AutoCad :: Cutting A Door And A Window?
Jun 27, 2011
I have a drawing where I have to cut a door and window into a small room. I have been able to layout the location of both, but when I highlight to erase around the nodes, it just erases only those. I used the extension object snap to layout the location of both. put nodes on the ends, and centers, of both objects.
View 9 Replies
ADVERTISEMENT
Oct 4, 2013
Is the attached possible? I'm trying to cut out the plaster wrap to a wall, but can't figure out how to do it.
I've had a look at using reference planes in the door family object, but they don't seem to be able to do this?
Simply checking the wall type to wrap at only the external insert isn't going to work as I want the recess in the plaster to be away from the door frame edge.
View 3 Replies
View Related
Jun 11, 2013
ACA 2012: Is it possible to add a column to my door and window schedules that automatically shows the area of the door/window(or area of Glazing) and then have a total area column at the bottom of the column?
View 3 Replies
View Related
Nov 24, 2012
how to create a basic door and a window. I know it's easy, but I'm new to AutoCad. I'm taking a class, and I know that we use the W (Write Block) command and the I (Insert) command. I think that I have to know how to take the dimensions for a door and window and create them.
View 9 Replies
View Related
Nov 24, 2012
How to make Doors and Windows with AutoCad? I know that we use the W (Write Block) command and the I (Insert) command, but I don't know how to use them. I believe that we have to be able to use the specifications that are giving to us and make the doors and windows.
View 4 Replies
View Related
Jul 23, 2011
All my layers are turned on, when in an existing drawing my schedules do not appear when I use the tool to create them. When I open a new drawing draw a wall and a couple doors, the schedule inserts when I use the annotate tool. I am only using a basic floor plan at the moment, no xrefs or anything else, simple walls and doors and inserted from the program. I did use tags for the doors and windows which worked fine.
View 4 Replies
View Related
May 3, 2012
I use ACA 2012 for residential design - I have a wall style, 2x4 stud w/ 1.5" airspace and 3.5" brick (modified from the stock styles) - but whenever I insert a window, it makes it as wide as the wall (9") when it should be only the depth of the stud wall (2x4 or 2x6) - How can I fix this?
View 7 Replies
View Related
Aug 16, 2012
Mostly I create door/window assemblies from an elevation sketch. I make sure that the DW tool on the tool palette has all the attributes I want for the new DW. Problem is that most times the attributes do not travel across to the new DW. I have a double hinged frameless door that I want as an override assignment.
And although the infill panel style has been defined in the DW style, when I use the infill panel override assignment, the double door style is not available from the drop down box. I have copied and assigned the DW to a new style, saved - closed - opened the drawing, but the double door style is still not available in the drop down box.
View 7 Replies
View Related
Sep 15, 2011
I am having a nagging problem related to window and door cleanups in walls. Certain walls seem to lose the opening for a window or door. Sometimes, disconnecting a wall from another at a T or L insection clears the problem, but when they meet again, the all openings in that wall disappear. It looks fine in plan view, but 3d aspects of the wall are affected. This problem is also inconsistant. Quite frustrating. I've a attached a series of jpegs that illustrate a current issue.
View 1 Replies
View Related
Aug 30, 2011
I created a dog leg laundry door and window and finally got it to work but when I open the door the window pane moves with the door, also the window does not show up in the plan view. The cut plan is set at 1400 and the window sill is at 1200.
Have a look at the dwg file
View 6 Replies
View Related
Oct 18, 2013
Just moving over from Drawing Express to AutoCAD LT and I am looking for a command that will allow me to number windows and doors easily. Currently I have a command in drawing express that increases the door number each time I paste it to allow easy door/window numbering with a prefix. We tend not to create window or door schedule from these we just need to be able to number them quickly without editing the text manually each time.
View 4 Replies
View Related
Jun 5, 2012
In Autocad Architectural 2012 if I typed 'wall' I would get several options for walls. If I selected 'A' (add) it would bring up the properties panel and draw the necessary walls. This does not work in Architectural 2013. Where to I access the wall/window/door pallet?
View 4 Replies
View Related
Sep 7, 2011
How do I get my dimension styles, door styles, window styles, etc. from Architectural 2011 to 2012? I migrated but I don't see where it brought my styles over.
View 4 Replies
View Related
Jul 7, 2013
After creating doors and windows it seems the frame doesn't have any thickness. This way the wall is visible through the frame/casing of it. Is there a way to increase the thickness of the frames?
View 1 Replies
View Related
Jan 29, 2014
I have a student version of revit 2014 and all my sizing, setting out and dimensions are coming in at feet and inches. I have found out how to convert this to mm but when I load in windows and doors, all the sizes of these are in feet and inches. How to change the door and window sizes to mm so that I know what size they are.
View 2 Replies
View Related
Apr 8, 2012
I have made two outer wall and joined them together. Door cut correctly both walls but Window does not do it. What's the problem.
View 3 Replies
View Related
Feb 1, 2012
I have a model with 5 reference drawings. Everything has been going fine. I am making modifications in 2d wireframe view Then I change to realistic view and conceptual view and see that half of my windows have disappeared and some doors. I open up the first floor plan and see that most of my windows, doors, and openings are not cutting the walls. It just happened and now I cannot get them to anchor in the wall.I did purge, -purge R, audit, recover and closed and reopened the program. No Change! What could have caused all of these objects to lose their anchor?
View 1 Replies
View Related
Oct 9, 2011
How do change the door, window trim styles??
Casings - ranch (clamshell, adams, beaded, colonial)
Where are the profile to do this?
Can we download profiles?
Can we create our own?
Using demo version of Revit Architecture 2012 to see if it will meet my needs.
I do residential remodeling and show in detail our client projects, Kitchens, baths, etc..
What about product selection?
View 2 Replies
View Related
Aug 19, 2012
Is there something I have to do to load basic window and door families?
Or do I have to get individual families like Pella to get any windows?
View 2 Replies
View Related
Oct 9, 2011
Using demo version of 2012 Revit Architecture.
Need to know how to change the profiles used for door, window trim.
Default is flat casing from what I am able to determine.
I want to change to say 3-1/2" beaded casing or Adams casing. How do you do this.
View 1 Replies
View Related
Feb 28, 2012
I working on a deadline with little sleep, but I cannot believe it is this hard to get an overhead door to look right. All I want is a 1" thick frame, the same depth as the wall AND the door slab to be INSIDE the frame like a real overhead door.
The attached PDF shows the standard OH door on the left with the stupid door centered in the frame. The door on the right is one I created by inserting a cased opening in the wall, then manually drawing a rectangle and dashed line for the OH swing. All I am interested in is getting this right in plan at this point. Using Architecture 64 bit.
View 9 Replies
View Related
Feb 14, 2012
I have ACAD Arch 2012 and I am trying to associate my door tags with my door schedule and visa versa. I get as far as creating the Door Schedule with all the doors on it and quantified just the way you would want to see it; however, the "Mark" remains "A" for every door. I discovered that I can change the Mark on the extended properties of each door, but I believe there should be a better (and more linked) way to accomplish this. Since the program already recognizes how many doors there are of a specific style it should be able to put sequential "marks" to each door, for example "A", "B", "C", etc.
what's the difference between Door Tags - Project Based and regular Door Tags?
View 1 Replies
View Related
Apr 29, 2004
--Is there a way to do a door schedule by styles rather than individual door?
--To clarify: I want my door schedule to create a new door number only when one or more of the property sets, classifications, or door styles pertaining to a door are not defined by other doors in the schedule. This would facilitate giving the same door number to multiple doors that have matching schedule information, and cut down on my schedule size.
--how to do this. If I need to create custom tags, schedules, or formula properties.
View 9 Replies
View Related
Dec 24, 2011
Is there any way to get Revit window tags to behave like the door tags? The door tags seem to be instance parameters while the window tags are type parameters. I would like to use separate numbers for each window even though they are the same type. This would allow me to specify header required for each window in the schedule. I understand that I could edit the window families and save them as different files but this is time consuming. Is there an easier way?
View 3 Replies
View Related
Jan 3, 2012
How can the dimensions for the system family door be shown in the door schedule?
I tried to make a instance paramater, type parameter, both through shared parameter for the doors in the family file, but they are still not showing up.
View 3 Replies
View Related
Aug 2, 2012
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies
View Related
Dec 22, 2011
How do I assign a door tag to a facade door element?
View 2 Replies
View Related
Aug 1, 2011
I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
View 8 Replies
View Related
Dec 19, 2012
Is there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
View 1 Replies
View Related
Jun 25, 2012
the steps of drawing a door hinge. I need to draw sth similar to. dwg file attached. I assume the "Subtract" command was used! what 3D object I should subtract from a shelled-cylinder!
View 6 Replies
View Related
Dec 7, 2012
I had created a dynamic door block (my first one). As the block has door frame section on both ends, i need to place the linear distance parameter near the door hinge (and not on the basepoint for block insertion). This extends the door by 4" from the value of door opening i manually enter. Suppose i enter 42", the resultant opening will be 46". how can i make the block to accept only predefined sizes like 2'9", 3'0" etc
View 9 Replies
View Related