removal of small objects in a drawing. I made with ArcGIS a map of the Netherlands. Because it is a detailed map, it also becomes heavy and my computer slows down. I merged some smll elements together with the pathfinder-unite command, but it is still to heavy. So I have to delete some other elements. The problem is that I want to get rid of all the small objects, but I dont know how to select them. It is a topograpic map with for example houses, lamp post et cetera, but I actuallly need only the build areas.
How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
I am running Illustrator CS6, and I have found that Illustrator lags a lot when I have multiple objects that are very small. For example, for my school project I am creating four seasons, and I have multiple leaves on the trees, but since they are very small and I have multiple copies it slows Illustrator down siginificantly. What I am trying to figure out is if there is a way to reduce the quality of the artwork, so that It can run fast when I need it to. Below is a link to download the file, so you can see what I mean. Right now it lags when you zoom In/Out or if you try and move the object. Also, my computer Specs are listed below
For the most part, it loads files very quick but after making multiple copies of files its starts to really lag a lot. The download link is below [URL] ....
I can't seem to move objects in my drawing small distances..I'm used to being able to do this..must be some setting I hit, but I can't find which one it might be. I have snap to off, but this isn't behaving like snap to..it's behaving like I'm only "allowed" to move objects certain distances; any smaller and the object simply doesn't move at all..
Somehow I've managed to disable a feature in Illustrator CS6 that does two things: 1) it causes a small box to follow the cursor when I'm drawing an object 2) the light green lines or x's are gone now, too. How can I get them back? Are they only visible under certain circumstances?
I'm looking for any options that could remove the hidden sections over numerous overlapping objects. I have plenty of objects that lay over each other in this design, and now my client is thinking about getting it screen printed. Is there a shortcut for this that would save me a mass amount of time? (other than using Pathfinder on each and every one?)
I want to try just putting a small stroke that goes around the outside of the drawing, however when I do select all and apply the stroke, it obviously strokes the inner parts of the drawing (for instance the mouth, eyes, dimples, etc). I've tried merging all of the layers, but it doesn't work.
When exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working". I get the error message that it has stopped working and it closes. No chance to save work in other drawings open at the time. I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings. It does not crash every time but several times a day.
I have my grid set to 10px (with subdivisions set to 1). Snap to Grid is enabled. I had "Align New Objects To Pixel Grid" checked when I created the document.
When I draw an object, it will snap to the 10px grid as I am drawing it. However, when I go to move the object around, it will not snap to the grid at all. In Photoshop and Fireworks, this was a piece of cake, but in Illustrator I've never been able to get this to work, nor find a solution for it. The only way I can kind of get it to work is to set my grid to 1px, but I really don't want to be zooming in that far constantly when moving things around.
For what it's worth, this is happening in Illustrator CC, but I've had this same issue with older versions as well.
I'm working with objects big from 10 to 100 centimeters. When i use ctrl+alt+mmb to zoom, or the magnifying glass, it's too sensitive and hard to zoom in/out. How to solve this?
Drawing A has a grid system Xref-ed into it. It also has a block reference in it, repeated in various places throughout the drawing.
I Xref-ed the grid into the block to check something, and now I can't get it out. This means that the grid now repeats all over Drawing A as well and is generally being a nuisance.
If I try to unload the Xref within the block, it unloads it in Drawing A too. If I try to detach it from the block, it returns this message: Xref [Xref name] has multiple references. Not detached. If I try to detach the Xred from Drawing A, it returns the same message.
How do I unload the same Xref that occurs in a block in a drawing, and in the drawing itself, independently of each other?
The four squares all have a 0px top and bottom Push Margin set, which I would have thought would have meant I could have butted them up directly next to each other (but not overlapping).
However you can get them very close but not touching.
I usually create models in Inventor and import into Max for rendering. One particular model that I am creating has a small section which is a pit containing a pile of coal. Is there a quick and easy way to model a pile of random sized small objects such as coal, balls etc. in Max?
I want to remove the focus of my picture to put it into another picture. Is there a way to do this without cropping around it? (ie: A tool that removes a specific colour/colours?)
I've been looking for a tutorial I saw some time ago dealing with removing objects from photos, such as people or vehicles. It was a round-about technique, but seemed to work really well. Unfortunately, I can't find again, thought maybe someone here might know the technique, or know of the tut.
If I remember right, it wasn't something simple like the lasso or magic wand. It seems that it had to do with duplicating and inverting, then from there you could make the selection of the object you wanted to remove, and it made a much, much cleaner selection, and looked very natural when it's moved to another background.
Take for instance, a woman with long hair blowing in the wind. This technique selected all of the person, hair included, but left out the background, including the background that shows through strands of hair. I found this technique was much cleaner than other methods, and am hoping to find it again.
I am a surveyor doing an asbuilt of some ponds. I am working in the engineer's dwg. In PS, he does not scale down his drawing sheet block to 1"=1', he keeps it the same scale as model space, i.e. 1"=50'.
He has a viewport in the layout, and my Cogo Points seemed to be scaled at 1"=1', which makes them much to small, but everthing else is scaled correctly.
How can I make my Cogo Points appear bigger in PS?
I tried dbl-clicking in the viewport to be in MS, and the viewport says it's scale is 1'0" = 1'0". When I change it to 1"=50', the model view shrinks way down (the viewed area is bigger), and when I scroll to make the model view bigger, the Cogo Points are still small.
When I read the Properties of the viewport, it says:
Anno scale: 1"=50 Standard scale= 1"=50 Custom scale= 0.02
How I can get this viewport to make my Cogo Points big as they should be?
I like this image if only I could remove the branch. Also what is that called in the lower right hand corner? Is that aberration? Could that be removed by GIMP as well?
I want to get Lightroom 4 and I think I read somewhere that instead of having to erase and clone unwanted objects in a photo, one could click on object and remove it and the computer would fill in the background to what it should have been. Ex: photo of a church with light pole in front. click on pole, it disappears and what is behind the pole is pictured without the pole in front. I saw this a few months ago when a friend sent me the info. Cost of software then was about $199. Now I cannot find that feature listed and also the price is much cheaper so not sure which software.
I was working on a self project and I have text finally set in the right place, but when I remove the outside box, my text disappears as well. I need to find a way to leave only the text on my document and be able to remove everything else.
I need to remove lines from a block definition and replace them with LWpolyLines. I see there is a way to Append entities to a BlockTAbleRecord but I don't see a way of removing an entity.
I have a questions about deleting/removing all objects from specific location. For Example I want to remove objects from Location X 0,0 Y 0,0 Z 0,0 but keeping all other objects untouched.
Is there a way to do that ?
Also you may ask why do I need that, well it's because I have a lot of objects in one scene which causes a lot of lag and my exporting had some problems, which caused to every single object to copy themselfs to the middle of the scene, but all the original objects not copied objects are already in place and I don't want to remove them. I want to only remove duplicated objects. I'm using 3ds max 2012 64-bit on Windows 7 Ultimate SP1
I photograph beach weddings. In my old software, I could remove swimmers and bathers, how in elements12? I am trialing it and cannot see any way to easially remove unwanted objects
I recently upgraded to Civil 3D 2013. I am regularly crashing when I pick objects, usualy in the erase command, then type "r" to remove some of the objects. After I've picked the objects to remove and hit enter I get a fatal error. This is happening in several different drawings so I don't think it's drawing specific. Today it happened with the stretch command. I'm not sure if it's happening everytime I remove objects but if not it's quite often. A co-worker said he has noticed the same thing.
Windows 7 x 64 Intel i7-4770 CPu @ 3.40 GHz 24 GB RAM NVIDIA Quadro K2000D Civil 3D 2014 (i.108.0.4, SP1)
I have a stock photo of an item I want to sell but the picture shows some accessories I don't have so how do I remove these items and replace the space with the background. There are no layrers in the photo
I have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?
I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.
I have a block that contains attributes. When I select the block, you can see all the nodes/insert points from the attributes within the text. I was wondering if there is anyway to have the block only show the insertion point of the block and not the attributes? The attached image shows what I am talking about.
I haven't been doing graphics for a few years and are having trouble getting Xara Extreme to export a small drawing with a transparent background. I am selecting the image in Xara, Export, Save as .png, True color + alpha, Save
