I'm totally new in Civil 3D. I'm using 3D laser scanner to measure and lately draw 3D "as build" models of tunnels, bridges etc. So now I have 3D model of bridge, which is simply created with layers, 3d faces, boxes etc. - primitive ACAD 3D modelling.
Now I want to create sections on multiple stacions. How to start? Is there any step by step tut with this feature?
Is there a way of attaching connectivity data to nodes in a network topology? For example, a bridge where two roads cross might be represented by four polylines A, B, C, D with endpoints coinciding where the bridge is. How would you represent the fact that A joins C and B joins D but A does not join B/D and B does not join A/C?
View 2 Replies View RelatedI am creating construction plans sets that require 3 road profiles for the left edge, center and right edge. I would like to dynamically link the center line profile with the edge profiles.
I have created alignment offsets to obtain the existing surface at the offset location. I would like the edge profiles to have a vertical offset from the center profile. Also if I modify the center profile I want it to dynamically adjust the edge profiles.
I have made 11 successful intersections in my subdivision, but there is one that just won't work!
When I get to the point where I want to set curb return parameters, the dialog box pops up but there is nothing listed under the quadrants.
If i go ahead and try to make the intersection anyway, I get this message: "one or more of the secondary road profiles cannot be locked".
I am creating an subassembly for Tunnel in the subassembly composer.I am wondering how can i draw an ellipse with the minor and major radius data.I tried it with curve geometry but it doesn't seem to be accurate.best way to draw an ellipse with the major and minor axis parameter?
View 7 Replies View RelatedIs there a particular reason that the intersection wizard will not create the profiles if you select the horizontal alignments rather than let it create them by offset?? My EOP is not always parallel to the centerline. Why bother giving the option to pick out a name if it isn't going to work.
Civil3D 2012
Windows 7, 64 bit
We are currently designing a Highways project which includes a cut and cover Tunnel (dual 3 lane through goes underneath a signalized at grade junction). Navisworks will be used for clash detection of all disciplines. To clarify the cut and cover structure will be similar to a large box culvert. Although new to the software; the Highways team will be undertaking the Civil Highways design in Civil 3D.
My question is - what is the best Autodesk solution for the structure and associated retaining walls? Note at this stage we are unsure what all of the design components will be (e.g. pump room for drainage etc). Previously the Structures team would have produced a 2D design (however 3D modeling is a requirement).
I have seen on the internet Civil 3D and Revit Structures being used interactively (although it appeared to be incorporating bridges only). Is Civil 3D able to affectively model this structure and retaining walls within the subassembly composer? Or is the question more to do with how the Structures team will complete their design (i.e. reinforcement detailing / scheduling etc).
I've to make a tunnel on my project. I get some subassembly on web but all the tunnel subassemblies have the target point on Width or Offset Target and Slop or Elevation Target. I don't know whats happens but only my region that owns the tunnel subassembly isn't recognizing on corridor, and isn't drawing on my sections too.
View 9 Replies View RelatedAt entry / exit ramp connection,
Since frequencies of corridors are perpendicular to their respective alignments, there is gap developed in between two corridors on ramp as shown in snaps.
This is common problem in roads & highways, I know how fix the same.
But if my cross section is a Tunnel? (Cross Section- Elliptical Roof)
Civil 3D 2012, SAC
16 GB Ram 64 Bit Win7
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
I am using Land Desktop 2005 w/ Civil 2005 and how to create a profile/cross section. My scope of work is as follows: The land for survey is approximately 1,500 feet by 110 feet. The survey shall consist of cross sections every 200 feet along the length of the rectangular shaped piece of land equating to no more than 8 cross sections. I am use to just doing regular topos and boundaries.
View 9 Replies View RelatedI would like to know if it is possible to create more then one shortcut key profile in acad2011.
I need more then one acad.pgp file with different configurations that i can load via express => tools any time I want. Tried to make a copy and name it acad1.pgp, acad2.pgp, etc... but when I start up express tools, cmd editor, the option file => open does not give me the result I was hoping for. Does nothing actually, just allows me to view the shortcut configurations in the particular file. Hope that this explains my predicament
I need to create flat 2d profiles from 3d solids and was wondering what is the best way to do this? I know it can be done by plotting to a DX file but even with the hide lines on I end up with a lot of unwanted lines that need to be cleaned up which can take up too much time.
View 9 Replies View RelatedI want a list of all profiles in the drawing. How can i do?
I have a list of all alignments with:
ObjectIdCollection alignColl = civDoc.GetAlignmentIds();
But profiles don´t have the method GetProfilesIds();
or how to check if each alignment has any profiles?
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I have 2 alignemnts and 2 profiles, is there a way to to combine both alignment profiles to one profile? What I am doing is moving the centerline of a road over 10 feet, so that is why I have 2 alignments (existing CL and new CL). So what I want to show on one profile is existing centerline, existing centerline of new centerline, and proposed centerline of new centerline.
View 2 Replies View RelatedI have a question about profile table.As I indicated in this picture, I wanna to have 2 different number for each profiles but this table repeats only EG number.
View 4 Replies View RelatedI am using Civil 3D 2012. I am drawing a water line in a profile with a vertical scale of 1" = 10'. I am trying to draw lines at 45 deg angles to account for standard fittings.
Now, I tried to block a 45 deg angle and exaggerate the y scale, but for some reason this does not work well mathematically. Is there a way to draw lies at a certain slope, or at a certain angle from another line, while taking into consideration the scale exaggeration?
I have found recently that surfaces that are sampled in profile views are not synchronized when the drawing is opened. This is incredibly frustrating when I'm just opening a file to plot a new copy. If I forget to resynchronize the drawing, the sampled profiles will not plot.
Is there a system variable I might try to toggle?
is there a way to create a few profiles say at 0.5, 1.0, 1.5 and 2.0m vertically above the profile of the ground? without creating the surface again and change the elevation 4 times and making 4 data reference. using those lines for design guides for minimum fill requirements when doing FG profiles. before i just copy, then explode then move the original profile as a polyline. i actually have to explode the polyline after because it's laggy to zoom in the profile for some reason. once lines it's ok. but then again it's not dynamic. i changed my alignment and then those line stayed then have to do it all over again. this maybe a good feature to have next version.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
Our firm has finally decided to leave LDC 2009 behind and moving to C3D 2012.I would like to ask a few questions about the way plan and profiles are created with C3D.
In LDC, we would create a full profile that included everything in it, that is proposed and existing centerline elevations and left and right top of curb elevations. Then on the sheet layouts, we would make many viewports that showed the proposed and existing sets, that is centers, lefts and rights. (medians in the example attached)
I've been watching many online videos on how to sample center, left and right and how to create a proposed center line but I can't figure out how to make a proposed left and right profile so that I can control drainage into existing inlets.
I have a couple of files with DS surfaces that I cut profiles with and all was fine until today. the surface ref is in the drawing but does not display. If I zoom to it goes to a location not related to the site but there is no display of the surface (all layers and style set to display) this is what view props shows. notice the odd serial number for the data source. through tools space I deleted the refs and re-refed and sampled, but when I close and go back its gone again.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
i need to label the same pipe in 2 different profiles
View 2 Replies View RelatedI'm working on profiles for the first time - built my pipe network.
I have these dotted ghost lines - what they are and what I might have "on" that is causing them?
Noticed that after the last update many profile settings like snap aperatures, OSNAPS, and data shortcut working files aren't being remembered? It has only happened to a couple people, but they are having the exact same issues.
I wish it was simple as the shortcut being reset or pathed to the wrong profile, but it's not the case.
I've heard it said that it's possible to make two separate layout profiles dynamically dependent. For example, making a driveway centerline profile dependent on the roadway centerline profile it's connected to. The idea is that if you revise the roadway centerline profile, up or down, that the driveway profile will automatically go up or down with it.
Is this true? I didn't readily see anything in the profiles area of the docs or the tutorials.
If I have a drawing scale set up as 1"=30' and I created some profiles at that scale, and then I need to create a profile at 1"=40' horiz and 1"=4' vert., what is the best way to do that? I believe in the past I tried changing the drawing scale under settings to 1"=40' one time and all of the profiles in the drawing changed to that same scale even though they were drawn at 1"=30', which I want to stay that way.
I think I can leave the drawing settings to 1"=30 and then just assign the scale in the viewport to 1"=40', but then all of the text sizes in the profile view style will adjust according to the scale I use, which will either increase or decrease according to the scale I pick. I would like to keep the profile view style consistent no matter what scale I pick.
How do you create and save ICC profiles using Photoshop?
View 2 Replies View RelatedI was having an issue in Corel VideoStudio Pro x4. I could not create custom video output files (profiles; see attached image). So I ran VideoStudio as admin. No luck. I reinstalled it as admin and ran it as admin. No luck. I tried manually changing the files corresponding to the default video profiles with notepad. Initially I was denied access. Through a rigorous method of trying to figure out why I was denied access to changing the files, I found out that I was denied access to even renaming the Corel folder (with nothing running corel programs).
I downloaded a better version of task manager to figure out what must be running in the background. Nothing was running anything located in the Corel folder. I still couldn't even rename the corel folder on an admin account. I booted in safe mode (and then I could change the folder name, etc), and changed one of the default video output profiles. The changes stuck even across computer reboots, but my changes were not recognized in VideoStudio (no clue why; I changed the profiles found in the profile subfolder of Corel).
So, I figured what with the sale going on, I might as well upgrade to Pro x6. Bought it. Uninstalled VideoStudio x4 completely. Deleted the Corel folder entirely from Program Files (x86). Installed VideoStudio x6. Got it launched as admin, attempted to create a profile, and got the same error. Trying to rechange the Corel folder results in the same denial of permissions that I used to have, even after running it as admin, disabling UAC, and changing the security permissions on the folder itself.
How to create a custom profile. Attached is example errors. Need tocreate a profile that is the exact same as the WMV HD 720 30p default profile, only with better sound (24 bits instead of 16 bits and/or 48/96KHz instead of 41KHz), and then direct me to which folder I should place said filed in (as changing stuff in the profile folder didn't seem to make much difference).
CLICK IMAGE TO ENLARGE
I don't know how to create camera profiles in Lr though I've been using it for years.
View 4 Replies View RelatedExisting surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
How do you get pipes to show on the profiles when there is a side pipe from a different alignment that enters an inlet?
I went to Profile View Properties / Pipe Networks and checked the side pipe to draw and changed the style overide to crossing, but nothing shows in the profile.
2013 Civil 3D