i am trying to use autocad to nest parts for cutting on a cnc machine. is there any way to make a 2d part have a projected boundary of say .5 inches larger than the part so another part cannot nest closer than that. after the nesting is done, the boundary would be removed. the parts are different sizes and shapes so the projected boundary would have to enclose the part.
View 6 Repliesi am trying to find out how to use autocad to nest objects for cutting on a cnc machine. it would require a lengthy discussion and i dont know if this is a appropriate forum for it.
View 6 Replies View RelatedI need to cut some flat veneer using a laser machine, like making a jigsaw puzzle. The laser operator needs a drawing in the .dwg format.I will be drawing a 2d shape using a photograph in the background to copy.
I need to make the shape cut up into sections so I can assign a different bitmap to each section, at least for the design part of it. Since I'm more familiar with Max it'd be easier to do the design work there and export the file.
What I need is to make 2 or more closed spline objects that share adjacent lines so that each section has a surface that can accept an individual bitmap.
CAM software that will run a hot wire CNC machine used for cutting EPS foam? I am using Inventor to create my product drawings and I want to use an integrated CAM software to create the G-Code to run my hot wire CNC.
View 1 Replies View RelatedHow Solidworks has the ability to output G-code to machine parts without the use of a seperate CAM software.
If Inventor has the ability to do this with some sort of add on? Or even if Autodesk offers a program that does this that would work well with Inventor or if I must use a seperate CAM software to do it. I have used Mastercam in the past but wasn't sure if there was an easier way to do so.
We recently upgraded to 2014 and have been experience significant issues with plotting to PDF. When plotting individual pages, we are able to center the plot and adjust the margins to where they will plot correctly. However, when trying to "batch publish" mutiple layouts of a drawing they all come out off center or parts of them are being cut off.
View 2 Replies View RelatedFlat pattern sheet metal with a hole cut at an angle. Once flattened it should be 90 deg. to the surface of the sheet for laser cutting. I cannot get inventor to do that.
See images for more details.
Autodesk Inventor 2011 SP2
Windows 7 Ultimate 64-bit
Processor: Intel(R) Xeon(R) CPU W3503 @ 2.40GHz
RAM: 12 GB
SpacePilot Pro
how I'm supposed to cut off parts of a picture. I know about cropping but that only seems to work only with perfect squares and rectangles. I'm trying to get a picture to look like the edges are actually torn missing (not black or white, but instead actually not on the picture).
I'm wanting all of the black that you see on the holes in the middle and on the edges to actually be cropped off or gone without cutting off anything else. So I don't want it to be a perfect square when it's done but instead have jagged ripped looking pieces on the edges with holes in the middle.
I see in alot of graphics are precisely cut out. For instance i saw a graphic with a city in the background and in the lower foreground was a bunch of hands sticking up in the air (like a crowd with the hands held out into the air). Each hand was perfectly cut out though...each individual finger etc. How is that done? How do you precisely cut out things...do people jsut sit there, zoom in and spend there time accurately cutting out whats necassary? What tool is used?
View 9 Replies View RelatedI need to divide a shape, say ellipse or similar, into 1 or 2 parts and then color the parts different colors and stroke the borders of each part. I don't want to cut the shape up, just keep it as a multi-colored object.I've tried scissors and similar tools but they cut and this is not what I want.
View 10 Replies View RelatedI have some parts that I need to make a nest for. I get the part from a customer and it's not in the most usable shape. It's just a bunch of surfaces. I can't change anything from it. I create a square block and place both the block and the part into an assembly. In the assembly I place the part in the block how I would like it to go. From there I create my whole mechanism around these nested parts. What I need to do is cut the shape of the part into the block so that I can bring the block into a CNC program and mill it.
View 9 Replies View RelatedI have a part that I get from a customer that is imported into Inventor. The part doesn't' come in as a solid, I can either bring it in as surfaces (thousands for them in fact) or as a composite. What I want to do is create a nest for the part to fit into on the machine I am building. I create a part thats nothing more than a block, bring the part and the block into an assembly and I place the part into the block where I want it to go. What I need is to be able to cut the contour of the part into the block. I use Mastercam for my milling programs and what I ultimately need is just the surfaces (the top surface of the block and the cutout surface).
View 4 Replies View RelatedGot a new computer. Copied and upgraded Photoshop CS2 to CS5. I would like to give the old computer to a family member or friend. Will they be able to use the CS2 on the old machine? (an iMac 10.6) or is that the end of that CS2?
View 32 Replies View RelatedIs there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View RelatedCan I create popup button control underneath another pop button control?
I can do this with .net controls, but I can't seem to get this to work with Inventor. Whenever I try to add a command bar to another command bar.Controls I get an Invalid Parameter error.
Here is what I am referring to. I would like to be able to add a menu below a menu.
Is it possible to nest my profile drawings to reduce material wastage with Inventor? If not, where I can download any freeware that can perform this task.
View 3 Replies View RelatedI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
I have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
View 0 Replies View RelatedI am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies View RelatedOn the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies View RelatedIs there anyway to get a timestamp onto the idw. I have been using the one that could be down loaded that Steve Krause had made but that one doesn't work on a 64 bit machine.
View 5 Replies View RelatedI need to list all the profiles on a given machine and add a new profile if its not in the list. Is this possible in c#?
View 2 Replies View RelatedI have a DXF file in Autocad LT which I need to import into a CAD Reader for a CNC machine. The cad reader can only view a 2D image of the TOP of the part. The problem is that the view I want the cad reader to see is the RIGHT hand side view in Autocad. Is it possible to reassign the views in Autocad LT 2008 so that the right hand side view become the top view therefore allowing the cad reader to see the correct side.
View 2 Replies View Related