I'm relatively new to using illustrator and im trying to change the dpi of a drawing. One of my frinds made a T-shirt design in a non adobe software program, forget it know, and accidentally draw it at a 100 dpi file and looks blured when changed to a 185x185 pixel size. Can I take that file and change it to 300 dpi?
Go to effects>
Document Raster Effects>
and select dpi quality
I've already done that and it doesn't look like it did anything. Does it need to be redrawn?
I created a logo in ai cs5 that is the size of 7w x 4h. But I wanted to be able to create a larger jpg. Since the vector format allows for the image to be scaled, is there a way to scale it larger, then create a jpg at this larger size? Or, is there a way to scale it to 500% and then save it as a new file with this enlarged size being 100%? I'm fairly new to AI, but have used PS for quite some time.
I lost a psd due to a hydro shut off and it won`t open. I do though have a version of it at 800 pixels at 150dpi. Can I or is there any way to make that a 300/600 dpi clear like the origional psd?
Just downloaded the trial of Video Studio Pro X6 and am trying it out. I have a past background with Adobe Premiere and even VideoPad, so while I'm not new to video editing, X6 is a little different to me. My two main problems at present are sizing and capture.
I'm trying to figure out how to resize clips that are too small, or too large for that matter, to the mpeg2 standard of 720P (16:9) I usually use. When I put...say...a 640 x 480 clip or still on the timeline there seems to be no tool to change their sizes with (that I have found so far). There are 8 squares that sometimes show up on the image, which allow me to resize, but when finished and I go to do something else, the image just pops back to it's original size. So I must be missing something here.
The second main problem I'm presently having is capturing video...which the program won't do. At present, I am capturing analog video through a USB device. When I try to capture, I get an error message telling me that the capture plug-in is already in use, or is missing, or so on. I have discovered on the web that this problem is very common! Why? I have never had a video capture setup on this particular computer before, so there's nothing on it to interfere with X6. So should I assume that the capture plug-in is not included with the trial? Can this plug-in be downloaded by itself?
I need to print large photos on a small printer and then mount them together on a large board, but no matter how I do it I seem to get either overlap of gaps between the printed photos. I found a good way to mount the photos so the edges of the paper are not too visible (from a distance), but I can still see gaps and overlays. The Photo image has a width of 24 in by 33 in. I'm trying to print it on nine (9) 8X11 papers.
I have a photo that I copied from an Power Point Presentation which looked great on Power Point but when I have it in PS I noticed that the image size is just 2.507x1.028 with a res. of 576. Pixel Dimensions are 2.45M
I would like to print out a larger version of this photo but I'm not having much luck with it. It gets blurry when I try to enlarge it.
It was on Power Point as PNG graphic and I saved it to the desktop as a Gif andthen dragged it into PS.
Don't know much about Power Point maybe there is a better way to transfer pics from it.
I'm trying to make an image 879X593 px into a banner about 950 x 130 px. Is this possible to do this in Photoshop without causing the image to stretch or distort the items inside it? Are there other options even in Fireworks?
I have a lot of engineering data, dimensions, etc, to enter into an existing IDCS6 Table. I need whole numbers to display full size, but fractions to be small size. I know I can use Open Type and select the Fractions option for each individual fraction, but that would take forever.
How do I create a style (or whatever) that will allow me to just type in the numbers and have them automatically apply small formatting to the fraction portion of the number whenever it sees a "/"?
Along a similar line, I was trying to copy table data from a PDF document from Acrobat X Pro and paste that into an IDCS6 table, so each cell is populated by the appropriate cell data from the PDF file, but didn't have any success. That would really save me a lot of time, because I have many complete tables in PDF format. The data is not protected in the PDF, but I'm having a hard time figuring out how to bring it over to IDCS6.
I have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
We have a computer that using AutoCAD Architecture 2013 and Acrobat 9 Standard. When printing a large sheet (30"x42") with images in it to a PDF the images do not appear in the newly created PDF. However, if the same file is printed to fit an 11x17 the images display correctly. Any thoughts as to why the large sheet size is not printing properly?
I have been learning about Textures and I've been playing around with different ones and so I have come across a great site with lots of Texture files for download ...
[URL]......
Well, the files are small eg: 38x38 and 76x76 and how to create a larger image with these small images. Also, they are in .png format... if that matters.
From what I've read a Texture is a Pattern ... right? So, I have searched the FAQ's, the Manual etc. for things like: How to make a large Pattern, How to use a small file for a large Pattern and so forth but I can't find the right info.
Am I suppose to use them to create a Repeating Pattern? Can I do this and have them be seamless?
what Im looking and seen it around other places is like an outer glow but instead of a glow its dots where the dots closest to the object are large and close together and as they move out they get smaller and further apart...
I have a problem with drawing small circles in Illustrator, because when I export them they are not "smooth". The edges seem like truncated. Have a look here with "Pixel preview" turned on:
And now, setting an offset of +0.5px for X and Y, the circle is how I want it to be:
I am running Illustrator CS6, and I have found that Illustrator lags a lot when I have multiple objects that are very small. For example, for my school project I am creating four seasons, and I have multiple leaves on the trees, but since they are very small and I have multiple copies it slows Illustrator down siginificantly. What I am trying to figure out is if there is a way to reduce the quality of the artwork, so that It can run fast when I need it to. Below is a link to download the file, so you can see what I mean. Right now it lags when you zoom In/Out or if you try and move the object. Also, my computer Specs are listed below
For the most part, it loads files very quick but after making multiple copies of files its starts to really lag a lot. The download link is below [URL] ....
Anytime I double-click on an Illustrator file to open it, the Illustrator CS6 window opens up too small to view the file. It comes up with an error message that says "Can't open the illustration. There is not enough room for the window; increase document area and try again."
If I then click on the box to expand the Illustrator window to full-size, then I can open the file. It's just frustrating that everytime I try to open an AI file by double-clicking on it, I get this error message.
I can't seem to move objects in my drawing small distances..I'm used to being able to do this..must be some setting I hit, but I can't find which one it might be. I have snap to off, but this isn't behaving like snap to..it's behaving like I'm only "allowed" to move objects certain distances; any smaller and the object simply doesn't move at all..
removal of small objects in a drawing. I made with ArcGIS a map of the Netherlands. Because it is a detailed map, it also becomes heavy and my computer slows down. I merged some smll elements together with the pathfinder-unite command, but it is still to heavy. So I have to delete some other elements. The problem is that I want to get rid of all the small objects, but I dont know how to select them. It is a topograpic map with for example houses, lamp post et cetera, but I actuallly need only the build areas.
I want to try just putting a small stroke that goes around the outside of the drawing, however when I do select all and apply the stroke, it obviously strokes the inner parts of the drawing (for instance the mouth, eyes, dimples, etc). I've tried merging all of the layers, but it doesn't work.
I am having a very unusual problem when saving from Illustrator CS5.5 to our SBS2011 server. All other components of Design Standard are unaffected.
Suppose that I am working on Version 10 of file and go to SAVE AS > Version 11. Illustrator will often return the error “The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder” even though I have permission to write to that directory.
When I check the directory the file Version 11 has been created but contains 0kb of data. If I then attempt to over-write Version 11 via SAVE AS it works perfectly, everytime.
This behavior is also present on another - identical – workstation using the same software. The systems affected are both running Windows 7 64bit.
I have created a basic document in illstrator CC, and when I try to 'Save for Web' the image opens in the save for web panel extremely small, although says it is 100%, and it is pixellated. I'm using a brand new MacBook pro.
I want to blend two similar paths. Both paths have dashed lines as strokes, and both dashed lines go from big to small dot, in decreasing direction. I want to blend both paths, so the blend goes from big to small, in BOTH directions. The ideal ending image would show the biggest dot at the top left corner, and the smallest, at the down right corner (the final project involves two spirals, but for the sake of simplicity, I attach two straight lines).
I try to blend them, and the blend only goes in one direction, as seen in the attached samples (in the sample, it goes from top to bottom, but it doesn't go from left to right). It seems that Illustrator takes only the first dot size, and applies it as if all the path has the same dot size.
I really want to make a small honeycomb swatch pattern (the polygons should be small - 2 px x 2px) , but I just cannot get it to work. What I did is make one small polygon, and went to: Object>pattern>make and applied the following settings:
You will see that on the shoulder of the t-shirt, the pattern is kinda trasparent - the bottom layer is visible-I don't want it to be.The bottom pattern(on the side of the t-shirt) you will see came out fine, except that the polygons are too big and I cannot get it any smaller.
I'm creating t-shirt pictures and have a problem: Spreadshirt says that my pictures have tiny objects in it, and that they have too many different colors. (I'm only allowed to have 3) I want to color all the transitions between the colors, but how do I select them without having to color one little spot at the time? Is it any way to just remove the transitions? And how do I remove the objects that are too small? Select same fill color doesn't work, or I'm doing it wrong. I also clicked expand to fix a text issue, don't know if that matters.
I'm working on a collage, and I'm not sure if Illustrator, InDesign or PS would be the best application to use.
I've got 7 sheets of paper, each with a bunch of black and white line drawings, that I've scanned into seven PDFs. I need to be able to select, cut, paste, resize, rotate, and move around each of the little drawings onto one big artboard - about 150 little drawings total.
I did this once in Illustrator already, and I learned the hard way that the "transform" tool also changes image resolution - I scaled the individual drawings down just so I could fit them all on the page, and when I tried to scale them back up again to make the layout look nice, they were extremely pixilated. I'd like to avoid this time loss the second time around!
What is the best way to select all of the little drawings from the larger PDF, copy, and paste into a new master document, erase the white background, and then manipulate the layout?
I started to use Illustrator since CS2 and done heaps of shapes using the 3d feature.ever since cs5 and beyond, ive encountered a problem when ever I import or copy paiste from illustrator into Photoshop my 3d shape tends to have missing blend steps. I'm setting it to 256 blend steps to get a smooth transition but when i import my Ai into ps or copy paiste it notice that it leaves some small gaps in between the blends. Now does this happen to any other users?
On the left is illustrator using 3d and on the right is the copy paisted/imported Ai file,ive put a red shape behind the yellow ace of spade to make it clear that the red is noticeable.
