AutoCAD Civil 3D :: How To Get A List Of All Profiles
Jun 7, 2013
I want a list of all profiles in the drawing. How can i do?
I have a list of all alignments with:
ObjectIdCollection alignColl = civDoc.GetAlignmentIds();
But profiles don´t have the method GetProfilesIds();
or how to check if each alignment has any profiles?
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 2 Replies
ADVERTISEMENT
Nov 14, 2012
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 1 Replies
View Related
Jun 8, 2012
I need to list all the profiles on a given machine and add a new profile if its not in the list. Is this possible in c#?
View 2 Replies
View Related
Sep 28, 2012
I've got CS5 and I'm still learning the ropes. I've advanced to creating my own ICC print profiles, which I'm using. CS5 has a long list of these in the print dialogue. I have occasionally updated the profiles that I have created ( which now appear in this list). I want to keep the list up to date with regards my own profiles and delete the ones that have been superceeded. I've looked through my folders (Windows 7) but I can't find where they are stored.
how I delete unwanted profiles in the list? Can it be done whilst in CS5?
View 3 Replies
View Related
Jun 8, 2012
LR4.1 on OSX 10.7.4.
For the D700, LR has several "extraneous" camera profiles that I don't care about: a half-dozen or so D2X profiles(?), and both pre-v4 and v4 versions of the five standard ones (standard, landscape, etc.)
I would like to get rid of the extras, i.e. take them off the list, to make choosing the profile I want easier. IOW, I would like there to just be the five v4 profiles on the list.
For LR3.6, the profiles were in /Library/Application Support/Adobe/Camera Raw/Camera Profiles/Camera. I zipped up the profiles I didn't want, then deleted the individual files, and everything worked great, i.e. LR only showed the five remaining profiles.
However, 4.1 apparently doesn't use that location, because it still shows the entire list. I poked around a bit and found the profiles apparently embedded in the app directory, i.e. LR.app/Contents/Resources/Camera Profiles/Camera. That seems … odd. (Do both Photoshop CS6 and LR4 have them embedded in the respective apps, thus duplicating all of those files?) In addition, it makes it harder to do what I'm trying to do, because OSX complains that LR.app can't be changed.
So, is there a "valid" way to do this in LR4.x?
View 2 Replies
View Related
Dec 10, 2012
I just installed the drivers for an Epson 4900. The new profiles don't show up in the color management in the print module. I'm using a Mac with mountain lion.
View 4 Replies
View Related
Apr 29, 2013
I used to use Photoshop CS on my old computer. There it was possible to choose from a large list of profiles for different paper-types and different printers. I have now got a new Intel Mac (OS 10.8.3). I have installed Parallels so that I can run a 10.6 Snow Leopard server; and I have installed Photoshop CS2 in it. To my surprise and dismay, I cannot find out how to access the list of paper and printer profiles any more.
View 2 Replies
View Related
Jun 4, 2013
My lens profiles in the distortion correction list are small. I looked at the official list and mine is not right. I only have one Tamron lens profile. Nikon and Canon only have about 6 lenses each. What gives?
View 2 Replies
View Related
Dec 12, 2013
I have 2 alignemnts and 2 profiles, is there a way to to combine both alignment profiles to one profile? What I am doing is moving the centerline of a road over 10 feet, so that is why I have 2 alignments (existing CL and new CL). So what I want to show on one profile is existing centerline, existing centerline of new centerline, and proposed centerline of new centerline.
View 2 Replies
View Related
Jul 17, 2013
I have a question about profile table.As I indicated in this picture, I wanna to have 2 different number for each profiles but this table repeats only EG number.
View 4 Replies
View Related
Aug 31, 2012
I am using Civil 3D 2012. I am drawing a water line in a profile with a vertical scale of 1" = 10'. I am trying to draw lines at 45 deg angles to account for standard fittings.
Now, I tried to block a 45 deg angle and exaggerate the y scale, but for some reason this does not work well mathematically. Is there a way to draw lies at a certain slope, or at a certain angle from another line, while taking into consideration the scale exaggeration?
View 1 Replies
View Related
Oct 19, 2012
I have found recently that surfaces that are sampled in profile views are not synchronized when the drawing is opened. This is incredibly frustrating when I'm just opening a file to plot a new copy. If I forget to resynchronize the drawing, the sampled profiles will not plot.
Is there a system variable I might try to toggle?
View 9 Replies
View Related
Sep 26, 2012
is there a way to create a few profiles say at 0.5, 1.0, 1.5 and 2.0m vertically above the profile of the ground? without creating the surface again and change the elevation 4 times and making 4 data reference. using those lines for design guides for minimum fill requirements when doing FG profiles. before i just copy, then explode then move the original profile as a polyline. i actually have to explode the polyline after because it's laggy to zoom in the profile for some reason. once lines it's ok. but then again it's not dynamic. i changed my alignment and then those line stayed then have to do it all over again. this maybe a good feature to have next version.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 9 Replies
View Related
Jun 24, 2011
Our firm has finally decided to leave LDC 2009 behind and moving to C3D 2012.I would like to ask a few questions about the way plan and profiles are created with C3D.
In LDC, we would create a full profile that included everything in it, that is proposed and existing centerline elevations and left and right top of curb elevations. Then on the sheet layouts, we would make many viewports that showed the proposed and existing sets, that is centers, lefts and rights. (medians in the example attached)
I've been watching many online videos on how to sample center, left and right and how to create a proposed center line but I can't figure out how to make a proposed left and right profile so that I can control drainage into existing inlets.
View 8 Replies
View Related
Jun 13, 2013
I have a couple of files with DS surfaces that I cut profiles with and all was fine until today. the surface ref is in the drawing but does not display. If I zoom to it goes to a location not related to the site but there is no display of the surface (all layers and style set to display) this is what view props shows. notice the odd serial number for the data source. through tools space I deleted the refs and re-refed and sampled, but when I close and go back its gone again.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
View 9 Replies
View Related
Jul 15, 2013
i need to label the same pipe in 2 different profiles
View 2 Replies
View Related
Aug 6, 2013
I'm working on profiles for the first time - built my pipe network.
I have these dotted ghost lines - what they are and what I might have "on" that is causing them?
View 6 Replies
View Related
Dec 16, 2011
Noticed that after the last update many profile settings like snap aperatures, OSNAPS, and data shortcut working files aren't being remembered? It has only happened to a couple people, but they are having the exact same issues.
I wish it was simple as the shortcut being reset or pathed to the wrong profile, but it's not the case.
View 3 Replies
View Related
Apr 11, 2013
I've heard it said that it's possible to make two separate layout profiles dynamically dependent. For example, making a driveway centerline profile dependent on the roadway centerline profile it's connected to. The idea is that if you revise the roadway centerline profile, up or down, that the driveway profile will automatically go up or down with it.
Is this true? I didn't readily see anything in the profiles area of the docs or the tutorials.
View 5 Replies
View Related
May 8, 2013
If I have a drawing scale set up as 1"=30' and I created some profiles at that scale, and then I need to create a profile at 1"=40' horiz and 1"=4' vert., what is the best way to do that? I believe in the past I tried changing the drawing scale under settings to 1"=40' one time and all of the profiles in the drawing changed to that same scale even though they were drawn at 1"=30', which I want to stay that way.
I think I can leave the drawing settings to 1"=30 and then just assign the scale in the viewport to 1"=40', but then all of the text sizes in the profile view style will adjust according to the scale I use, which will either increase or decrease according to the scale I pick. I would like to keep the profile view style consistent no matter what scale I pick.
View 5 Replies
View Related
Nov 2, 2012
Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 2 Replies
View Related
Jun 13, 2012
How do you get pipes to show on the profiles when there is a side pipe from a different alignment that enters an inlet?
I went to Profile View Properties / Pipe Networks and checked the side pipe to draw and changed the style overide to crossing, but nothing shows in the profile.
2013 Civil 3D
View 4 Replies
View Related
Aug 27, 2012
What is the most current Civil 3D workflow recommendation from Autodesk, for people who are required to show and label three profiles: centerline, left and right gutter flowlines; on a plan and profile sheet for drainage review? The gutter flow line profiles are required to show their true longitudinal grade.
Just looking for the main salient steps at the conceptual level.
View 4 Replies
View Related
Apr 24, 2012
I'm slowly getting familiar with the new pressure pipe tools. So far I like the layout compass but I'm finding the rest to be rather cumbersome to work with.
One problem I have is how to straighten portions of a pipe in profile after fitting it to a surface profile. Each pipe ends up segmented according to it's cut length property. Typically after fitting it to a surface profile we want to straighten the pipe between critical points along the profile. I don't see any way to do this aside from dragging each segment. Is there a way to remove, add or adjust the length of individual segments?
I don't see any other than the videos provided in the new features catalog.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 1 Replies
View Related
Jun 17, 2013
So I had to jump into the middle of a project. The Viewframes were already created but when I go to the plan and profile sheets for the viewframes the profile is not showing and I'm not sure how to choose the correct profile and display it in the corresponding plan and profile sheet.
View 8 Replies
View Related
Jan 21, 2013
I'm totally new in Civil 3D. I'm using 3D laser scanner to measure and lately draw 3D "as build" models of tunnels, bridges etc. So now I have 3D model of bridge, which is simply created with layers, 3d faces, boxes etc. - primitive ACAD 3D modelling.
Now I want to create sections on multiple stacions. How to start? Is there any step by step tut with this feature?
View 2 Replies
View Related
Mar 12, 2012
When I drop a profile into model space, what happens when I move it? Like if I have ten different profiles, I'd like to square them all up and organize them to fit neatly into my plan views. I just scale my border drawing and drop one of those into model space, then fill it up with profiles until it's full.
I know that I should be working in layout/paper space for this kind of stuff, but this seems easy enough.
View 3 Replies
View Related
Oct 15, 2012
I am trying to place my pipe invert labels at the actual point of the invert. When using the pipe label style composer, I have selected Anchor Point to be "Bottom Inner Diameter". Why is it that the label style still imports into the center of the pipe? No matter which anchor point I choose the label still inserts to the middle of the pipe. Is there a hidden setting that I am missing?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
View 6 Replies
View Related
Aug 28, 2012
I am simply xref'ing a profile drawing into a sheet drawing to print out. AS shown on the attached, when the profile comes into the xref I lose all the band data and the EG line does not come in as a dashed 2 line as the layer is set to. It almost looks as if the PL linetype generation is off for this line.
View 1 Replies
View Related
Nov 13, 2013
Going through the API, I can't find a class that would let me work with pipe or structure profiles.
View 4 Replies
View Related
Jul 18, 2012
I can create single alignment labels (fixed point, offset etc) that show a chainage and, by using reference text, a profile level for an associated profile.
However, using the main labels that are used for displaying chainages along an alignment (alignment chainage label group) I can also add in a reference text label for profiles here, alongside the chainage one, but there is no option to set which profile it references so it just displays '???'.
Getting the alignment labels to also display associated profile levels at every chainage point would be incredibly useful.
View 8 Replies
View Related
