InDesign :: IDCS6 - Create Tables With Large Whole Numbers And Small Fractions?
Feb 20, 2014
I have a lot of engineering data, dimensions, etc, to enter into an existing IDCS6 Table. I need whole numbers to display full size, but fractions to be small size. I know I can use Open Type and select the Fractions option for each individual fraction, but that would take forever.
How do I create a style (or whatever) that will allow me to just type in the numbers and have them automatically apply small formatting to the fraction portion of the number whenever it sees a "/"?
Along a similar line, I was trying to copy table data from a PDF document from Acrobat X Pro and paste that into an IDCS6 table, so each cell is populated by the appropriate cell data from the PDF file, but didn't have any success. That would really save me a lot of time, because I have many complete tables in PDF format. The data is not protected in the PDF, but I'm having a hard time figuring out how to bring it over to IDCS6.
On a Mac, OSX 10.8.5.
View 3 Replies
ADVERTISEMENT
Feb 18, 2014
How do I create numbered lists in InDesign where the number is a paper or white character inside a colored circle?Is this a glyph? A combination of a numbered list and circles?
View 4 Replies
View Related
Apr 21, 2014
Why are the Pantone Color tables/libraries in INDD CS6 and CC giving the incorrect process builds?
View 12 Replies
View Related
Apr 1, 2014
is it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
View 1 Replies
View Related
Feb 6, 2014
I need to edit page numbers (see below). I have tried to delete, move, copy, and select to no avail.
I know you can add page numbers by going to Type > Insert Special Characters > Markers.. The options listed in Markers are not clickable. how I can edit these page numbers.
View 3 Replies
View Related
Mar 12, 2013
I have three large numbers
2,729,895
2,735,986
2,741,965
How can I graph these using Illustrator 3? When I enter them, I get this message Also, when I try to override the override the value axis numbers, it won't let me enter a number that high.
I need to do this soon and I just need a method that will work with such large numbers and maintain the accuracy of the data relationships.
View 19 Replies
View Related
Dec 4, 2012
Have to Graph some data that involves the population within an age group. The lowest number on the graph needs to be 3,700,000 and the highest 4,800,000. I plot the data BUT how to adjust the settings to get the lower number I need. Divisions should be "11" but
- Object; Graph; Type; Graph Options; Value Axis - but then I can not enter 3,700,000 as the minimum.
View 3 Replies
View Related
Jul 3, 2013
I purchased LR5 and found out it can't read my Photoshop psd files. So as it stands I have about 10,000 psd files that LR can't read. Is there a easy way to batch convert so LR can read. Or just trash LR and stick with CS6.
View 23 Replies
View Related
Jan 12, 2009
we have a design that we want to fill with 100 pictures. Then we want to be able to replace those pictures with another 100 pictures and so on. The design will have blends and other things applied to it so when the new pictures are input they would have the effects applied.
View 3 Replies
View Related
May 24, 2013
I'm relatively new to using illustrator and im trying to change the dpi of a drawing. One of my frinds made a T-shirt design in a non adobe software program, forget it know, and accidentally draw it at a 100 dpi file and looks blured when changed to a 185x185 pixel size. Can I take that file and change it to 300 dpi?
Go to effects>
Document Raster Effects>
and select dpi quality
I've already done that and it doesn't look like it did anything. Does it need to be redrawn?
I'm running cs6
View 3 Replies
View Related
Feb 28, 2014
I set up a pretty little table of contents for a handbook and wrestled the styles into place. But, for some reason, I have two page numbers that are wacked out to the right of everything else.
The page numbers are set up on the master page and are very simple. It's the same master for all of the pages.
There are two styles at work in the TOC, messing with those doesnt change anything.
Why would these two, and only these two, get kicked off their mark?
View 4 Replies
View Related
Jul 15, 2012
I would like to be able to export large numbers of images at a time with the same size, compression, etc. and be able to save these export settings so I can use them again. Does LR have this ability? What is it called?
View 1 Replies
View Related
Oct 23, 2012
I created a logo in ai cs5 that is the size of 7w x 4h. But I wanted to be able to create a larger jpg. Since the vector format allows for the image to be scaled, is there a way to scale it larger, then create a jpg at this larger size? Or, is there a way to scale it to 500% and then save it as a new file with this enlarged size being 100%? I'm fairly new to AI, but have used PS for quite some time.
View 3 Replies
View Related
Jul 5, 2012
How do I set it so that when I type fractions in a text box it automatically keeps them as non-stacked fractions rather than horizontally or diagonally stacked?
View 2 Replies
View Related
Apr 2, 2012
I lost a psd due to a hydro shut off and it won`t open. I do though have a version of it at 800 pixels at 150dpi. Can I or is there any way to make that a 300/600 dpi clear like the origional psd?
View 4 Replies
View Related
Mar 16, 2013
Just downloaded the trial of Video Studio Pro X6 and am trying it out. I have a past background with Adobe Premiere and even VideoPad, so while I'm not new to video editing, X6 is a little different to me. My two main problems at present are sizing and capture.
I'm trying to figure out how to resize clips that are too small, or too large for that matter, to the mpeg2 standard of 720P (16:9) I usually use. When I put...say...a 640 x 480 clip or still on the timeline there seems to be no tool to change their sizes with (that I have found so far). There are 8 squares that sometimes show up on the image, which allow me to resize, but when finished and I go to do something else, the image just pops back to it's original size. So I must be missing something here.
The second main problem I'm presently having is capturing video...which the program won't do. At present, I am capturing analog video through a USB device. When I try to capture, I get an error message telling me that the capture plug-in is already in use, or is missing, or so on. I have discovered on the web that this problem is very common! Why? I have never had a video capture setup on this particular computer before, so there's nothing on it to interfere with X6. So should I assume that the capture plug-in is not included with the trial? Can this plug-in be downloaded by itself?
View 4 Replies
View Related
May 26, 2007
An A4 Aiptek tablet is roughly the same price as an A6 Wacom.
someone who had bought an Aiptek based tablet that did not work.
View 3 Replies
View Related
Sep 12, 2004
I need to print large photos on a small printer and then mount them together on a large board, but no matter how I do it I seem to get either overlap of gaps between the printed photos. I found a good way to mount the photos so the edges of the paper are not too visible (from a distance), but I can still see gaps and overlays. The Photo image has a width of 24 in by 33 in. I'm trying to print it on nine (9) 8X11 papers.
View 2 Replies
View Related
Nov 12, 2005
I have a photo that I copied from an Power Point Presentation which looked great on Power Point but when I have it in PS I noticed that the image size is just 2.507x1.028 with a res. of 576. Pixel Dimensions are 2.45M
I would like to print out a larger version of this photo but I'm not having much luck with it. It gets blurry when I try to enlarge it.
It was on Power Point as PNG graphic and I saved it to the desktop as a Gif andthen dragged it into PS.
Don't know much about Power Point maybe there is a better way to transfer pics from it.
View 4 Replies
View Related
Feb 23, 2013
How can I make the width of a stroke vary in width from large to small like in the attached image on the left side of the cloud?
View 3 Replies
View Related
Mar 31, 2012
I'm trying to make an image 879X593 px into a banner about 950 x 130 px. Is this possible to do this in Photoshop without causing the image to stretch or distort the items inside it? Are there other options even in Fireworks?
View 2 Replies
View Related
May 4, 2008
I am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
View 4 Replies
View Related
Apr 8, 2014
I am having a problem placing large .tif files that have both LZW compression and IBM PC byte order.
View 7 Replies
View Related
Jul 19, 2012
I am using version CS6, I would like to know if there is an easy way to import a MS word document into InDesign. The document is about 1000 pages and contains text, images and tables.
View 14 Replies
View Related
Oct 4, 2013
I have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
View 3 Replies
View Related
Apr 11, 2012
I am struggling with creating and maintaining Tables in a DTP project for a client. I am using Photo & Graphic Design 6, though I'd upgrade to 7 if it would solve my Tables problems.
I have created a table of organized text in Word, and then copied it. I pasted it into Xara, choosing EMF as the only one that really looked like what I created. And now I cannot work with it as a table! Nor can I find anything that easily creates a table for me in Xara. Creating and formatting tables seems to be a very basic kind of feature necessary for DTP. Have I missed something?
I have gone too far into this project using Xara, so I must finish it using Xara and not another product now.
I need to be able to have it move from page to page inline, not as an image, but as a table, when I insert new client text before the table. I also need to resize it without resizing the text. Did I make a mistake using Xara for a DTP project? Or maybe I just missed seeing how to handle Tables properly?
View 7 Replies
View Related
Feb 17, 2014
I have a document for a book with 1400 superior note numbers in it. At the end of the document is a list with the 1400 connecting note texts. Unfortunately they are NOT connected! How can I connect the note-numbers with their connecting note text?
View 1 Replies
View Related
Mar 22, 2013
I was wondering if I'm able to create two tables in an iassembly, like one table for size and another for different components in the same assembly.I have a vague memory of an old assembly having this but I can't find it or it's just a figure of my imagination.
View 4 Replies
View Related
Nov 26, 2012
I am trying to create calendar pages in CS5 and am wondering if there is an easy way to create 7 x 5 block text tables.
View 5 Replies
View Related
Feb 4, 2014
I'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies
View Related
Sep 13, 2012
We have a computer that using AutoCAD Architecture 2013 and Acrobat 9 Standard. When printing a large sheet (30"x42") with images in it to a PDF the images do not appear in the newly created PDF. However, if the same file is printed to fit an 11x17 the images display correctly. Any thoughts as to why the large sheet size is not printing properly?
View 1 Replies
View Related
