AutoCAD .NET :: How To List All Profiles On Machine
Jun 8, 2012I need to list all the profiles on a given machine and add a new profile if its not in the list. Is this possible in c#?
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: How To Get A List Of All Profiles
Jun 7, 2013I want a list of all profiles in the drawing. How can i do?
I have a list of all alignments with:
ObjectIdCollection alignColl = civDoc.GetAlignmentIds();
But profiles don´t have the method GetProfilesIds();
or how to check if each alignment has any profiles?
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
Photoshop :: CS5 / Delete Unwanted Profiles In List?
Sep 28, 2012I've got CS5 and I'm still learning the ropes. I've advanced to creating my own ICC print profiles, which I'm using. CS5 has a long list of these in the print dialogue. I have occasionally updated the profiles that I have created ( which now appear in this list). I want to keep the list up to date with regards my own profiles and delete the ones that have been superceeded. I've looked through my folders (Windows 7) but I can't find where they are stored.
how I delete unwanted profiles in the list? Can it be done whilst in CS5?
Lightroom :: Reduce List Of Camera Profiles?
Jun 8, 2012LR4.1 on OSX 10.7.4.
For the D700, LR has several "extraneous" camera profiles that I don't care about: a half-dozen or so D2X profiles(?), and both pre-v4 and v4 versions of the five standard ones (standard, landscape, etc.)
I would like to get rid of the extras, i.e. take them off the list, to make choosing the profile I want easier. IOW, I would like there to just be the five v4 profiles on the list.
For LR3.6, the profiles were in /Library/Application Support/Adobe/Camera Raw/Camera Profiles/Camera. I zipped up the profiles I didn't want, then deleted the individual files, and everything worked great, i.e. LR only showed the five remaining profiles.
However, 4.1 apparently doesn't use that location, because it still shows the entire list. I poked around a bit and found the profiles apparently embedded in the app directory, i.e. LR.app/Contents/Resources/Camera Profiles/Camera. That seems … odd. (Do both Photoshop CS6 and LR4 have them embedded in the respective apps, thus duplicating all of those files?) In addition, it makes it harder to do what I'm trying to do, because OSX complains that LR.app can't be changed.
So, is there a "valid" way to do this in LR4.x?
Lightroom :: How To List Third-party Colour Profiles
Dec 10, 2012I just installed the drivers for an Epson 4900. The new profiles don't show up in the color management in the print module. I'm using a Mac with mountain lion.
View 4 Replies View RelatedPhotoshop :: How To Access List Of Paper And Printer Profiles
Apr 29, 2013I used to use Photoshop CS on my old computer. There it was possible to choose from a large list of profiles for different paper-types and different printers. I have now got a new Intel Mac (OS 10.8.3). I have installed Parallels so that I can run a 10.6 Snow Leopard server; and I have installed Photoshop CS2 in it. To my surprise and dismay, I cannot find out how to access the list of paper and printer profiles any more.
View 2 Replies View RelatedLightroom :: Lens Profiles In Distortion Correction List Are Small
Jun 4, 2013My lens profiles in the distortion correction list are small. I looked at the official list and mine is not right. I only have one Tamron lens profile. Nikon and Canon only have about 6 lenses each. What gives?
View 2 Replies View RelatedPhotoshop :: Upgrade To CS5 On New Machine Invalidate CS2 On Old Machine
Aug 4, 2012Got a new computer. Copied and upgraded Photoshop CS2 to CS5. I would like to give the old computer to a family member or friend. Will they be able to use the CS2 on the old machine? (an iMac 10.6) or is that the end of that CS2?
View 32 Replies View RelatedAutoCAD Civil 3D :: 2013 - Dynamic Surface Profiles Acting As Static Profiles
Nov 14, 2012I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
Photoshop :: Find ICC Profiles / No Scanned Profiles Are Available
Mar 31, 2013Trying to find ICC Profiles. I am a college student going for my BS in Photography. Our assignment is to take photo paper from three different manufactures and download the ICC Profiles for each of our papers chosen. Let me tell you this is not as easy as it seems! Where I can find the profiles for Adobe PS for different types of photo paper. Each manufacture only gives the ICC profile for their products. No scanned profiles are available.
View 3 Replies View RelatedAutoCad :: Generate Part-list And Order-list In 2011?
Oct 5, 2011I have some blocks (different exit signs) in a drawing. I want to make a table or excel sheet that sums up the number of equal blocks in the drawing. How can i make this?
I want to connect this tabel to excel 2010.
I use AutoCad LT 2012.
AutoCAD Visual LISP / AutoLISP :: Add List To A List
Jul 15, 2013I have a list -
(setq List1 (list "Line A" "Line B" "Line C"))
I would like to add each item in an existing list to a new list -
(setq ListNew (list "This is some text" "This is more text"
the following is the part I can't figure out - it just adds the list to the list, not the individual items
(mapcar '(lambda (x) x) List1)))
I am looking for ListNew to be - (a list with 5 strings)
"This is some text"
"This is more text"
"Line A"
"Line B"
"Line C"
AutoCAD Inventor :: Timestamp For IDW On 64 Bit Machine
Mar 2, 2010Is there anyway to get a timestamp onto the idw. I have been using the one that could be down loaded that Steve Krause had made but that one doesn't work on a 64 bit machine.
View 5 Replies View RelatedAutoCad :: Import Into CAD Reader For CNC Machine?
Aug 15, 2012I have a DXF file in Autocad LT which I need to import into a CAD Reader for a CNC machine. The cad reader can only view a 2D image of the TOP of the part. The problem is that the view I want the cad reader to see is the RIGHT hand side view in Autocad. Is it possible to reassign the views in Autocad LT 2008 so that the right hand side view become the top view therefore allowing the cad reader to see the correct side.
View 2 Replies View RelatedAutoCAD Architecture :: 32 Bit Machine Changing To 64 Bit
May 4, 2012If I create a drawing in AutoCAD Architecture 2010 on a 64 bit machine is there any way I can still plot using my old 32 bit printers?
I'm thinking print to dwf or PDF then open the file on my old 32 bit machine for printing?
AutoCAD Civil 3D :: Machine Won't Save Dwg?
May 9, 2013this is the message I get when trying to save, One or more objects in this drawing cannot be saved to the specific format.
The operation was not completed and no file was created. I was able to save at lunch and now its not a happy camper.
AutoCAD 2013 :: Exporting To DXF For CNC Machine
Jul 1, 2013I am trying to figure out how to get autocad2014 and our company's cnc machine to communicate.
The machine uses Solid Ultimate with Screen-to-machine software.
From what ive gathered, I can save my drawing as a R12, R13, R14 version dxf file, which is what is needed for the two programs to talk to each other. The problem is, when i save the dxf file, it saves paper space, not model space. Therefore, all that comes into the cnc program is a titleblock or whatever else I had on the page in paper space.
The cnc program doesnt pick up viewports either.
I need a way to save model space as dxf.
AutoCAD .NET :: Sheet Set Components Error On Win 7 64-bit Machine
Jul 25, 2011I have one user on a Win 7 64-bit machine running 64-bit Autocad / ACA. I have written a routine that references the ACSMCOMPONENT library and I get an error that says the system can't find that library file. I have attached a screen shot for review.
All of my other machine are Windows XP and the .DLL that I wrote is located locally withe the ACSMCOMPONENT.dll in the same directory.
I have done some research and have concluded that I need a 64-bit version of the ACSMCOMPONENT.dll and I don't know where to get it or how to create it if possible.
AutoCAD Inventor :: BOM Casting / Machine / Assembly
Sep 28, 2012These will be family table parts and assemblies but just to keep it simple for now lets look at non family table parts and assemblies.The attachment is a drawing of a casting, a machine part that is made from the casting and an assembly that uses the machine part.
The casting will have a drawing that has no BOM.The machine part will have a drawing that has a BOM that calls out the casting.The assembly will have a drawing that has a BOM that calls out the machine part.
In the models:
I would like to have an assembly and a machine part the is linked to the casting part so if the casting part changes the machine part and the assembly changes.
In the drawings:
I would like to be able to use existing iproperties or user defined ones and use one parts list style so I can create a drawing of the casting, create a drawing of the machine part where the bom calls out the casting description and part number and a drawing of the assembly that calls out the machine description and part number.
AutoCad :: Can 32 Bit Version Of 2012 Be Installed On 64 Bit Machine
May 7, 2012Can a 32 bit version of AutoCAD 2012 be installed on a 64 bit machine with windows 7 and a 64 bit version of AutoCAD 2012 on it? It is a network machine.
View 4 Replies View RelatedAutoCad 3D :: Machine Lagging On Roof Tiles
Jul 21, 2011I am currently drawing some roof tiles for a house in 3d. I moved the tiles to another drawing so i could get my machine to focus on the tiles rather than walls, windows, doors etc. My machine is still lagging hectically. Basically i would like to know is there a way i can perhaps make the roof tiles file smaller or a "block" of it so that my machine can run properly and i can import it into the drawing with the rest of the house. The roof tiles drawing is 40.3mb big. My machine isn't inadequate-hopefully.
I am on a mac running vmware fusion with windows 7 32-bit and when opening editing the roof tiles file my cpu % spikes to roughly 70% then backs quickly down to 50% and will not increase with Autocad not responding-leave it for a bit and it loads but lags a bit when i orbit, copy or whateva then back to not responding.
AutoCad 2D :: Nest Objects For Cutting On Cnc Machine?
Jan 31, 2012i am trying to find out how to use autocad to nest objects for cutting on a cnc machine. it would require a lengthy discussion and i dont know if this is a appropriate forum for it.
View 6 Replies View RelatedAutoCad :: How To Make Mtext Into A Vector To Machine
Jul 27, 2012I have a problem with a drawing that was sent to me, a small description, it is a wine tasting table drawing the table is divided into squares with numbers in front of each square, so i have to machine in all the squares and numbers the only problem is the numbers are mtext and i need to be able to make them into a vector to machine.
View 2 Replies View RelatedAutoCad :: Nest Parts For Cutting On CNC Machine
Dec 17, 2011i am trying to use autocad to nest parts for cutting on a cnc machine. is there any way to make a 2d part have a projected boundary of say .5 inches larger than the part so another part cannot nest closer than that. after the nesting is done, the boundary would be removed. the parts are different sizes and shapes so the projected boundary would have to enclose the part.
View 6 Replies View RelatedAutoCad :: Drawing For Laser Cutting Machine
Jun 22, 2011I need to cut some flat veneer using a laser machine, like making a jigsaw puzzle. The laser operator needs a drawing in the .dwg format.I will be drawing a 2d shape using a photograph in the background to copy.
I need to make the shape cut up into sections so I can assign a different bitmap to each section, at least for the design part of it. Since I'm more familiar with Max it'd be easier to do the design work there and export the file.
What I need is to make 2 or more closed spline objects that share adjacent lines so that each section has a surface that can accept an individual bitmap.
AutoCAD 2013 :: Model A Coil For Tattoo Machine
Jan 8, 2013I am trying to model a coil for a tattoo machine. I have all of the helixs made to replicate the wire wrapping around the bobbin of the coil but i cannot figure out how to get the helixs to blend together smoothly. I.E. have the end of the inner coil bend outward gradually to meet the starting end of the next level helix.
View 1 Replies View RelatedAutoCAD 2013 :: How To Bring JPEG Logo On Machine In 3D
Jan 27, 2013In 3D drawing, how can I bring (or paste) a logo (JPEG format) on equipment . For instance logo of a company on a machine. How to do that in AutoCAD not Inventor.
View 5 Replies View RelatedAutoCAD Civil 3D :: Saving Layer States From One Machine To Other
Apr 24, 2013Can you save a layer state so that if someone gets into my dwg on their PC they can access the layer states the dwg that I set up?
View 2 Replies View RelatedAutoCad :: Transfer Standalone Copy Of 2013 From One Machine To Another
Oct 9, 2013I am trying to transfer a standalone copy of autocad 2013 from one machine to another. I have already uninstalled it from the old pc, and when I got to install it on the new pc it asks for registration. When I put in the numbers it tells me that it is not valid.
How can i De-activate it from the old pc if it is already uninstalled?
AutoCAD Architecture :: Transfer Custom Toolbars From One Machine To New One
Sep 30, 2012We have a new MEP engineer starting and we purchased MEP 2013.
He has some custom toolbars in ACA 2011 and would like to transfer them from one machine to the new machine.
How do I do that? Can I use the CUI dialog box to transfer it?
AutoCAD 2010 :: Modify DEFAULT SCALE LIST To Show Metric Scale List In Imperial Template
May 2, 2012Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View Related