached an image here of what I was capable of in an earlier version; you can see that the color is "solid" and not diffused through to the lighting setup in the model. I would like to eliminate ps lighting as much as possible, and have the pure color show up on the model..
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
I accidentally rotated my canvas with the touchpad of my MacBook Pro, and can't seem to restore the orientation back to a perfect 90 degrees. How do I do that?
View 1 Replies View RelatedHow do you rotate a video clip by 90 degrees?
View 1 Replies View Relatedhow to scan an image directly into Elements 12 (for Mac). Just "upgraded" from 6 and can find no answers other than to go to Apple menu, scan in with Preview or Image Capture, save to desktop, then retrieve with Elements.
View 9 Replies View RelatedI Have down loaded up- dates so much so that you will not give me any more.But I still cannot load NEF Files on to Elements 10 Directly.
It just take a great deal of time down loading & turning them into TIFF files, is there an alternative without upsetting my bank manager?
I have macbook pro 15", early 2011, 10.8.4 mountain lion OSx, and my image viewer/ editor is iphoto 11, however iphoto is for normal beginner users (like me) and even the photo editing for adding filters/ cropping/ adjusting, nothing professional. but such work done in photoshop elements 11 and others. so I download it (PSE 11) and connect it as the editor with iphoto 11, but I faced problem while saving the photos back and I searched the net and saw video tutorial, and unfortunately so far nothing to save edited photos directly as JPEG to iphoto from PSE11.
View 5 Replies View RelatedWith Elements 11, can I write text directly onto a photo?
View 2 Replies View RelatedI've used Elements in the past, last one being Elements 8. now with E12, i'm unable to print directly to a disc. ive looked under the 'printer setting' ' paper size' ' type of printer' and nothing says CD/DVD or 80mm or 120mm.
View 3 Replies View RelatedI just downloaded the PSE 12, and I am seeing that I am unable to scan images directly into PSE 12. How do I accomplish this?
View 3 Replies View RelatedI'm using Paint.net since few years, and now I'm trying to coloring a brush with a precise color. I would like the brush to be in a blue color 3914AF (for example). I tried to use different fusion mode like "screen" on a third layer that I colored with this color...but it also let the color out of the brush itself. I thought of using the magic wandle before but to have a correct result...
HOW to change the color of any PNG brush directly in the picture in Paint.net.
Attached Thumbnails
I have PE 9 and could Share photos directly from the Edit page.I am correct that I must now go to the Organizer Bin in order to share? So far this is the only change I hate in the program.
View 4 Replies View Relatedhow to scan my photos directly into my photoshop elements9 for mac. I see the drop down for camera and videos, but there isn't a category for scanners.
View 4 Replies View RelatedHow do I apply an eye dropped color directly to a Gradient Shape? Why can't I just do it like I would when applying a flat color with the Eye Dropper?
View 13 Replies View RelatedCan I upgrade my PSE 5.0 Catalog directly to version 12.0 without loss of data (i.e. using backup-move-restore method)? the transition to 6.0 and also to 9.0 resulted in a different data format in the catalog file.
View 1 Replies View RelatedIn Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
I shoot in RAW and use the Develop module in Lightroom. I want to save the corrected RAW files as JPEGs. Do I export them to Photoshop to save them as JPEGs?
View 2 Replies View RelatedI purchased LR for the simple purpose of removing dust spots. I bought and read a book. I removed the spots, and tried to save a file of the corrected image, and could not find a way to do that. I know all about catalog = DB, but really, this product cannot save an image to disk?
View 5 Replies View RelatedI was just looking through some images and I realized that somehow I have managed to apply lens corrections to exported jpeg and tiff files. These are images that I exported from raw to tiff to jpg through Photoshop and what I think happened was that I didn't notice that Lens Corrections were being applied when I reimported the tiff back into Lightroom. Of course, the lens correction was applied when I developed the raw and made the tiff in Photoshop (or JPEG when I exported thru Lightroom), so a second correction just distorts the image.
is there some mechanism in Lightroom that keeps you from shooting yourself in the foot this way?
I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB.
View 1 Replies View Related--Toolbox: The 2 columns of Tools on the left side of the Editor screen.
--Foreground Color & Background Color: The color filled squares at the bottom of the Toolbox.
--Color dialogue box: This is the pop-up that is labeled at the top with "Color". It shows 48 different color squares (6 rows by 8 columns); they are labeled "Basic colors:". Right below the "Basic colors:" array is another 16 empty squares (2 rows by 8 columns) to be filled with colors to be defined. There is a "Define Custom Colors>>" button when clicked opens up a color picker with HSB RGB stacked below the color field screen. See this link to the Microsoft "Color Dialogue Box", [URL]
--Adobe Color Picker: The interactive dialogue box with the color field screen to the left and the HSB RGB numbers stacked on the right side.
[URL]
The problem:In PSE 10, when using the Eyedropper Tool or clicking on the Foreground Color or the Background Color, the Microsoft Microsoft "Color Dialogue Box" pops up instead of the "Adobe Color Picker" dialogue box. This started about a month ago. I use Windows 7.
I want the "Adobe Color Picker" to pop up (like it used to) inside PSE 10.
How does one make a document one color and type in text of a different color?
View 2 Replies View RelatedWhy won't the color picker change my font color? It has worked for months and today it won't.
View 1 Replies View Related