AutoCAD Civil 3D :: 2 Different Number For Each Profiles

Jul 17, 2013

I have a question about profile table.As I indicated in this picture, I wanna to have 2 different number for each profiles but this table repeats only EG number.

View 4 Replies


AutoCAD Civil 3D :: 2013 - Dynamic Surface Profiles Acting As Static Profiles

Nov 14, 2012

I am having some issues with surface profiles on a dreffed alignment no updating dynamically.

Currently it requires me to set them to static, then back to dynamic and they update.

I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.

Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)

View 1 Replies View Related

AutoCAD Civil 3D :: How To Get A List Of All Profiles

Jun 7, 2013

I want a list of all profiles in the drawing. How can i do?

I have a list of all alignments with:

ObjectIdCollection alignColl = civDoc.GetAlignmentIds();
But profiles don´t have the method GetProfilesIds();

or how to check if each alignment has any profiles?

Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit

View 2 Replies View Related

AutoCAD Civil 3D :: Combination Of 2 Profiles?

Dec 12, 2013

I have 2 alignemnts and 2 profiles, is there a way to to combine both alignment profiles to one profile?  What I am doing is moving the centerline of a road over 10 feet, so that is why I have 2 alignments (existing CL and new CL).  So what I want to show on one profile is existing centerline, existing centerline of new centerline, and proposed centerline of new centerline.

View 2 Replies View Related

AutoCAD Civil 3D :: Slopes And Angles In Profiles

Aug 31, 2012

I am using Civil 3D 2012. I am drawing a water line in a profile with a vertical scale of 1" = 10'. I am trying to draw lines at 45 deg angles to account for standard fittings.

Now, I tried to block a 45 deg angle and exaggerate the y scale, but for some reason this does not work well mathematically. Is there a way to draw lies at a certain slope, or at a certain angle from another line, while taking into consideration the scale exaggeration?

View 1 Replies View Related

AutoCAD Civil 3D :: Profiles Not Synchronizing Upon Open

Oct 19, 2012

I have found recently that surfaces that are sampled in profile views are not synchronized when the drawing is opened. This is incredibly frustrating when I'm just opening a file to plot a new copy. If I forget to resynchronize the drawing, the sampled profiles will not plot.

Is there a system variable I might try to toggle?

View 9 Replies View Related

AutoCAD Civil 3D :: Vertically Offsetted Profiles From OG?

Sep 26, 2012

is there a way to create a few profiles say at 0.5, 1.0, 1.5 and 2.0m vertically above the profile of the ground? without creating the surface again and change the elevation 4 times and making 4 data reference. using those lines for design guides for minimum fill requirements when doing FG profiles. before i just copy, then explode then move the original profile as a polyline. i actually have to explode the polyline after because it's laggy to zoom in the profile for some reason. once lines it's ok. but then again it's not dynamic. i changed my alignment and then those line stayed then have to do it all over again. this maybe a good feature to have next version.

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 9 Replies View Related

AutoCAD Civil 3D :: Layout Profiles Left And Right

Jun 24, 2011

Our firm has finally decided to leave LDC 2009 behind and moving to C3D 2012.I would like to ask a few questions about the way plan and profiles are created with C3D.

In LDC, we would create a full profile that included everything in it, that is proposed and existing centerline elevations and left and right top of curb elevations. Then on the sheet layouts, we would make many viewports that showed the proposed and existing sets, that is centers, lefts and rights. (medians in the example attached)

I've been watching many online videos on how to sample center, left and right and how to create a proposed center line but I can't figure out how to make a proposed left and right profile so that I can control drainage into existing inlets.

View 8 Replies View Related

AutoCAD Civil 3D :: Surface Profiles Keep Disappearing?

Jun 13, 2013

I have a couple of files with DS surfaces that I cut profiles with and all was fine until today. the surface ref is in the drawing but does not display. If I zoom to it goes to a location not related to the site but there is no display of the surface (all layers and style set to display) this is what view props shows. notice the odd serial number for the data source. through tools space I deleted the refs and re-refed and sampled, but when I close and go back its gone again.

Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram

View 9 Replies View Related

AutoCAD Civil 3D :: Label Same Pipe 2 Profiles?

Jul 15, 2013

i need to label the same pipe in 2 different profiles

View 2 Replies View Related

AutoCAD Civil 3D :: Ghost Lines In Profiles?

Aug 6, 2013

I'm working on profiles for the first time - built my pipe network.

I have these dotted ghost lines - what they are and what I might have "on" that is causing them?

View 6 Replies View Related

AutoCAD Civil 3D :: Profiles Not Saving All Settings?

Dec 16, 2011

Noticed that after the last update many profile settings like snap aperatures, OSNAPS, and data shortcut working files aren't being remembered?  It has only happened to a couple people, but they are having the exact same issues.

I wish it was simple as the shortcut being reset or pathed to the wrong profile, but it's not the case.

View 3 Replies View Related

AutoCAD Civil 3D :: Dynamically Dependent Profiles

Apr 11, 2013

I've heard it said that it's possible to make two separate layout profiles dynamically dependent.  For example, making a driveway centerline profile dependent on the roadway centerline profile it's connected to.  The idea is that if you revise the roadway centerline profile, up or down, that the driveway profile will automatically go up or down with it.

Is this true?  I didn't readily see anything in the profiles area of the docs or the tutorials.

View 5 Replies View Related

AutoCAD Civil 3D :: Assigning Different Scale For Profiles

May 8, 2013

If I have a drawing scale set up as 1"=30' and I created some profiles at that scale, and then I need to create a profile at 1"=40' horiz and 1"=4' vert., what is the best way to do that? I believe in the past I tried changing the drawing scale under settings to 1"=40' one time and all of the profiles in the drawing changed to that same scale even though they were drawn at 1"=30', which I want to stay that way.

I think I can leave the drawing settings to 1"=30 and then just assign the scale in the viewport to 1"=40', but then all of the text sizes in the profile view style will adjust according to the scale I use, which will either increase or decrease according to the scale I pick. I would like to keep the profile view style consistent no matter what scale I pick.

View 5 Replies View Related

AutoCAD Civil 3D :: Surface Profiles Not Showing In XRef

Nov 2, 2012

Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.

Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
Nvidia Quadro 600

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Junctions To Show In Profiles

Jun 13, 2012

How do you get pipes to show on the profiles when there is a side pipe from a different alignment that enters an inlet?

I went to Profile View Properties / Pipe Networks and checked the side pipe to draw and changed the style overide to crossing, but nothing shows in the profile.

2013 Civil 3D

View 4 Replies View Related

AutoCAD Civil 3D :: Three Profiles On A Plan And Profile Sheet

Aug 27, 2012

What is the most current Civil 3D workflow recommendation from Autodesk, for people who are required to show and label three profiles: centerline, left and right gutter flowlines; on a plan and profile sheet for drainage review? The gutter flow line profiles are required to show their true longitudinal grade.

Just looking for the main salient steps at the conceptual level.

View 4 Replies View Related

AutoCAD Civil 3D :: Straightening Pressure Pipe Profiles?

Apr 24, 2012

I'm slowly getting familiar with the new pressure pipe tools. So far I like the layout compass but I'm finding the rest to be rather cumbersome to work with.

One problem I have is how to straighten portions of a pipe in profile after fitting it to a surface profile. Each pipe ends up segmented according to it's cut length property. Typically after fitting it to a surface profile we want to straighten the pipe between critical points along the profile. I don't see any way to do this aside from dragging each segment. Is there a way to remove, add or adjust the length of individual segments?

I don't see any other than the videos provided in the new features catalog.

Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB

View 1 Replies View Related

AutoCAD Civil 3D :: Getting Profiles Into Plan And Profile Sheets

Jun 17, 2013

So I had to jump into the middle of a project. The Viewframes were already created but when I go to the plan and profile sheets for the viewframes the profile is not showing and I'm not sure how to choose the correct profile and display it in the corresponding plan and profile sheet.

View 8 Replies View Related

AutoCAD Civil 3D :: How To Create Profiles Through Bridge Or Tunnel

Jan 21, 2013

I'm totally new in Civil 3D. I'm using 3D laser scanner to measure and lately draw 3D "as build" models of tunnels, bridges etc. So now I have 3D model of bridge, which is simply created with layers, 3d faces, boxes etc. - primitive ACAD 3D modelling.

Now I want to create sections on multiple stacions. How to start? Is there any step by step tut with this feature?

View 2 Replies View Related

AutoCAD Civil 3D :: Moving Profiles In Model Space

Mar 12, 2012

When I drop a profile into model space, what happens when I move it?  Like if I have ten different profiles, I'd like to square them all up and organize them to fit neatly into my plan views.  I just scale my border drawing and drop one of those into model space, then fill it up with profiles until it's full. 

I know that I should be working in layout/paper space for this kind of stuff, but this seems easy enough. 

View 3 Replies View Related

AutoCAD Civil 3D :: Pipe Invert Labels In Profiles?

Oct 15, 2012

I am trying to place my pipe invert labels at the actual point of the invert. When using the pipe label style composer, I have selected Anchor Point to be "Bottom Inner Diameter". Why is it that the label style still imports into the center of the pipe? No matter which anchor point I choose the label still inserts to the middle of the pipe. Is there a hidden setting that I am missing?

Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
Civil 3D 2013

View 6 Replies View Related

AutoCAD Civil 3D :: Xref'd Profiles In Plan View?

Aug 28, 2012

I am simply xref'ing a profile drawing into a sheet drawing to print out.  AS shown on the attached, when the profile comes into the xref I lose all the band data and the EG line does not come in as a dashed 2 line as the layer is set to.  It almost looks as if the PL linetype generation is off for this line.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Work With Structure And Pipe Profiles

Nov 13, 2013

Going through the API, I can't find a class that would let me work with pipe or structure profiles.

View 4 Replies View Related

AutoCAD Civil 3D :: Reference Text Label For Profiles

Jul 18, 2012

I can create single alignment labels (fixed point, offset etc) that show a chainage and, by using reference text, a profile level for an associated profile.

However, using the main labels that are used for displaying chainages along an alignment (alignment chainage label group) I can also add in a reference text label for profiles here, alongside the chainage one, but there is no option to set which profile it references so it just displays '???'.

Getting the alignment labels to also display associated profile levels at every chainage point would be incredibly useful.

View 8 Replies View Related

AutoCAD Civil 3D :: Labeling Profiles From Data References

Nov 17, 2013

We recently started using Civil3d 2013. We made a huge jump from LDD 2008. We have profiles designed and data short cuts are created. We have existing and proposed. 

Now i've created a reference and brought them into another drawing. First I tried to set up the color and linetype for each profile. When I do this. Both the existing and proposed become the same color and linetype.I do not see how to select the existing from the proposed and set the color and linetype.

Next I select the proposed profile and right click and select Edit Labels. I start to create the PVI labels. When I do this the PVI's for the existing profile get labeled. I want the proposed profile labeled. Not the existing.

View 3 Replies View Related

AutoCAD Civil 3D :: Profiles Show Up Under Multiple Alignments

Jul 24, 2012

2012 SP2

I'm having a problem with profile shortcuts showing up under multiple alignments. I have 16-alignments and profiles in their own drawings. I didn't create the shortcuts right away as I was still figuring out how I wanted the project dir structure. When I had that solved, I started creating the shortcuts. When I checked them, some of the alignments had up to 6-profiles from other alignments listed under them. One alignment had 3-profiles, and not one of them was for the alignment.

I removed all the profile shortcuts and started bringing them in again. Same problem. This was after shutting C3D down, cleaning up the tmp files and restarting.

There are shortcuts for 36 other alignments, and none of them appear to be affected, only these last 16. Validate Data Shorcuts doesn't do anything.

View 1 Replies View Related

AutoCAD Civil 3D :: Delete Multiple Profiles At The Same Time?

Mar 15, 2011

there is a way to delete multiple profiles at the same time?

Currently, I have to go through the prospector and delete them one at a time. I have an alignment with many profiles (various walls along the length of the road), but have split the drawing up into several files... How can I delete all the profiles at once?

View 4 Replies View Related

AutoCAD Civil 3D :: Copy Profiles From One Alignment To Another In Same Site?

Apr 26, 2012

i have a preliminary alignment used to create some proposed profiles now we have pin point the location of the correct alignment and i want to copy serveal profiles from the preliminary aligment to the new alignment all at once instead of one at a time with superimpose.

View 4 Replies View Related

AutoCAD Civil 3D :: Lost Profiles On One Profile View?

Mar 7, 2013

I have a drawing with 13 profile views.  12 of them are working fine.

One profile view has 'lost' all its profiles.  It should have one surface profile, and 6 superimposed profiles that are designed by layout in other profile views.

The profiles still show up in prospector and in the profile view properties, but you can't see them in the drawing.  The profile view is on the same style as all the others, and the profiles are on multiple styles, but the same as their source profile and others in the drawing that are working fine.

I edited the alignment a little to see if that would 'jog the memory', then I turned all layers on and thawed.  Still nothing.  Then I superimposed a couple more profiles to see if they would show up.  Again, they show in the properties, but do not plot in profile view.

I have a separate drawing with this alignment & profiles shortcut into it, and I'm seeing exactly the same behaviour there too.

View 8 Replies View Related

AutoCAD Civil 3D :: Alignments And Profiles Lost During Publish

Jan 30, 2013

I have two alignments with profiles, that when I publish either from the layouts, or from SSM, don't show up in the pdf. This includes the labels. If I do a plot of the individual sheets, they show up fine. There are other alignments using the same styles that publish just fine.

I had to repair the shortcuts to these two alignments. Not sure if that would have anything to do with it. Can't see how, since they plot fine. What's maddening is that I published a set of plans before repairing the shortcuts, and they came out fine.

I restored a previous version which required the shortcut repair, and it does the same thing.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved