I've drawn a residence in AutoCAD architecture using AEC walls and when I xref my drawing into 3ds Max to add lighthing and textures, the walls do not show up. I've done this on previous projects and there were no issues.
View 4 RepliesWe recently upgraded to AutoCAD Architecture 2013 from Architecture 2011 and am having all sorts of intermittent issues with walls showing up as single lines in x-refs (even though the file being refrenced has been brought into 2013 and shows correctly when opened by itself). We are also having intermittent issues with the plans and walls themselfs showing as a single line. I need assistance on strightening this out as we have several jobs pending construction that are all having this issue in incosestant areas.
Additional Info: Windows XP Pro - 32 Bit
I am using Autocad LT 2013 and Autocad Architecture withing the same office. When I open a file that has an Xref from Autocad Architecture with 3D walls in Autocad LT, the walls only show as 1 line instead of 2. If I open the orginal file that the Xref came from, with Autocad LT the walls show up just fine (as blocks instead of 3d walls as I expected). I am hoping to be able to veiw the Xrefs correctly in Autocad LT.
View 7 Replies View RelatedI created a new wall type that includes Stud, Sheathing, and Rigid Insulation. I need to show the existing CMU walls cutting through the new Stud walls. Can this be done?
View 3 Replies View Relatedis there a way to make walls looking same as in floor plans...(layers, colors, hatches). I would like to make a template for my walls looking same in sections as in floor plans. This image is what I get by default and I don't know how to change this.
View 1 Replies View RelatedAt the moment in AutoCAD (vanilla), we use different names & colors for block walls, concrete walls, etc. for easy isolation of each type, & for different lineweights (CTB). I thought of doing the same in ACA for the same reason, and so in wall styles, display properties, I changed the shrink wrap to by block.
This allows me to change the color of the walls according to the layers I put them into (in plan view). As I haven't even done a building in ACA yet, I need to find out if this method is acceptable, and what are the disadvantages, pitfalls, and if there's anything bad about it.
On one of our drawings all of the doors (aparently except for one) detached from their host walls. The doors were still in their places, but un-anchored. We can go through and re-anchor them, but that's a lot of work, especially since they get shifted to the point on the wall you pick to re-anchor them.
1) Is there an easy way to re-anchor them to their original location?
2) What caused this (so that we can avoid this in the future)?
Is it possible to create a custom wood frame wall type? Or maybe it already exists?
View 5 Replies View RelatedIs there a way to quickly snap to the center of wall components by using regular ( not arch ) dimensions ?
Currently I'm using snap to "mid between two points"
How can I show the CMU vertical walls in this photo butting up against the stud in the horizontal wall? Please use layman terms as best as possible in describing how to fix this problem.
View 1 Replies View RelatedIs there a trick to get spaces to be on the same level as the walls? On my 2nd floor plan located at 12'-8", the spaces are generating at the ground floor level.
View 2 Replies View RelatedAfter upgrading to ACA 2011 in plan view I am unable to snap to the edges of walls. Toggling the osnap setting check box to allow object snap to act on wall justification lines seems to have no effect as it always snaps only to the justification line and to nothing else. This is extremely annoying and makes it impossible to dimension to the face of a wall that is center justified. Is this a bug or am I missing some new setting somewhere? All my layers are unfrozen including layer 0.
View 9 Replies View RelatedI can't find the way to unmerge previously merged cells in curtain walls.
View 2 Replies View RelatedI have a series of 3d walls in autocad Architecture 2012 and an existing CAD 2d structural column layout.
I need to remove/cut or trim the wall around the HSS columns on a floor plan. The walls show the consttruction of the wall and I can't seem to create a void or mass to cut out around the column. Is there an easy way of doing this so that I can just place this in a block to auto cut the wall. My hope was to create a column block so that I can just drop the HSS columns wherever i want them.
I know i can use a wipeout to clear the area however, that is not ideal as we have other linework that need to be visible.
I am using ACA generic walls and doors for quick schematic room layouts.
I use the sheet set manager to make sheet with views.
All 2D linework is visible in the views, but the walls and doors (AEC objects) do not appear!
I'm using AutoCAD Architecture 2009. I xref a lot of floor plans underneath my new floor plans to trace different walls, roof outlines etc and ever since I started using the smart walls this has become a real pain. When I xref in a demo floor plan for example underneath my new remodeled plan the walls from the xref interact with the new walls and of course bring up all the error triangles.Is there a way to make the xref not interact with the plan that it is being place under?
View 3 Replies View RelatedI have a drawing containg wall elements that is referenced into a whole bunch of other drawings (roughly a hundret).
In the wall-drawing i recently set the walls color to "by layer" via the display properties in style manager.
Unfortunately they keep their old color in the other files. I tried visretain and it didn't do the trick.
I am having a nagging problem related to window and door cleanups in walls. Certain walls seem to lose the opening for a window or door. Sometimes, disconnecting a wall from another at a T or L insection clears the problem, but when they meet again, the all openings in that wall disappear. It looks fine in plan view, but 3d aspects of the wall are affected. This problem is also inconsistant. Quite frustrating. I've a attached a series of jpegs that illustrate a current issue.
View 1 Replies View RelatedI'm trying to make walls that are not just the Standard type (Brick -4 Brick -4 Furring for example) but when I make a wall of this type, it displays as a simple rectangle, instead of with the unique hatch patterns of that wall type...In the properties palette, the wall type is Standard, even though I've chosen a more specific wall type. How do I make walls that aren't Standard?
View 1 Replies View RelatedI am working on my electrical plan with the floor plan xref'd. I am able to get the entire floorplan to plot lighter using the 25% saturation feature in layers. The walls print ghosted, but the hatch that is on the same layer as the walls stays dark. I tried creating a seperate wall section All layers on the floor plan dwg that are xref'd in are the same in the layers dialog.
View 3 Replies View RelatedI am using the the tool palette to build exterior walls.. I have the wall as needed finished except for a limestine sill. It is bull nosed and contoured. How do I put the profile in the wall style so it looks correct?
View 8 Replies View RelatedI am experiencing problems with AutoCAD Architecture when drawing a standard wall. When I change the display to read High Detail nothing seems to change - I cant see the hatch patterns for brick/block.
I have ensured that I am on the correct template
Aec Model (Metric Ctb).dwt
But i cant seem to get it working.
We have an interior space built out for a commercial project incorporating curved walls in 3D. We need to generate a 2D drawing to be turned over to the on-site architect. Generating a 2D section yeilds a faceted wall. AECFACETDEV has no effect on the curve quality. Is there a control for Horizontal section? Walls do not show up using flatshot so that is not an option.
View 9 Replies View RelatedWe have a house plan that has windows and doors of different types anchored to their walls. It seems that whenever someone is working in a file from the network that has the plan xrefed into it and the plan is opened to be modified by another user the windows and doors randomly detach from the walls. We're getting tired of going back in and reanchoring them.
(We're using Autocad Architecture 2009 on Vista)
I have drawings that were made in AutoCAD Architecture 2008 that when opened in AutoCAD Architecture 2012, the 0-width walls in the drawing don't show up anymore. The only solution I found was to change the Base Height in the properties of the wall (which I accessed by choosing the zdiagnostics display setting) to 10' instead of the standard 1/2" that we normally use.
I'm guessing it has to do with the wall styles as they were transferred from out 2008 to our 2012 template.
After having a problem projecting my walls to my roof slab (flat roof), which worked fine in previous sessions; and then trying the standard solutions of making sure my walls clean up properly, etc., I determined the problem was actually in that the walls do not like to project to a roof with components. In my last work session, I added a component to my roof. I switched back to a "standard" roof slab, projected the walls, and then switched back again to my roof with components.
View 1 Replies View RelatedI am opening a file from 2004 and I am using AutoCAD Arch 2012. When I open the file everything is there, but the doors do not cut through the walls. The doors are still there but are not "anchored". Is there a way to fix this easily? I also lost everything out of my door schedule. I know I will get my schedule back when the doors get anchored back to the wall.
View 1 Replies View RelatedI have a model with 5 reference drawings. Everything has been going fine. I am making modifications in 2d wireframe view Then I change to realistic view and conceptual view and see that half of my windows have disappeared and some doors. I open up the first floor plan and see that most of my windows, doors, and openings are not cutting the walls. It just happened and now I cannot get them to anchor in the wall.I did purge, -purge R, audit, recover and closed and reopened the program. No Change! What could have caused all of these objects to lose their anchor?
View 1 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame for walls when displayed in 3D
View 9 Replies View RelatedI am creating a two-storey single-family house. The exterior wall assembly is Core Boundary, 3/8" Stucco (we apply a Stucco material to our Sheathing so in Section we aren't showing a finish material on the exterior), 5 1/2" <By Category> (our studs), Core Boundary, Air Barrier, 1/2" Gypsum Wall Board. We draw the floor system to the face of our studs and extend our walls to the bottom of the floor system, then when we join geometry the floor cuts out the wall leaving only the wall sheathing extending to the face of our floor system.
My problem is when I create a 3D perspective view with the camera my floor system is showing through the walls. It seems to thin out/disappear the larger the perspective view is on the page, but I can only make it so big on C-size page.
Is there a way to hide what Revit shows detailed behind the face of a material?(I tried hiding the floor system in my perspective view but it stills shows the floor outline, I'm assuming because it is being cut out of the assembly).
I have an assignment to draw a bathroom. I have walls that are spaced 3 5/8 inches apart and the drawing shows insulation batting between them. When I use the batting insulation linetype and run a line between the walls the batting symbol extends beyond the 3 5/8 inch walls. how do I get it to fit between?
View 9 Replies View Related