AutoCAD .NET :: Sheet Set Components Error On Win 7 64-bit Machine
Jul 25, 2011
I have one user on a Win 7 64-bit machine running 64-bit Autocad / ACA. I have written a routine that references the ACSMCOMPONENT library and I get an error that says the system can't find that library file. I have attached a screen shot for review.
All of my other machine are Windows XP and the .DLL that I wrote is located locally withe the ACSMCOMPONENT.dll in the same directory.
I have done some research and have concluded that I need a 64-bit version of the ACSMCOMPONENT.dll and I don't know where to get it or how to create it if possible.
View 7 Replies
ADVERTISEMENT
Jun 22, 2009
I had to rebot my computer the other day then had put back CS3 on to my computer.When CS3 starts to install its self it comes up with:-
"Currently putting in shared components"then it comes up with:-"Succesfully installed 1 Component: Shared Compents"
Then it say's"Error: 2 Component(s) Adobe Photoshop CS3 Component Install Failed Shared Compents Component Install Failed.
View 4 Replies
View Related
Sep 17, 2012
I'm getting an error message that I don’t fully understand when using an adaptive component. "There is only one component in this repeater" I am trying to create a undulating ceiling and attach an adaptive "Rafter" to follow the form. I can occasionally get it to work but on occasion I receive the error message. I can send you the file if you like, I’m pretty sure it’s a “User Issue”!RAC 2013
I have been told that it is to do with the direction that I draw the curves but I would like a more indepth explanation of this error...
The other issue I'm having may have to do with the placement of the adaptive component on the node plane, depending on where I place the component it will change the orientation if the rafter...
View 2 Replies
View Related
Aug 4, 2012
Got a new computer. Copied and upgraded Photoshop CS2 to CS5. I would like to give the old computer to a family member or friend. Will they be able to use the CS2 on the old machine? (an iMac 10.6) or is that the end of that CS2?
View 32 Replies
View Related
Jul 23, 2013
Just created a 2nd drawing sheet in my IDW, and when i place a revision table it is missing most of the data that is shown on sheet 1. All i get are the description column entries, nothing else.
View 9 Replies
View Related
May 11, 2012
I just changed my startup setting from 0 to 2 because I do not ever need a blank "Drawing 1" to work off of. Now I am wondering if that screwed something up because when I boot up AutoCAD and immediately try to open a Sheet Set, I receive the attached messages and then AutoCAD crashes. Is this a bug that needs to be fixed?
View 4 Replies
View Related
Dec 28, 2012
I get an error when I try to eTransmit from the sheet set manager.An error occurred attempting to create the transmittal. Please make sure the target location is writable and that the target disk has sufficient space.
View 7 Replies
View Related
Mar 1, 2012
I've got an error that pops up when I'm trying to create cross sections sheets in Civil3D 2012. The error is "Unable to clone layout into current drawing."
View 4 Replies
View Related
May 3, 2013
Inventor Professional 2012.like many companies we export our parts lists (in our case, .csv) for our MRP system. I borrowed and modified Curtis' ilogic code that I found in previous posts on these forums to fit our needs. The only thing I'm getting hung up on is the sheet in which the parts list is found.
Right now the code is pointing only to sheet 1 to find the parts list. Unfortunately some of our assembly drawings have many sheets and the parts list can be on any of them. So whenever I run the rule in a drawing that doesn't have the parts list on sheet 1 I get an error. Is there some way for Inventor to search all the sheets? or at the least search on the active sheet?
'name for .csv file
name = iProperties.Value("Project", "Part Number")
'path for .csv file
folderName = "L:CadLink"
Dim oDoc As Inventor.DrawingDocument
oDoc = ThisDoc.Document
[code]....
View 1 Replies
View Related
Mar 11, 2013
Basically a 2.5" id tube with a .06 wall thickness - 16ga exhaust tubing. Once I finaly got the drawing right, I cannot rip the part. The part has both ends cut. If one of the ends is left un cut I can create a sketch and put a point where I want to rip, and successully rip the part. If both ends has a cut end has a cut, there is a RIP error. How to overcome this headache? I am trying to make a template which If i can rip the part, I will be able to do so.
using autocad inventor
View 2 Replies
View Related
Apr 5, 2012
I have had an issue where my text field shows up as "####" even though the the value is still showing up in the custom properties menu. I've tried updating the field and re-inserting the field and it keeps showing up as "####"
View 1 Replies
View Related
Jan 20, 2012
I have made all my sheets through the Plan Production wizards. When I go to sheet set manager, and select publish to pdf, i get an error saying the following:
ERROR: Layout not found..By using one tab per drawing, seems to publish ok. But we want multiple tabs per drawing, so not really any use to us.
View 2 Replies
View Related
Jun 30, 2009
I have run into a problem with AutoCAD 2010 while trying to copy paste within 2 different drawings. Copying blocks from 1 sheet to another causes this error message "_pasteclip *Invalid*" It wont let me copy in the blocks. Sometimes after that happens all i need to do is a regen command and it fixes it. Other times im forced to switch to model space and then back to paperspace which then lets me paste the objects. This is not isolated to my computer, it happens on other computers here in the office.
View 2 Replies
View Related
Jun 18, 2012
I'm having an error with Ilogic parameters.I just wanna change the border and the title blocks with Ilogic. This should be simple. Isn't this?
View 2 Replies
View Related
Nov 9, 2013
I created a solid, shelled it, and then converted to sheet metal. I am now trying to indentify the bends but I am getting the error: Bend 1: Could not build this Bend; No matching faces found.
View 5 Replies
View Related
Oct 2, 2013
I'm trying to breath life into an old Sheet Metal template.It starts with the Non-Empty VBA warning.From there, "Run-time error '13': type mismatch
Debugging, here's my screen (attached). I don't know enough about VB to know where there's a problem.
View 2 Replies
View Related
Feb 1, 2012
I have a part that is derived from a surface skeleton ipt. The derived surface is thickened and then some holes are added. Then, when I try to add a flange, it gives me the error "Sheet metal features are not supported in multi solid body parts". My part is a sheet metal part and single body.
INV 2013
View 4 Replies
View Related
Oct 17, 2012
When I print a single 4x5 image on an 8.5 x 11 sheet of paper, the entire sheet, less the eighth inch margins, receives an almost invisible layer of color. Where is the dialog box generating the instruction to print this background and how do I disable it? Both Elements 3 and 6 used on the same printer, an Epson 2200, would simply print the image.
View 3 Replies
View Related
Jan 3, 2013
Is there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
View 4 Replies
View Related
Sep 20, 2013
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies
View Related
Apr 2, 2013
I am having a problem opening older sheet sets from AutoCAD 2014.
I can select the .dst file, but when it "opens" I onlly have the icon in the seet set manager and nothing else, it is entirely blank.
I made a new sheet set, but now older versions of AutoCAD cannot read that one.
View 5 Replies
View Related
Sep 12, 2013
A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies
View Related
Sep 6, 2012
I am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies
View Related
Apr 16, 2012
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
View 1 Replies
View Related
Mar 28, 2013
I am using AutoCAD 2013 and I working on a project of approxamitely 80 pages and I have a Sheet Set Manager set up.There are about 40 pages that have text saying Continuation on Sheet XX of YY. I managed to use a field for the total count (YY) however I need to link the XX to the another drawing. I have researched and failed miserably.
View 9 Replies
View Related
Oct 29, 2012
I'm trying to set up a title block template that will be used between several different sheet sets. I have entered the custom properties, then when I go to the title block and try to insert the fields with current sheet set custom the drop down box is empty and then when I try to type in the custom property name the link still does not function. Is there some trick that I'm missing, or is this function broken on AutoCad 2013?
View 6 Replies
View Related
Aug 5, 2013
I am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
View 1 Replies
View Related
Nov 6, 2012
How people deal with multiple revisions of one sheet with sheet set manager, basically I want the cover sheet of drawings to have a list of drawings including the revision letter and revision date and on each individual sheet keep track of historical revisions
There is the current sheet revision and date fields.Does everyone usually just update these and manually keep track of historical revisions else where in there title block?
View 6 Replies
View Related
Feb 10, 2013
I'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
View 7 Replies
View Related
Jun 15, 2009
When I publish my sheet to PDF, dimensions of my sheet is broken.
View 9 Replies
View Related
Mar 2, 2010
Is there anyway to get a timestamp onto the idw. I have been using the one that could be down loaded that Steve Krause had made but that one doesn't work on a 64 bit machine.
View 5 Replies
View Related
