I'm trying to make an image 879X593 px into a banner about 950 x 130 px. Is this possible to do this in Photoshop without causing the image to stretch or distort the items inside it? Are there other options even in Fireworks?
View 2 RepliesI lost a psd due to a hydro shut off and it won`t open. I do though have a version of it at 800 pixels at 150dpi. Can I or is there any way to make that a 300/600 dpi clear like the origional psd?
View 4 Replies View RelatedJust downloaded the trial of Video Studio Pro X6 and am trying it out. I have a past background with Adobe Premiere and even VideoPad, so while I'm not new to video editing, X6 is a little different to me. My two main problems at present are sizing and capture.
I'm trying to figure out how to resize clips that are too small, or too large for that matter, to the mpeg2 standard of 720P (16:9) I usually use. When I put...say...a 640 x 480 clip or still on the timeline there seems to be no tool to change their sizes with (that I have found so far). There are 8 squares that sometimes show up on the image, which allow me to resize, but when finished and I go to do something else, the image just pops back to it's original size. So I must be missing something here.
The second main problem I'm presently having is capturing video...which the program won't do. At present, I am capturing analog video through a USB device. When I try to capture, I get an error message telling me that the capture plug-in is already in use, or is missing, or so on. I have discovered on the web that this problem is very common! Why? I have never had a video capture setup on this particular computer before, so there's nothing on it to interfere with X6. So should I assume that the capture plug-in is not included with the trial? Can this plug-in be downloaded by itself?
hi all i have a epson 7800 printer that i print onto canvas 99 % are ok as i do landscapes,sunsets ect i have started doing photos onto canvas people email me the image at 300 dpi then i edit image in photoshop cs3 the problem i have sometimes it looks distorted not all the time sometime they send me a image that is 2x4 inches dpi is 300 when i blow it up to 20x16 inches or bigger it does not look right i know the image should be bigger that they send me is there a way round this so when i blow up a image it looks like it has not been distored i am ok with photoshop as i am learning new tricks evryday any info would be great
View 1 Replies View RelatedI am experiencing image distortion with vector shapes or outlined letters with scale down. Shift + Alt + Click locks in the proportions of the image as a whole but what happens is individual letters/shapes become distorted resulting in a completely different look.
View 1 Replies View RelatedI am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
Im making a forum signature, but I don't know how to resize the image to small so in the canvas the image will show the body instead of just the head
View 4 Replies View RelatedI developing a new website for a client....the challenge is that they have a load of images and photos that they want on the website...
Apart from causing the webpages to load slowly, Google also penalises these webpages.....
How to resize images to small sizes in pixels (25-35kb) but the image must still be fairly large i.e 600x600 and it must look good?????
Are there other programs available that can do this? Preferably free!
I've recently started trying to learn how to use GIMP through making signatures, and for the past 2 weeks or so, it has been going fine.
Today, when attempting to resize the large image down to signature size, even though the preview shows a good quality render, after it scales the image loses all quality. Whats more, thinking it might just be a poor image, I tried to resize previously succesful images and got the same bad result.
Here are some screenshots showing pre / post scale [URL]...
Preview there is fine, and shows a good quality render (exactly what I'm looking for)
[URL]...
This is the result
I understand that the aspect box is unticked, but even with that selected the image became distorted
I have also tried cubic / Sinc, both resulting in blurry picture.
The most frustrating thing is that the preview shows that the picture can be made that small and retain it's quality, and up until now this has not been an issue.
Everytime i try to resize(smaller) a picture it becomes distorted. Is there a way to avoid distortion.
View 4 Replies View RelatedI created a design for my fraternity's new rush banner we need to have made. It's going to be 10ft x 8ft. I originally sent the design scalled down to 1000pixels x 800 pixels. The gentleman working with us replied that I must send him the image scaled down at 350 dpi or in real size at 72dpi. After changing the resolution to 350 pixels per inch (I'm assuming that means dpi), I tried scaling it up just to make sure everything looked correct. *The problem is though that when scaled up to 120in X 96in, the text as well as edges of the colors have a haze around them. Will this come out when printed?
View 5 Replies View RelatedMost publishers cap the file size of banner ads at 30 KB to 50 KB. Is that possible using Edge? I know someone asked a question like this two years ago, and the reply was to use a CDN to serve the larger .js files. Is there a more direct approach now that Edge is no longer in preview?
View 3 Replies View RelatedMy lens profiles in the distortion correction list are small. I looked at the official list and mine is not right. I only have one Tamron lens profile. Nikon and Canon only have about 6 lenses each. What gives?
View 2 Replies View Related
I am trying to generate A4 tiles of a large banner (13m x 3m).
In the layout mode, I can't seem to get the image size to be set at 100%. If I manually set the image size to 100% and click on apply, this drops back to 38%. 38% is the highest it seems accept.
Is this a limitation with CorelDraw? Is there a way around this?
I have a client who asked me to create artwork for a banner she is printing for a trade show. The banner is 19.5 FEET long and almost 8 feet high. I have designed the banner as 6.5x2.6ft with the intent of then dividing it into 9 equal parts which I would blow up to 6.5x2.6 and send off to the printer. So far so good. The problem is that the segments are still so large that when I try to export them as PDFs, I am running out of memory. I tried doing them as jpegs, but when I change the resolution for export to 300dpi, nothing changes- the number of pixels x umber of pixels doesn't increase. My client needs this artwork off to her printer asap and I am at a complete loss.
View 4 Replies View RelatedCreated 4' x 8' artwork in illustrator for a vinyl banner (w/my company logo, tagline & images). Saved file as a PDF and sent to printing company. Just received banner and everything looks great, except our Logo/tagline... they look grainy as if either it was a JPG or I'm thinking the logo/tagline did not link up and the low quality place holder printed? Either way, I'm trying to find out if it is something the printing company messed up or if it's something I messed up—and if it was my fault, how to avoid this in the future.
Logo with tagline was created in illustrator.I did not "Place" the logo & images in the banner file. Rather I opened the files in illustartor and "Drag & Dropped" them in the banner file.Converted the text of Logo with tagline to "outlines".Then saved as PDF from illustartor.
The picture below is hard to see, but you can really see it best at the top of the "t" as if it was cut out with a polygonal lasso tool.
An A4 Aiptek tablet is roughly the same price as an A6 Wacom.
someone who had bought an Aiptek based tablet that did not work.
I need to print large photos on a small printer and then mount them together on a large board, but no matter how I do it I seem to get either overlap of gaps between the printed photos. I found a good way to mount the photos so the edges of the paper are not too visible (from a distance), but I can still see gaps and overlays. The Photo image has a width of 24 in by 33 in. I'm trying to print it on nine (9) 8X11 papers.
View 2 Replies View RelatedI have a photo that I copied from an Power Point Presentation which looked great on Power Point but when I have it in PS I noticed that the image size is just 2.507x1.028 with a res. of 576. Pixel Dimensions are 2.45M
I would like to print out a larger version of this photo but I'm not having much luck with it. It gets blurry when I try to enlarge it.
It was on Power Point as PNG graphic and I saved it to the desktop as a Gif andthen dragged it into PS.
Don't know much about Power Point maybe there is a better way to transfer pics from it.
I'm relatively new to using illustrator and im trying to change the dpi of a drawing. One of my frinds made a T-shirt design in a non adobe software program, forget it know, and accidentally draw it at a 100 dpi file and looks blured when changed to a 185x185 pixel size. Can I take that file and change it to 300 dpi?
Go to effects>
Document Raster Effects>
and select dpi quality
I've already done that and it doesn't look like it did anything. Does it need to be redrawn?
I'm running cs6
I'm using Photoshop CS6 to assemble and export a series of extremely high-res tiles. Long story short, they will be used to make up a large map in a mobile app.
I have a pretty tight deadline and I've just been stopped in my tracks by an error I get when I try to scale them up.
Each tile is a layered PSB file, 16384 x 16384px at 72dpi, about 2-3GB in size. All I want to do is scale them up to double their size - 32768 x 32768px.
When I try to do this, I receive the error, 'Could not complete the Image Size command because the result would be too big'.
What exactly does this mean in terms of size (filesize or pixel dims)? What's the problem?
Since I'm working in PSB format and I'm resizing within the bounds of the 300,000px limit, I don't understand why I'm not permitted to scale up to 32768px.
I need to preserve the layers as Smart Objects in order to upscale them... so no flattening.
All I can think of is splitting the files into smaller tiles (I currently have 28 tiles to upscale).
I design custom banners which include both text and images and have no problem saving my files as PSDs or PDFs as long as I stay under 96" wide.
The minute I go wider, CS4 no longer gives me all my normal options, instead it gives me TIF, PSB, Photoshop RAW, or DICOM.
I usually try to give my banner production house files that are not undersized as I don't want to have all the edges aliased and jaggy.
Especially photographic portions of the banner. Is there a size limitation with CS4 Photoshop regarding saving in "normal" file formats?
Typically I give my production house 300dpi PDFs and it works out great.
I created a logo in ai cs5 that is the size of 7w x 4h. But I wanted to be able to create a larger jpg. Since the vector format allows for the image to be scaled, is there a way to scale it larger, then create a jpg at this larger size? Or, is there a way to scale it to 500% and then save it as a new file with this enlarged size being 100%? I'm fairly new to AI, but have used PS for quite some time.
View 3 Replies View RelatedI am working in Photoshop CS 6 - I like to use the application frame option but it makes the frame too large and does not allow me to resize.How can I reduce the size?
View 3 Replies View RelatedI work at an architectural company and I need to resize a lot of images in our database. We’re talking about roughly 40.000 images, but that is not the hurdle.Previously I have made an action that resizes my images in two steps, because I need them in two different qualities When I open the image and runs the action, it does something like this:
Convert mode: Convert to RGBSave: As JPEG, quality 10, and in a certain folderImage size: width 800px, constrain proportionsSave: As JPEG, quality 8, and in another folderClose Now I want to make a change to that action, by resizing the image two times instead of one.I want it to look something like this:
Convert mode: Convert to RGBImage size: width 4000px, constrain proportions (BUT ONLY IF THE IMAGE SIZE IS LARGE ENOUGH, OTHERWISE LEAVE IT AS IT IS)Save: As JPEG, quality 10, and in a certain folderImage size: width 800px, constrain proportionsSave: As JPEG, quality 8, and in another folderClose
How can I do this? Do I need to add a variable or?
How can I make the width of a stroke vary in width from large to small like in the attached image on the left side of the cloud?
View 3 Replies View RelatedI'm using PS Elements 11, I have a large # of pictures to resize (over 500). Is there any way to resize a large # at one time? Doing one at a time takes up a lot of time, I was thinking if I can do 20-50 at I time.
View 2 Replies View RelatedI imported small (2.25 square) .
All was well untill I tried to print. Preview panel blank Photo in top corner at original size.in cell.
I have a lot of engineering data, dimensions, etc, to enter into an existing IDCS6 Table. I need whole numbers to display full size, but fractions to be small size. I know I can use Open Type and select the Fractions option for each individual fraction, but that would take forever.
How do I create a style (or whatever) that will allow me to just type in the numbers and have them automatically apply small formatting to the fraction portion of the number whenever it sees a "/"?
Along a similar line, I was trying to copy table data from a PDF document from Acrobat X Pro and paste that into an IDCS6 table, so each cell is populated by the appropriate cell data from the PDF file, but didn't have any success. That would really save me a lot of time, because I have many complete tables in PDF format. The data is not protected in the PDF, but I'm having a hard time figuring out how to bring it over to IDCS6.
On a Mac, OSX 10.8.5.
In previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
I have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
View 3 Replies View Related