When I print a single 4x5 image on an 8.5 x 11 sheet of paper, the entire sheet, less the eighth inch margins, receives an almost invisible layer of color. Where is the dialog box generating the instruction to print this background and how do I disable it? Both Elements 3 and 6 used on the same printer, an Epson 2200, would simply print the image.
View 3 RepliesI am using the template from labelbythesheet.com to make stickers. When I print a sample on a plain sheet of paper everything comes out perfectly centered. When I make the circle ring invisible and print on the actual sticker paper the entire sheet is off and the stickers are unusable. I am using the correct template for the stickers purchased as I got it from their own website.
View 4 Replies View RelatedI am trying to follow this tutorial ...
[URL].........
Under #2 ... I am assuming the author means to draw with the Rounded Rectangle in Path mode ... am I assuming correct? I think it is suppose to be set to Path b/c it's the only way the Blend Mode reads "Pass Through"
this tuts steps aren't really numbered well but also under step two where the "BG" is filled with black the resulting shape is suppose to look like this :
But mine looks like this :
Notice how the left side has a lighter grey color and the one from the tut above is clear?
Also under step #2 ... where it comes to the part where I am to color the resulting shape with a yellow gradient this is what happens to me :
the entire canvas becomes colored ... ? Here are my Layers.
I select the "BG" layer to apply the gradient.
Here is the Layers panel from the tut which is confusing to me b/c the only difference I see is that the tuts panel has the down arrow and folder of the top layer/the "Body" layer seems to be greyed out... and the tut says something like : Activate the "BG" layer and cancel the mask view. Well, how to go about canceling the mask view and I looked all over Ps for such an "action" and also throughout the online manual.
I have a damask flourish design in JPEG format. I want to change the entire color of the design from green to pink. How can I do that? I have an older version of Photoshop Elements 6.0 on my Windows XP machine, but can upgrade to 11 on my Macbook Pro.
View 5 Replies View RelatedCan I add text to a contact sheet before printing?
View 2 Replies View Relatedhow can I prevent a vertical slice being taken from photos when printing a contact sheet?
View 1 Replies View RelatedAfter printing a photograph cannot print another. Error message: "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." have to close and reopen the program to print one more.
I have this program on my laptop as well where it does not have this problem. Have tried reinstalling but problem remains on my desktop.
It looks like a thumbnail in center of layer with the box thing around it...And the paper I'm placing on is 12x12 or 3600x3600px.
View 2 Replies View RelatedWhy when i print a photo on my new HP Photo-smart does it only print in greyscale
View 1 Replies View RelatedI'm unable to get correct results in printing through Photoshop Element 11 and my printer Epson R1800.Though, it works correctly with other software that support colorsync (ex: DXO Optic Pro 8).
I tried every combination with my ICC profile : "let photshop manage colors", "let printer manage colors", ... Each time the resulting print is too dark.Even worth : when I print several time the same photo with the same parameter under Photoshop Element, I don't get the same result each time.
On DXO, I print by activating colorsync with the same profile I use with Photoshop Element and the result is always great with each time correct colors rendition.
My configuration is : iMac 24 2007 + Mountain Lion + Epson R1800.
I am using Elements 6 for Mac with OS 10.6. My printer is a Canon MG8120, which uses several color cartridges (including a black and gray) and a pigment black cartridge.
Today I tried to print a B&W line-art document, and it printed in a faint yellow. I tried another B&W doc, and the same thing happened. I exported the documents as both .pdf and .jpeg, and they printed in B&W using the Preview application.
As it happens, all the color carts in my printer are either low or out of ink. Only the pgiment black is full (I put it in yesterday). So I wonder if my B&W docs have been printing from the color carts and not the pigment black cart. Is there any way to get PSE to use the pigment black cart?
I've recently purchased some Fotospeed printing paper and want to get a custom profile for this. The instructions sent to me by the company only covers Elements 1 - 9. These tell me to select Print then, under Color Management set Color Handling to No Color Management. However, this option on longer is available in Elements 11. I've also checked your website for Elements 10 and it would appear that this option was still available in that version. How can I get around this in Elements 11?
View 15 Replies View RelatedI have the latest gimp.
View 1 Replies View RelatedThis is a file that I created by tracing a .PDF file. I completely detached the .PDF file. I x-ref the file into another file in model space and slap some notes on it. I then make a view port in the layout and I see everything perfectly fine. But when I print I only see the notes and not part of the x-ref file.
I thought the .PDF file might have corrupted the file so I copy and pasted the lines into a new file but even then the x-ref does not print. I checked the layers, they are all set to print.
How do I edit a color image to print well in both color and b&w printing?
View 2 Replies View RelatedHow could I , for example, make anything blue transparent, and anything partially blue - partially transparent, and anything not blue - not transparent? (without resorting to the wand tool)
So basically, if you imagine a selection in black and white, where white is the selection, and black is not, how can I do something similar so blue is treated as the selection (depending on how 'blue' it is).
I mean by color screen (since I can't remember the correct term),
I'm trying to print a certain window of my drawing, but I'm not wanting to print every element contained within that window. How do I hide these elements when they're on the same layer as other elements that I want to print?
View 7 Replies View Relatedall of my layer styles are suddenly invisible. i don't know if i accidentally turned something off somewhere, but they won't show up.
View 3 Replies View RelatedI've been using Photoshop CS2 for several years to enhance my photographs, but just now have encountered something simple I cannot find out how to do. I have on the background layer a picture of a room interior with the exposure set mostly for the open window, but the rest of the room is very dark. On the only other layer, the upper one, I have the same shot exposed correctly for the room, which overexposes the window area. The upper and lower layers are perfectly superimposed, and the upper layer is at 100% opacity.
I have selected the window on the upper layer and want to change the selected area's opacity to blend properly with the window on the bottom layer without changing opacity of the rest of the layer. No matter what I do, changing opacity seems to affect only the entire layer, and I haven't figured out how to isolate the selected area for the opacity change.
I can cut the selection to reveal the darker window on the bottom layer, but this doesn't give me the flexibility I need to balance the two exposures. An opacity change would be ideal.
I can open files, but I can't color anything or open a new layer. The options are grey and unclickable. I've tried restarting my computer and everything, but nothing works in Photoshop Elements.
View 2 Replies View RelatedI have a Gateway 500SE PC, Home XP, Nikon View 6.0.0, Photoshop Elements 1.01. I have a Nikon D100 camera. When I import a Nef uncompressed file into Elements it gives me an error box...Unsupported Color Depth. I must change these pictures to a supported color depth. This takes too much time to change every picture in a folder when you want to make a contact sheet What is this and how do I fix it?
View 4 Replies View RelatedHow do I fill in an entire area with one color, like a paint bucket on ms paint and thinks like that.
View 4 Replies View RelatedWhenever I open a photo with my Adobe Photoshop Elements 9, I get the following message:
The monitor profile “LCD color management and conversion” appears to be defective. Please rerun your monitor calibration software.”
Following the message are 2 buttons: “Ignore Profile” and “Use Anyway.”
What do I need to do?
How do I change skin color using a layer mashow do I apply the mask if I want just change say an arm or just the face area
View 1 Replies View RelatedI am working a small picture (190x250 px). When I add an image as a layer, the only thing I am able so see is the part of the image which is viewable from the image size (see attached screenshot). I swear at some point I was able to see the contents of the entire layer. Am I just imagining this or is there a way to see the entire layer?Attached File(s) a.JPG (58.09K) Number of downloads: 4
View 2 Replies View RelatedRecently I renamed a folder that contained a Maya project. Here's a simple file structure to show what I mean:
I renamed this:
OLDname > mayaProject > scenes > Project01.ma
…to this:
NEWname > mayaProject > scenes > Project01.ma
The mayaProject (and all it's subfolders: scenes, assets, etc.) was created in Maya, and the OLDname folder was where I kept it and the other files related to the project.
After renaming that folder, when I double clicked the Project01.ma file to launch Maya, I received this error:
// Error: Wrong number of arguments on call to pv_performAction
When I relaunched Maya by its icon and used the File > Open Scene… option, I received this error:
// Error: Wrong number of arguments on call to performFileAction does not match number of parameters in procedure definition.
In both cases, Maya opened a blank Untitled file, instead of my Project01.ma file. When I changed the name of that folder back to OLDname, the Project01.ma file opened properly.
My question is, how can I rename or move this folder and still preserve the file hierarchy that Maya needs to open the Project01.ma file?
How do I apply AUTO COLOR to an entire 2-hour .movie video .
View 9 Replies View RelatedWhy are my contact sheet printing darker than my normal print files? I am in CS4 on am Mac OS X.
View 2 Replies View Relatedway two print 2-sided contact sheets? We use a phaser 8200 for cantact sheets witch can print two sided but i can't seem to find a way two get this done in a effient way. Idealy it would be nice to tell photoshop two print all open contact sheets and just be able two sit it two print them 2 sided instead of individualy.
View 3 Replies View RelatedI have a layer of lables for a drawing that all have 1" text, and I want to change all the text to 1.5", without having to scale them individually. There must be some way to select the layer and do a global adjustment of the text font?
I'm surprised I'm not finding this in the menu's, etc.Since I need each text to scale properly from it's own location, I cannot simply scale everything from one base point.
Per the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies View Related