Photoshop :: Removing Objects

Dec 1, 2006

I want to remove the focus of my picture to put it into another picture. Is there a way to do this without cropping around it? (ie: A tool that removes a specific colour/colours?)

View 2 Replies


ADVERTISEMENT

Photoshop :: Removing Objects

May 27, 2004

I've been looking for a tutorial I saw some time ago dealing with removing objects from photos, such as people or vehicles. It was a round-about technique, but seemed to work really well. Unfortunately, I can't find again, thought maybe someone here might know the technique, or know of the tut.

If I remember right, it wasn't something simple like the lasso or magic wand. It seems that it had to do with duplicating and inverting, then from there you could make the selection of the object you wanted to remove, and it made a much, much cleaner selection, and looked very natural when it's moved to another background.

Take for instance, a woman with long hair blowing in the wind. This technique selected all of the person, hair included, but left out the background, including the background that shows through strands of hair. I found this technique was much cleaner than other methods, and am hoping to find it again.

View 2 Replies View Related

Photoshop Elements :: Removing Unwanted Objects

Feb 11, 2014

I photograph beach weddings. In my old software, I could remove swimmers and bathers, how in elements12? I am trialing it and cannot see any way to easially remove unwanted objects

View 1 Replies View Related

Photoshop Elements :: Removing / Replacing Objects In A Photo?

Sep 1, 2013

I have a stock photo of an item I want to sell but the picture shows some accessories I don't have so how do I remove these items and replace the space with the background. There are no layrers in the photo

View 1 Replies View Related

Photoshop :: Removing Objects On Tricky Background (content-aware Fill Fails)

Feb 25, 2012

I often need to remove larger objects like this AC grille sitting on a plain coloured wall:
 
The brightness of the wall varies over the affected area. There are subtle gradients in both horizontal and vertical direction, so a flat colour fill doesn't work. Content-aware fill produces an unusable patchwork of bits randomly picked up from the surroundings.
 
So most of the time I've ended up by filling the areas with a flat colour and then using the patch tool repeatedly on smaller overlapping areas to smoothen things.
 
I'd want an automated way to create a non-linear gradient to match the areas adjacent to the selection.

View 4 Replies View Related

GIMP :: Removing Objects From Image

Jul 8, 2012

I like this image if only I could remove the branch. Also what is that called in the lower right hand corner? Is that aberration? Could that be removed by GIMP as well?

View 4 Replies View Related

Lightroom :: Removing Objects In Photo

Nov 10, 2012

I want to get Lightroom 4 and I think I read somewhere that instead of having to erase and clone unwanted objects in a photo, one could click on object and remove it and the computer would fill in the background to what it should have been. Ex: photo of a church with light pole in front. click on pole, it disappears and what is behind the pole is pictured without the pole in front. I saw this a few months ago when a friend sent me the info. Cost of software then was about $199. Now I cannot find that feature listed and also the price is much cheaper so not sure which software.

View 1 Replies View Related

CorelDRAW X5 :: Shaping Text And Removing Outside Objects

Aug 30, 2012

I was working on a self project and I have text finally set in the right place, but when I remove the outside box, my text disappears as well. I need to find a way to leave only the text on my document and be able to remove everything else.

View 1 Replies View Related

AutoCAD .NET :: Removing Objects From Block Definition?

Dec 21, 2011

I need to remove lines from a block definition and replace them with LWpolyLines. I see there is a way to Append entities to a BlockTAbleRecord but I don't see a way of removing an entity.

View 2 Replies View Related

3ds Max :: Deleting / Removing All Objects From Specific Location

Mar 6, 2012

I have a questions about deleting/removing all objects from specific location. For Example I want to remove objects from Location X 0,0 Y 0,0 Z 0,0 but keeping all other objects untouched.

Is there a way to do that ?

Also you may ask why do I need that, well it's because I have a lot of objects in one scene which causes a lot of lag and my exporting had some problems, which caused to every single object to copy themselfs to the middle of the scene, but all the original objects not copied objects are already in place and I don't want to remove them. I want to only remove duplicated objects. I'm using 3ds max 2012 64-bit on Windows 7 Ultimate SP1

View 1 Replies View Related

Illustrator :: Removing Small Objects In Drawing?

Feb 19, 2013

removal of small objects in a drawing. I made with ArcGIS a map of the Netherlands. Because it is a detailed map, it also becomes heavy and my computer slows down. I merged some smll elements together with the pathfinder-unite command, but it is still to heavy. So I have to delete some other elements. The problem is that I want to get rid of all the small objects, but I dont know how to select them. It is a topograpic map with for example houses, lamp post et cetera, but I actuallly need only the build areas.

View 2 Replies View Related

AutoCAD Civil 3D :: Crash When Removing Objects From Selection?

Jun 20, 2012

I recently upgraded to Civil 3D 2013. I am regularly crashing when I pick objects, usualy in the erase command, then type "r" to remove some of the objects.  After I've picked the objects to remove and hit enter I get a fatal error.  This is happening in several different drawings so I don't think it's drawing specific.  Today it happened with the stretch command.  I'm not sure if it's happening everytime I remove objects but if not it's quite often.  A co-worker said he has noticed the same thing.

Windows 7 x 64
Intel i7-4770 CPu @ 3.40 GHz
24 GB RAM
NVIDIA Quadro K2000D
Civil 3D 2014 (i.108.0.4, SP1)

View 9 Replies View Related

Illustrator :: Removing Hidden Sections Of Several Overlapping Objects

Dec 19, 2012

I'm looking for any options that could remove the hidden sections over numerous overlapping objects. I have plenty of objects that lay over each other in this design, and now my client is thinking about getting it screen printed. Is there a shortcut for this that would save me a mass amount of time? (other than using Pathfinder on each and every one?)

View 2 Replies View Related

AutoCAD Civil 3D :: Removing Projected Objects From Multiple Section Views

Jun 19, 2012

I have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?

I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.

View 1 Replies View Related

AutoCAD 2010 :: Removing Nodes / Insertion Points From Objects Within Blocks

Dec 5, 2013

I have a block that contains attributes. When I select the block, you can see all the nodes/insert points from the attributes within the text. I was wondering if there is anyway to have the block only show the insertion point of the block and not the attributes? The attached image shows what I am talking about.

View 4 Replies View Related

AutoCad :: Removing Xref From Block Without Removing It From Drawing Block?

Dec 22, 2011

Drawing A has a grid system Xref-ed into it. It also has a block reference in it, repeated in various places throughout the drawing.

I Xref-ed the grid into the block to check something, and now I can't get it out. This means that the grid now repeats all over Drawing A as well and is generally being a nuisance.

If I try to unload the Xref within the block, it unloads it in Drawing A too. If I try to detach it from the block, it returns this message: Xref [Xref name] has multiple references. Not detached. If I try to detach the Xred from Drawing A, it returns the same message.

How do I unload the same Xref that occurs in a block in a drawing, and in the drawing itself, independently of each other?

View 1 Replies View Related

Photoshop :: Compare Number Of Pixels Or Diameter Of Objects Across Images For Each Of 10 Objects

Apr 15, 2013

I am currently selecting 10 objects from a picture and then I delete the background. This leaves just the 10 objects of interest in the image.
 
I have hundreds of these images and would like to compare the number of pixels or diameter of the objects across the images for each of the 10 objects. Is there a way I can automate Photoshop to go through a directory of images and measure the pixels of each of the 10 objects, and then export those measurements to a file?

View 29 Replies View Related

Photoshop :: Texturing Certain Objects Onto Other Objects

Jan 23, 2004

Im wondering how to texture say a face with a motherboard, so that the motherboard takes the shading and everything of the face.

View 1 Replies View Related

Corel PHOTO-PAINT X6 :: Why Combine Objects Together Cut Bottom Side Of Combined Objects

Nov 27, 2012

Why combine objects together cut bottom side of combined objects?

system configuration:

Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.

corel version:

X6 VERSION: 16.4.0.1280

View 14 Replies View Related

AutoCad :: Size And Shape Of All Objects Connecting The Objects To The Main Structure

Nov 22, 2012

I am very much new to AutoCad, but have learned quite a bit about it in the last few days. As a part of the learning I have been building a 3D model of the shed my dad is building. But I ran into a problem on the roof and cant seem to figure out how to click everything into place.

My problem: I need to keep the size and shape of all objects while also connecting the objects to the main structure. I need to keep A and B connected to the main structure and adjust the angles so that both meet at C. But if I move one then another moves out of place. (In the pic B is out of place) All I want to do is hold the beams at A and B in their spot while adjusting the rotation on both beams to meet at C all at the same time. I have tried to fine adjust the rotation on the beams individually but still cant get them together. I cant seem to get the constraints feature to work, because I guess it only works in 2D. I have tried to use the align tool but it just throws everything haywire.

View 6 Replies View Related

Illustrator :: Can't Scale Objects / Requested Transformation Would Make Some Objects Too Small To Use

Jul 26, 2012

How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Vector Objects Behind Transparent Objects Turns Into Bitmaps When Exported

Aug 18, 2011

I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.

Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.

View 14 Replies View Related

AutoCAD VB :: Converting AttributeDefinition Objects To Text Objects On Same Layer

May 9, 2013

I have several .dwg files that I use as templates. I run find and replace VBA routines on the template .dwg files, ie find $Flavor$ and replace it with "Grape", and then I save the .dwg to another directory with a new name. 

These VBA routines work well for acdbText and acdbMText objects, but I have a bunch of AcdbAttributeDefinition objects in the .dwg templates as well.

After much research about the AutoCAD object model (I'm mostly a Microsoft Access VBA programmer), I have come to understand that these AcdbAttributeDefinition objects are actually "remnants" of a block that no longer exists in the drawing.

Anyway, I'd like to convert all of these orphaned AcdbAttributeDefinition objects to acdbText objects in the templates and then delete the AcdbAttributeDefinition objects. I have some code that does just that.

However, the issue that I am having with the code is that the newly created acdbText objects are not on the same layer that the original AcdbAttributeDefinition objects were on. I don't know the syntax to identify what layer the AcdbAttributeDefinition object is on or how to specify what layer on which the acdbText object is created.

how to keep the acdbText objects on the same layers as the original AcdbAttributeDefinition objects during the conversion and deletion process?

Here is the code I am using currently:

Sub AttConvert(dwg as string)Dim oDocument as AcadDocumentDim ent as AcadEntityDim aa as objectset oDocument = Documents.open(dwg) For Each ent In oDocument.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then' DO SOMETHING TO IDENTIFY WHAT LAYER THE ACDBATTRIBUTEDEFINITION OBJECT IS ON
' DO SOMETHING TO SPECIFY THAT THAT IS THE LAYER TO CREATE THE ACDBTEXT OBJECT ON Set aa = ThisDrawing.ModelSpace.AddText(ent.TagString, ent.InsertionPoint, ent.Height) End If Next ent For Each ent In ThisDrawing.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then ent.Delete End If Next ent End Sub

View 1 Replies View Related

AutoCAD 2010 :: Aligning Objects In Modelspace With Objects In Paperspace?

Apr 10, 2012

I'd like to know how to align an object in model space with the edge of my viewport in paperspace.

When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?

View 4 Replies View Related

AutoCAD 2013 :: Select Objects Not Showing How Many Objects Found

May 2, 2013

A user is having problems when using the copy command in AutoCAD 2013.

When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...

I've tested it on my machine but i cannot replicate the issue and have never come across this before!

Is it a bug? Is it a variable? User setting etc.

View 9 Replies View Related

AutoCAD 2010 :: Selecting Objects BEHIND OR INSIDE Other 3D Objects

Jul 3, 2013

Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?

View 1 Replies View Related

Photoshop :: Removing Red Eye

Jun 25, 2004

I have big, fancy, Photoshop 7.0 and I'll be damned if I can figure out how to do some simple redeye removal. The whole thing is really over my head, but I'm a musician trying to clean up some photos with redeye.

View 9 Replies View Related

Photoshop :: Removing CS3 After CS4...

Oct 25, 2008

After installing the CS4 upgrade on my Vista 32-bit machine I went to uninstall CS3. The procedure ended up with the red crosses and an error message stating that CS3 and components could not be removed.

Having deactivated CS3 I tried once more with the same result.

I would appreciate any advice on how best to proceed to uninstall CS3 whilst ensuring I don't screw up my CS4 installation.

View 2 Replies View Related

Photoshop :: Removing CS3

Oct 28, 2008

I just installed the CS4 upgrade and am trying to save HD space on my laptop.

Will there be any effects if I remove the old program?

Do I de-activate it first?

View 13 Replies View Related

Photoshop :: Removing CS2

May 18, 2008

I'm running Photoshop CS3 as an upgrade from CS2 using XP Pro, In order to use some third party software I was advised to remove CS2 or the software would not work. But when I did so I found that some of CS3 was compromised as a result. For example, in Bridge I could no longer double click on an image to load it in PS.

Since my CS3 is an upgrade, is it sharing some common files with CS2? And if so, how do I remove it without removing the essential files. And if my CS3 it is not sharing files with CS2, what can I do to remove the latter without messing up the former?

View 2 Replies View Related

Photoshop :: CS5 - Removing Someone From Photo

Jul 4, 2011

I sadly do not have Photoshop C5 so can not easily remove someone from photos. I tried the cloning tool to just place the background over the person to be removed but it doesn't look very nice. (I'm just starting to use Photoshop).

It is a lake scene and the person to be removed is on the far right, not in the middle of a group or anything.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved