Illustrator :: Parts Of Picture Are Small And Too Many Color Transitions?
Jan 14, 2013
I'm creating t-shirt pictures and have a problem: Spreadshirt says that my pictures have tiny objects in it, and that they have too many different colors. (I'm only allowed to have 3) I want to color all the transitions between the colors, but how do I select them without having to color one little spot at the time? Is it any way to just remove the transitions? And how do I remove the objects that are too small? Select same fill color doesn't work, or I'm doing it wrong. I also clicked expand to fix a text issue, don't know if that matters.
View 17 Replies
ADVERTISEMENT
Sep 17, 2013
How do I add color to certain parts of a picture in Photoshop 11
View 3 Replies
View Related
Jun 22, 2013
I have a pen sketch scanned with resolution ~ 7000x5000px 300DPI. When I'm trying to trace the whole image with Illustrator CS6 into b/w, I am losing details overall. Example is on the left side. It's just part of the image.
Â
However, when I tried to isolate a couple small raster pictures from the big one and trace them separately, I got pretty good results comparing to tracing a whole picture. The isolated images are with resolution ~700x800px 300DPI.
The problem is that I can't isolate all elements in sketch then combine after tracing, it's hell lot of work. So my hope is that there is some technique of tracing big images.
View 1 Replies
View Related
Sep 16, 2013
My problem is Adobe Illustrator will not print certain parts of a flyer I created in color. The Left side picture prints ok but the text "Art Department" prints in b&w.
View 1 Replies
View Related
Nov 27, 2007
First layer, the blue one, actually background, was applied gradient and you see the water drop image in the right on the 2nd layer but as you can easily recognize, it looks so artificial because the color flow of the layer on the left is cut abruptly by the image on the right. So how i can make a soft color transition between those 2 layers so that they look pieces of the same composition?
View 3 Replies
View Related
May 19, 2009
I stitched together a panorama of the city that I live in. The sky in the picture has an annoying dark spot, that I would like to smooth out without affecting the colors of the photo. Most online articles say to remove the sky and replace it with a gradient, but I would lose a lot of the detail that I want to keep (tower antennas, clouds, etc...) so I would like to smooth the color transition instead,
View 1 Replies
View Related
Apr 23, 2012
Many of the transition effects have a green color. Is there a way to change mulitples at a time or is the only way to do one at a time? I'd rather use a more neutral color than bright kelly green.
View 3 Replies
View Related
Mar 1, 2014
I scanned and live traced a drawing of mine. I want to add color to make it a proper vector illustration for example:
But when I try and change the colour of the outline of say the skin, this changed the outline of everythign else (hair, clothes) because the lines are all joined. How do I only change the colour of the outlines surrounding certain areas?
View 3 Replies
View Related
Jan 6, 2006
Does anyone know what is the name of the program that can put many small pictures into one big picture!
View 7 Replies
View Related
Dec 2, 2007
how this made?
View 1 Replies
View Related
Apr 21, 2006
I am very much a Noob at photoshop, this is officially the 2nd time I have used it. I have a small image, I want to rotate it 30 degrees counterclockwise. I also mant to put a small black border (10 pixels) around the outside of it. You can see the one I tried up in the banner on my developing site.
View 1 Replies
View Related
Apr 12, 2012
I want to enlarge a small photograph with the zoomtool.And when I try to save it on the desired percentage of 100% or so it returns back to it's original size ;After I have saved it as a new copy (image) with a new name.I have tried all the possibilities to save it within the larger size. Even by printer. Everything was in vain.But once it is transferred to the documents files it goes back to the original size.
View 4 Replies
View Related
Dec 21, 2013
I run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
Â
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
Â
I tested printing from Photoshop 5.1 and that worked fine.
View 16 Replies
View Related
Nov 15, 2012
I am using Photoshop Elements 10. How do I convert a picture to B&W and then erase part of the picture for the color?
View 4 Replies
View Related
Jun 5, 2012
I have a layout of office space and saved as a JPEG. I would like to shade the areas of camera views that are based on a 50 degree angle. Can this be done.
View 2 Replies
View Related
Jul 26, 2008
how I'm supposed to cut off parts of a picture. I know about cropping but that only seems to work only with perfect squares and rectangles. I'm trying to get a picture to look like the edges are actually torn missing (not black or white, but instead actually not on the picture).
I'm wanting all of the black that you see on the holes in the middle and on the edges to actually be cropped off or gone without cutting off anything else. So I don't want it to be a perfect square when it's done but instead have jagged ripped looking pieces on the edges with holes in the middle.
View 1 Replies
View Related
Jun 19, 2004
I have a picture and I wanted to follow the tutorial but my english isnt that great so I have somethimes problems during the activity.
I wanted to play with a picture doing makeover.
First I changed the eye color
''New Layer.
Use a hard brush that's the exact same size as the iris, and paint with the desired colour over top of the original iris. Set the blend mode to Hue/Softlight/Overlay. Your choice. The blend mode choice is affected by how light/dark your replacement colour is. Layer Opacity can also be lowered to make the effect more subtle. In my header image, i used 'Hue' blend mode.''
So I did.
Then I wanted to do this:
''Select the white of the eyeball; either using Quick Mask or the selection tools. Add a HUE&SAT Adjustment Layer right above the smoothed duplicate layer. Lower the Saturation and raise the Brightness until the white looks 'almost' white. Don't go too pure white, or it'll look real fake. Click the Layer Mask for the Adjustment layer, and apply the 'Blur More' filter 2x -- to soften the edges a bit, and blend this new white area into the outer edges of the eyeball.''
I did tried this but didnt worked.
When I color it White in the white section of the eye to make it more white, It colors .
But then I need to paly with the HUE/SAT option.
When I do that The PICTURE goes into Hue, not the WHITE PLACE.
I only want to HUE the White place that I marked, not the entire picture.
View 3 Replies
View Related
Jun 8, 2012
I want to remove the background stuff so i can use the picture of smoking guy in a signature.
[URL] (Picture shows the parts i want to remove).
View 12 Replies
View Related
Nov 24, 2012
How do I move parts of a picture? I have a picture with sketch of a dog at the bottom of the picture, with script above it. All I wish to do is move the script down and move the dog to the top. I have spent hours trying to do this to no avail.
View 8 Replies
View Related
Mar 12, 2013
I'm having issues with parts that were drawn in 2012 being a different color in 2013. It's the same color just a noticeably different shade. Not all parts have this color difference.
It only does this on certain parts so I when I have a bunch of the same parts mated together in an assembly it renders out with different shades and looks goofy.
See pic attached - All piping is Dark Grey in color - The verticals right below the top valves are a different shade - When I check both colors in the part files they are listed as Dark Grey.
View 9 Replies
View Related
Jan 31, 2013
it seems to be a bit messy. I set it to F10 like in 2012 and the small popup box with the color picker doesnt seem to pop up proper. Something blinks on the top right corner and disappears. Same goes for colorbar. Any workaround or fix for this one?
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
View 5 Replies
View Related
Dec 5, 2011
I am wanting to display previews (pngs) of the ai files in the plugin that match search criteria on a button. As the user scrolls through the results, change the button picture to be the png for that ai file. I tested it with a default image in case the image doesn't exist. The test image is cropped to the size of the button.
Â
The pngs are necessarily 600x600 pix. (For other applications). I want to resize them for display on the button.
Â
(The button is only 100x100).
Â
Do I need to use Image/Drawer suites?
View 2 Replies
View Related
Sep 8, 2012
Is there anyway to transform a 4-color picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.I could, or migh, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.They are book covers, which only need to protect the book.
View 3 Replies
View Related
Sep 8, 2012
Is there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
View 3 Replies
View Related
Jun 25, 2011
when i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies
View Related
Feb 1, 2011
Which tool would be used to draw a small pyramid and fill with a solid color?
How could I rotate this pyramid 45 degrees?
View 5 Replies
View Related
Dec 22, 2005
I have a color picture which I took, of a red berry bush. I want to remove all the color except for the red from the berries. I know how to lasso the berries, but I can't remove the color from the bush/background and leave the red berries.
Note: I did this once a couple years ago, and can't remember how I did it..I have some memories, but probably remember just enough to make me dangerous. I have done some searches but obviously the results are numeorus and I haven't found what I am looking for yet.
I know the solution involves selecting the berries and then inversing it and then setting all 3 colors to 0 for the background.
What I can do is
1) lasso the berries
2) inverse
what I can't figure out
1) it seems like there was 1 step about layering which enabled me to get started, but I don't remember this, it does seem like I am missing something very basic when I try to do this
3) Where is the color scale, the only thing I can find is the grayscale option which switches the entire project to black and white.
View 4 Replies
View Related
Oct 1, 2005
I have a color picture, and I want to convert it to B&W, and then I want to add another color to it (for example – red). I don’t want to paint some areas in it, I want for example to keep all the red parts of the picture, or only part of the red parts.
It something like in the movie Schindler's List, in the B&W scene where you see a little girl with red coat.
View 1 Replies
View Related
Feb 2, 2009
I have to B/W a load of photos and keep color a few items example
i have 3 girls and the bikinis want doing. Is it just a case of carying on the way im doin or is there an easier way.
Layer - New Adjustment layer - channel mixer - and Monochrome checked
and using black and white to suit.
View 6 Replies
View Related
May 24, 2013
I'm relatively new to using illustrator and im trying to change the dpi of a drawing. One of my frinds made a T-shirt design in a non adobe software program, forget it know, and accidentally draw it at a 100 dpi file and looks blured when changed to a 185x185 pixel size. Can I take that file and change it to 300 dpi?
Â
Go to effects>
Document Raster Effects>
and select dpi quality
Â
I've already done that and it doesn't look like it did anything. Does it need to be redrawn?
Â
I'm running cs6
View 3 Replies
View Related
Dec 15, 2013
I have a problem with drawing small circles in Illustrator, because when I export them they are not "smooth". The edges seem like truncated. Have a look here with "Pixel preview" turned on:
Â
And now, setting an offset of +0.5px for X and Y, the circle is how I want it to be:
Â
Why? Is there a way to "smooth" the circle?
View 3 Replies
View Related
