Photoshop :: Cutting Parts Of A Picture Out?
Jul 26, 2008
how I'm supposed to cut off parts of a picture. I know about cropping but that only seems to work only with perfect squares and rectangles. I'm trying to get a picture to look like the edges are actually torn missing (not black or white, but instead actually not on the picture).
I'm wanting all of the black that you see on the holes in the middle and on the edges to actually be cropped off or gone without cutting off anything else. So I don't want it to be a perfect square when it's done but instead have jagged ripped looking pieces on the edges with holes in the middle.
View 1 Replies
ADVERTISEMENT
Dec 10, 2005
I see in alot of graphics are precisely cut out. For instance i saw a graphic with a city in the background and in the lower foreground was a bunch of hands sticking up in the air (like a crowd with the hands held out into the air). Each hand was perfectly cut out though...each individual finger etc. How is that done? How do you precisely cut out things...do people jsut sit there, zoom in and spend there time accurately cutting out whats necassary? What tool is used?
View 9 Replies
View Related
Apr 14, 2004
cutting out an image without using that tool where u have to cut out the picture in a squre form but i want to make it so i can cut out JUST the picture and I can add text behind the picture.
View 2 Replies
View Related
Jan 27, 2003
I created a picture in Photoshop 10.5in X 4in now i would like to cut it into 6 picture all 3.5 X 2 (like a business card size) I was creating a fridge magnet for my Church. Each week we will hand out one piece of the picture and after 6 weeks they will have the full size of the picture to put on there fridge. So, how can I cut the picture into 6 pieces and when they are reassembled they will all fit. I use Photoshop 6.
View 5 Replies
View Related
Sep 16, 2006
Its been a while since i've done this..but whats the best way to say pull me and the motorcyel off this picture?
View 1 Replies
View Related
Nov 5, 2002
I now use the magic wand tool to select most of the selection i want to cut out. But as soon as the "rest" (background) of the pic is sorth of thje same colour then this won't work.
I then go to paint and add an outline around the selection i want to use and start all over again in PS.
View 4 Replies
View Related
Jul 14, 2008
Im trying to cut the top off a bunch of photos (164 to be precise). I only want to cut a small amount off, like the top 20pixels. I need all the photos to be cut identically.
View 1 Replies
View Related
Dec 17, 2011
i am trying to use autocad to nest parts for cutting on a cnc machine. is there any way to make a 2d part have a projected boundary of say .5 inches larger than the part so another part cannot nest closer than that. after the nesting is done, the boundary would be removed. the parts are different sizes and shapes so the projected boundary would have to enclose the part.
View 6 Replies
View Related
Aug 2, 2013
We recently upgraded to 2014 and have been experience significant issues with plotting to PDF. When plotting individual pages, we are able to center the plot and adjust the margins to where they will plot correctly. However, when trying to "batch publish" mutiple layouts of a drawing they all come out off center or parts of them are being cut off.
View 2 Replies
View Related
Jul 20, 2012
Flat pattern sheet metal with a hole cut at an angle. Once flattened it should be 90 deg. to the surface of the sheet for laser cutting. I cannot get inventor to do that.
See images for more details.
Autodesk Inventor 2011 SP2
Windows 7 Ultimate 64-bit
Processor: Intel(R) Xeon(R) CPU W3503 @ 2.40GHz
RAM: 12 GB
SpacePilot Pro
View 9 Replies
View Related
May 19, 2012
I need to divide a shape, say ellipse or similar, into 1 or 2 parts and then color the parts different colors and stroke the borders of each part. I don't want to cut the shape up, just keep it as a multi-colored object.I've tried scissors and similar tools but they cut and this is not what I want.
View 10 Replies
View Related
Jun 5, 2012
I have a layout of office space and saved as a JPEG. I would like to shade the areas of camera views that are based on a 50 degree angle. Can this be done.
View 2 Replies
View Related
Jun 19, 2004
I have a picture and I wanted to follow the tutorial but my english isnt that great so I have somethimes problems during the activity.
I wanted to play with a picture doing makeover.
First I changed the eye color
''New Layer.
Use a hard brush that's the exact same size as the iris, and paint with the desired colour over top of the original iris. Set the blend mode to Hue/Softlight/Overlay. Your choice. The blend mode choice is affected by how light/dark your replacement colour is. Layer Opacity can also be lowered to make the effect more subtle. In my header image, i used 'Hue' blend mode.''
So I did.
Then I wanted to do this:
''Select the white of the eyeball; either using Quick Mask or the selection tools. Add a HUE&SAT Adjustment Layer right above the smoothed duplicate layer. Lower the Saturation and raise the Brightness until the white looks 'almost' white. Don't go too pure white, or it'll look real fake. Click the Layer Mask for the Adjustment layer, and apply the 'Blur More' filter 2x -- to soften the edges a bit, and blend this new white area into the outer edges of the eyeball.''
I did tried this but didnt worked.
When I color it White in the white section of the eye to make it more white, It colors .
But then I need to paly with the HUE/SAT option.
When I do that The PICTURE goes into Hue, not the WHITE PLACE.
I only want to HUE the White place that I marked, not the entire picture.
View 3 Replies
View Related
Nov 24, 2012
How do I move parts of a picture? I have a picture with sketch of a dog at the bottom of the picture, with script above it. All I wish to do is move the script down and move the dog to the top. I have spent hours trying to do this to no avail.
View 8 Replies
View Related
Sep 17, 2013
How do I add color to certain parts of a picture in Photoshop 11
View 3 Replies
View Related
Jun 8, 2012
I want to remove the background stuff so i can use the picture of smoking guy in a signature.
[URL] (Picture shows the parts i want to remove).
View 12 Replies
View Related
Aug 1, 2011
I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
View 8 Replies
View Related
Aug 2, 2012
Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies
View Related
Jun 22, 2013
I have a pen sketch scanned with resolution ~ 7000x5000px 300DPI. When I'm trying to trace the whole image with Illustrator CS6 into b/w, I am losing details overall. Example is on the left side. It's just part of the image.
However, when I tried to isolate a couple small raster pictures from the big one and trace them separately, I got pretty good results comparing to tracing a whole picture. The isolated images are with resolution ~700x800px 300DPI.
The problem is that I can't isolate all elements in sketch then combine after tracing, it's hell lot of work. So my hope is that there is some technique of tracing big images.
View 1 Replies
View Related
Jan 14, 2013
I'm creating t-shirt pictures and have a problem: Spreadshirt says that my pictures have tiny objects in it, and that they have too many different colors. (I'm only allowed to have 3) I want to color all the transitions between the colors, but how do I select them without having to color one little spot at the time? Is it any way to just remove the transitions? And how do I remove the objects that are too small? Select same fill color doesn't work, or I'm doing it wrong. I also clicked expand to fix a text issue, don't know if that matters.
View 17 Replies
View Related
Jun 25, 2011
when i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
May 2, 2013
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
View 4 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Aug 7, 2013
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
View 2 Replies
View Related
Dec 9, 2013
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
View 3 Replies
View Related
Jul 10, 2012
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
View 2 Replies
View Related
May 3, 2013
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 5 Replies
View Related
Sep 22, 2011
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
View 2 Replies
View Related
Jul 25, 2012
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies
View Related
