AutoCAD Civil 3D :: Lost Profiles On One Profile View?

Mar 7, 2013

I have a drawing with 13 profile views.  12 of them are working fine.

One profile view has 'lost' all its profiles.  It should have one surface profile, and 6 superimposed profiles that are designed by layout in other profile views.

The profiles still show up in prospector and in the profile view properties, but you can't see them in the drawing.  The profile view is on the same style as all the others, and the profiles are on multiple styles, but the same as their source profile and others in the drawing that are working fine.

I edited the alignment a little to see if that would 'jog the memory', then I turned all layers on and thawed.  Still nothing.  Then I superimposed a couple more profiles to see if they would show up.  Again, they show in the properties, but do not plot in profile view.

I have a separate drawing with this alignment & profiles shortcut into it, and I'm seeing exactly the same behaviour there too.

View 8 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Editing Profile Style Of Single Profile Instead All Of Profiles?

Mar 5, 2012

I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?

View 2 Replies View Related

AutoCAD Civil 3D :: Alignments And Profiles Lost During Publish

Jan 30, 2013

I have two alignments with profiles, that when I publish either from the layouts, or from SSM, don't show up in the pdf. This includes the labels. If I do a plot of the individual sheets, they show up fine. There are other alignments using the same styles that publish just fine.

I had to repair the shortcuts to these two alignments. Not sure if that would have anything to do with it. Can't see how, since they plot fine. What's maddening is that I published a set of plans before repairing the shortcuts, and they came out fine.

I restored a previous version which required the shortcut repair, and it does the same thing.

View 2 Replies View Related

AutoCAD Civil 3D :: Moving Profile View Labels With The Profile View?

Jul 20, 2012

I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself.  ?

Civil 3D 2012

View 2 Replies View Related

AutoCAD Civil 3D :: Three Profiles On A Plan And Profile Sheet

Aug 27, 2012

What is the most current Civil 3D workflow recommendation from Autodesk, for people who are required to show and label three profiles: centerline, left and right gutter flowlines; on a plan and profile sheet for drainage review? The gutter flow line profiles are required to show their true longitudinal grade.

Just looking for the main salient steps at the conceptual level.

View 4 Replies View Related

AutoCAD Civil 3D :: Getting Profiles Into Plan And Profile Sheets

Jun 17, 2013

So I had to jump into the middle of a project. The Viewframes were already created but when I go to the plan and profile sheets for the viewframes the profile is not showing and I'm not sure how to choose the correct profile and display it in the corresponding plan and profile sheet.

View 8 Replies View Related

AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View

Nov 4, 2013

I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?

View 9 Replies View Related

AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command

Feb 28, 2011

I try to make curb return profile without profile view like a intersect command.

I was make curb return alignment but I can not find profile command without profile view.

View 6 Replies View Related

AutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile

Nov 22, 2013

I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.

Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit

View 7 Replies View Related

AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update

Jul 24, 2012

I have yet to produce a profile. I created a polyline and turned it into an alignment.

Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.

Is the sample5 an alignment that sits on the surface? how come there is still no profile?

View 3 Replies View Related

AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View

Nov 28, 2012

Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir  shoreline. 

1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing. 

2.the points having higher elevation are the  top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.

3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir. 

View 2 Replies View Related

AutoCAD Civil 3D :: Multiple Profiles On Plan And Profile Sheet?

Aug 5, 2013

How can I show two proposed alignments in one plan and profile sheet?

View 3 Replies View Related

AutoCAD Civil 3D :: Edit Profile Without Having It On Profile View?

Jul 31, 2013

A tabular data sheet for profiles could be very interesting.

Civil 3D (2013)

View 9 Replies View Related

AutoCAD Civil 3D :: Shifted Profile Within Profile View?

Jan 22, 2013

I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport.  The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into.  But when I switch from model space to paper space in my layout sheet (the file the profile dwg  is referenced into) the profile moves to the wrong station within my profile view in paper space.

The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.

The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.

View 2 Replies View Related

AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View?

Jul 24, 2012

I am a C3D newbie who used  ground survey points  (Serrano_EG_surface)  that  generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then  into individual CL alignments. The first alignment ,which has its left and right offsets   do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.

1. Are the ground survey points good enough  so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a  preliminary drawing for environmental permitting. ?

2. When I check the object browser,  the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.

3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).

4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.

View 2 Replies View Related

AutoCAD Civil 3D :: Mark Items In Alignment View To Display In Profile View?

Dec 20, 2012

I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view.  I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items.  The marker I would like to use will be something like the vertical style grade break markers.

Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?

View 9 Replies View Related

AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View

Nov 28, 2012

1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?

2. How can I best come up with the right volume to fill.  

3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet) 

4. How to I render a rock fill in this cave-in.  

The attached aerial image , has survey or cogo points  that are imported to surface, to become surface points. . So I wanted to create a surface profile  below  and an outline of  fill  above it.  Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment. 

But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not)  is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area. 

The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1

View 5 Replies View Related

AutoCAD Civil 3D :: Working Back And Forth From Plan View And Profile View

Jan 18, 2013

I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?

View 9 Replies View Related

AutoCAD Civil 3D :: Add An Object From A Profile View To A Plan View

May 29, 2013

Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.

View 9 Replies View Related

AutoCAD Civil 3D :: Xref'd Profiles In Plan View?

Aug 28, 2012

I am simply xref'ing a profile drawing into a sheet drawing to print out.  AS shown on the attached, when the profile comes into the xref I lose all the band data and the EG line does not come in as a dashed 2 line as the layer is set to.  It almost looks as if the PL linetype generation is off for this line.

View 1 Replies View Related

AutoCAD Civil 3D :: Profile View Of Alignment In Civil D & Google Earth Varies

Dec 25, 2012

I imported Google earth surface (at eye alt 600m) to civil 3d 2012 and created an alignment of length 181m.

When I exported same alignment to Google earth , it showed the length as 190m ( the difference increases with increase in length of alignment) And also the profile view of the alignment in the Civil D & Google earth varies.

View 4 Replies View Related

AutoCAD Civil 3D :: Profile View PI'S

May 24, 2012

C3D 2012..Have a profile I'd like to have the PC, PT shown. (No Problem)But in doing so it also puts the PI'S of each of these curves in the profile view.

Is there a way to turn off the PI's and leave the PC's and PT's on?

View 6 Replies View Related

AutoCAD Civil 3D :: Set Profile View Stations?

Nov 6, 2012

I am using the profile sample VB.net program to create an alignment, profile view and profile.  The profile view defaults to start at station -0+25.  I want to set the Profile View starting station based on the "Align_strt_sta" value I have defined based on the Alignment Stationing.  I have tried the .StationStart() shown below, but I just get a unhandled exception. 

' Create the profile view and add it to the alignment's ' collection of profile views. If oProfileView Is Nothing Then id = ProfileView.Create(m_CivilDoc, Prof_View_Name, PROFILEVIEW_BANDSET_STYLE_NAME, Align_Name, pviewposition) oProfileView = pviewTransaction.GetObject(id, OpenMode.ForWrite) End If 'oProfileView.StationStart() = Align_Strt_Sta oProfileView.Description = "Profile view of alignment '" & m_SampleAlignment.Name & "'" oProfileView.StyleName = PROFILE_VIEW_STYLE_NAME

View 1 Replies View Related

AutoCAD Civil 3D :: Hatching In Profile View

Nov 12, 2013

I discovered a weird thing that seems like a bug...I tried to hatch manually while in profile view (couldn't figure out how to do what I want with the profile view hatching options) and it seems that if I try to make one hatch (by picking internal points) that includes multiple structure profiles on the same profile view, the first structure profile for that profile view works as a hatch boundary, but subsequent structure profiles are basically ignored if I keep trying to pick internal points to make a composite hatch.

I assume it's because of this same bug that I can't create a hatch by choosing boundary objects and using two structure profiles in the same profile view as boundary objects.

how to hatch using the profile view hatching and to use a pipe network as a boundary, that would also be useful.

if I hatch by picking internal points, and pick one area with a structure profile as part of the boundary, and then I pick a similar area in a different profile view, everything works fine...it's just the second (and though I don't have more than 2 structures per profile view in my drawing, I would assume any subsequent) structure profiles that I try to use as hatch boundaries that AutoCAD is basically ignoring.

View 7 Replies View Related

AutoCAD Civil 3D :: Profile View Watermain

Aug 13, 2013

When inserting a piece of my watermain into my profile view, the watermain is not stopping at the edge of the first profile view. Instead it just continues out of the view. See attachment. When I change the style of the pipe to just centre line I do not have this issue. It seems the hatching is the issue.

View 1 Replies View Related

AutoCAD Civil 3D :: Measurements On Profile View?

May 7, 2013

I want to have the ability of take measures on my profile view. 

The tool would consider the vertical exaggeration and give me the right distance and slope .

Civil 3D (2013)

View 3 Replies View Related

AutoCAD Civil 3D :: Profile View / Band

May 22, 2013

How to upload Civil 3d Sample profile with full band 

View 1 Replies View Related

AutoCAD Civil 3D :: Pipes In Profile View?

Apr 5, 2013

Is there a way (and I'm just missing it) to have a pipe from a pipe network only be shown 'cut-off', with the typical 'cut-off' shown on the profile view?  see the screen shot of sketch of what I'm referring to. 

View 2 Replies View Related

AutoCAD Civil 3D :: Structure In Profile View

May 5, 2013

how can i set the smub of a structure at the crown of a pipe not at the invert?

View 3 Replies View Related

AutoCAD Civil 3D :: Profile View Bands

Jan 11, 2014

I'm having difficulty adding bands to a profile view in Civil 3D 2013 in that the bands appear to be come corrupt in not showing the data (the check box to show is unselected, even if I set it to show) and when I go into the UI and turn the bands to show the bands don't show the information correctly. 

 Alignment align = profileView.AlignmentId.GetObject(OpenMode.ForRead) as Alignment;
Profile prof = profObjId.GetObject(OpenMode.ForRead) as Profile;
if (!profileView.IsWriteEnabled) profileView.UpgradeOpen();
profileView.StyleId = profViewStyleObjId;ProfileViewBandItemCollection bottomBandItems =

[Code] ..........

View 7 Replies View Related

AutoCAD Civil 3D :: Profile View - Bands

Oct 21, 2013

I've been trying to set up a profile view to look like the Section i've attached (Done Manually) but having great difficulty with the bands.

Any detailed long-sections of a pipe network done with C3D that i could work off.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved