AutoCAD Architecture :: Unusual Window And Door Cleanups In Walls?
Sep 15, 2011
I am having a nagging problem related to window and door cleanups in walls. Certain walls seem to lose the opening for a window or door. Sometimes, disconnecting a wall from another at a T or L insection clears the problem, but when they meet again, the all openings in that wall disappear. It looks fine in plan view, but 3d aspects of the wall are affected. This problem is also inconsistant. Quite frustrating. I've a attached a series of jpegs that illustrate a current issue.
View 1 Replies
ADVERTISEMENT
Apr 8, 2012
I have made two outer wall and joined them together. Door cut correctly both walls but Window does not do it. What's the problem.
View 3 Replies
View Related
Jun 11, 2013
ACA 2012: Is it possible to add a column to my door and window schedules that automatically shows the area of the door/window(or area of Glazing) and then have a total area column at the bottom of the column?
View 3 Replies
View Related
Jul 23, 2011
All my layers are turned on, when in an existing drawing my schedules do not appear when I use the tool to create them. When I open a new drawing draw a wall and a couple doors, the schedule inserts when I use the annotate tool. I am only using a basic floor plan at the moment, no xrefs or anything else, simple walls and doors and inserted from the program. I did use tags for the doors and windows which worked fine.
View 4 Replies
View Related
May 3, 2012
I use ACA 2012 for residential design - I have a wall style, 2x4 stud w/ 1.5" airspace and 3.5" brick (modified from the stock styles) - but whenever I insert a window, it makes it as wide as the wall (9") when it should be only the depth of the stud wall (2x4 or 2x6) - How can I fix this?
View 7 Replies
View Related
Aug 16, 2012
Mostly I create door/window assemblies from an elevation sketch. I make sure that the DW tool on the tool palette has all the attributes I want for the new DW. Problem is that most times the attributes do not travel across to the new DW. I have a double hinged frameless door that I want as an override assignment.
And although the infill panel style has been defined in the DW style, when I use the infill panel override assignment, the double door style is not available from the drop down box. I have copied and assigned the DW to a new style, saved - closed - opened the drawing, but the double door style is still not available in the drop down box.
View 7 Replies
View Related
Aug 30, 2011
I created a dog leg laundry door and window and finally got it to work but when I open the door the window pane moves with the door, also the window does not show up in the plan view. The cut plan is set at 1400 and the window sill is at 1200.
Have a look at the dwg file
View 6 Replies
View Related
Jun 5, 2012
In Autocad Architectural 2012 if I typed 'wall' I would get several options for walls. If I selected 'A' (add) it would bring up the properties panel and draw the necessary walls. This does not work in Architectural 2013. Where to I access the wall/window/door pallet?
View 4 Replies
View Related
Sep 7, 2011
How do I get my dimension styles, door styles, window styles, etc. from Architectural 2011 to 2012? I migrated but I don't see where it brought my styles over.
View 4 Replies
View Related
Feb 1, 2012
I have a model with 5 reference drawings. Everything has been going fine. I am making modifications in 2d wireframe view Then I change to realistic view and conceptual view and see that half of my windows have disappeared and some doors. I open up the first floor plan and see that most of my windows, doors, and openings are not cutting the walls. It just happened and now I cannot get them to anchor in the wall.I did purge, -purge R, audit, recover and closed and reopened the program. No Change! What could have caused all of these objects to lose their anchor?
View 1 Replies
View Related
Feb 28, 2012
I working on a deadline with little sleep, but I cannot believe it is this hard to get an overhead door to look right. All I want is a 1" thick frame, the same depth as the wall AND the door slab to be INSIDE the frame like a real overhead door.
The attached PDF shows the standard OH door on the left with the stupid door centered in the frame. The door on the right is one I created by inserting a cased opening in the wall, then manually drawing a rectangle and dashed line for the OH swing. All I am interested in is getting this right in plan at this point. Using Architecture 64 bit.
View 9 Replies
View Related
Feb 14, 2012
I have ACAD Arch 2012 and I am trying to associate my door tags with my door schedule and visa versa. I get as far as creating the Door Schedule with all the doors on it and quantified just the way you would want to see it; however, the "Mark" remains "A" for every door. I discovered that I can change the Mark on the extended properties of each door, but I believe there should be a better (and more linked) way to accomplish this. Since the program already recognizes how many doors there are of a specific style it should be able to put sequential "marks" to each door, for example "A", "B", "C", etc.
what's the difference between Door Tags - Project Based and regular Door Tags?
View 1 Replies
View Related
Apr 29, 2004
--Is there a way to do a door schedule by styles rather than individual door?
--To clarify: I want my door schedule to create a new door number only when one or more of the property sets, classifications, or door styles pertaining to a door are not defined by other doors in the schedule. This would facilitate giving the same door number to multiple doors that have matching schedule information, and cut down on my schedule size.
--how to do this. If I need to create custom tags, schedules, or formula properties.
View 9 Replies
View Related
May 6, 2013
I created a new wall type that includes Stud, Sheathing, and Rigid Insulation. I need to show the existing CMU walls cutting through the new Stud walls. Can this be done?
View 3 Replies
View Related
Aug 3, 2011
Using ACA 2012 and Windows 7 Pro x64. I have a drawing with two viewports. In one I'm showing the electrical layers and the base floor plan. In the other I'm showing casework and the base floor plan. All of the layers are contained in one xref so some are frozen in each viewport. When I bind that xref using the insert method (bindtype=1) some of the electrical layers show in the casework plan. I've tried everything I know of but I can't figure out how to surpress this behavior. If I use bindtype=0 the problem goes away but I end up with ugly layer names.
View 1 Replies
View Related
Jun 5, 2012
I recently updated to Autocad Architectural 2013 and can't find the design panel for walls, door & windows. This panel created 3D objects and had grips to modify the object. Where do I find it?
View 1 Replies
View Related
Jun 27, 2011
I have a drawing where I have to cut a door and window into a small room. I have been able to layout the location of both, but when I highlight to erase around the nodes, it just erases only those. I used the extension object snap to layout the location of both. put nodes on the ends, and centers, of both objects.
View 9 Replies
View Related
Nov 24, 2012
how to create a basic door and a window. I know it's easy, but I'm new to AutoCad. I'm taking a class, and I know that we use the W (Write Block) command and the I (Insert) command. I think that I have to know how to take the dimensions for a door and window and create them.
View 9 Replies
View Related
Nov 24, 2012
How to make Doors and Windows with AutoCad? I know that we use the W (Write Block) command and the I (Insert) command, but I don't know how to use them. I believe that we have to be able to use the specifications that are giving to us and make the doors and windows.
View 4 Replies
View Related
Oct 18, 2013
Just moving over from Drawing Express to AutoCAD LT and I am looking for a command that will allow me to number windows and doors easily. Currently I have a command in drawing express that increases the door number each time I paste it to allow easy door/window numbering with a prefix. We tend not to create window or door schedule from these we just need to be able to number them quickly without editing the text manually each time.
View 4 Replies
View Related
Mar 5, 2012
ACA 2011:
I created a Dr & Wdw Assembly w/ 3 French doors w/ 3 Transoms above. It looks great. However, the door panels in Plan view are closed. Yet the in the properties dialog box it says they're each 90 degrees open. I can change the number, but the door remains closed. What needs to be tweaked?
View 2 Replies
View Related
Jul 4, 2012
I made a door tag, tagged all 128 doors and during a check set noticed that the text in the tag is the wrong font. I opened the tag and changed the font, saved and regenerated the drawing. The font in the current door tags did not change. To be sure I changed the correct tag I added a new tag and the font is correct. Why do the current tags not update? Do I need to do something? I do not want to go back and redo all 128 door tags.
View 2 Replies
View Related
May 26, 2011
In the attached image, the left is my 1st floor RCP, which looks the way I want. The right is my 2nd floor RCP, in which I cannot get the door jambs (orange lines) to turn off. Cut Planes are set identically in the two dwgs. I thought the Display Configuration settings were identical in the 2 dwgs, but clearly they're not.
View 4 Replies
View Related
Feb 20, 2011
Currently our door schedule populates when the doors are inserted into the drawing. I would like to know if I can set the schedule up so it populates when the door is tagged. Our doors are inserted into a base plan and that base plan is xrefed into various sheets.
The doors are tagged in one of these sheets and not the base plan. It takes too much time to stop and set up the schedule to schedule the doors across the xref for every project we do. I have read several articles but none of them explain how to schedule from the tag that I can see. I thought this was how the schedule was set up in a previous version.
View 3 Replies
View Related
Jul 1, 2012
I am trying to number my doors, and the door tag (AEC6_Door_Tag), won't let me create door numbers with 3 digits. I have never had this problem before. It keeps creating tags with 2 digits.
View 6 Replies
View Related
Oct 18, 2012
I have an assebly with the door going down to grade level and the flanking windows 30 inches up. I used a profile to create the assebly shape. In plan you cannot see the brick below though you can see it between the assemblies.
View 5 Replies
View Related
Aug 19, 2013
We do residential design, our doors and windows need to read 3068 and 3050 etc. I have tried everything but I cannot simply get it to work.....This is what I have done:
*Insterted a door tag from AA2014
*I exploded the tag twice and deleted the circle around the text
*Renamed the nested block and edited to include "OORSIZE"
*Went to style manager/the plan/Doc Objects/Door styles/definition/ changed it to read "STD Door Description"...
see attached file.
View 9 Replies
View Related
Feb 12, 2013
i have created a door schedule and it seems to be missing the most important part, the sizes! When I go into Style Manager and click on the door shcedule and try to add columns size does NOT come up as a choice. I have added size to the property sets of the doors. I have tried everything I can remember from older versions of Autocad and it just won't put in this bit of information.
View 6 Replies
View Related
Sep 16, 2012
is there a way to make walls looking same as in floor plans...(layers, colors, hatches). I would like to make a template for my walls looking same in sections as in floor plans. This image is what I get by default and I don't know how to change this.
View 1 Replies
View Related
May 8, 2012
I've drawn a residence in AutoCAD architecture using AEC walls and when I xref my drawing into 3ds Max to add lighthing and textures, the walls do not show up. I've done this on previous projects and there were no issues.
View 4 Replies
View Related
Aug 10, 2012
At the moment in AutoCAD (vanilla), we use different names & colors for block walls, concrete walls, etc. for easy isolation of each type, & for different lineweights (CTB). I thought of doing the same in ACA for the same reason, and so in wall styles, display properties, I changed the shrink wrap to by block.
This allows me to change the color of the walls according to the layers I put them into (in plan view). As I haven't even done a building in ACA yet, I need to find out if this method is acceptable, and what are the disadvantages, pitfalls, and if there's anything bad about it.
View 9 Replies
View Related
