I have a block that contains attributes. When I select the block, you can see all the nodes/insert points from the attributes within the text. I was wondering if there is anyway to have the block only show the insertion point of the block and not the attributes? The attached image shows what I am talking about.
View 4 RepliesI am trying to use the DIVIDE command but can't see the points (nodes) it creates after the command is complete. I have the OSNAP setting on to snap to nodes which I can't even see. The QSELECT command let me see that they are indeed in the drawing, and that is the only way I can select them.
View 1 Replies View RelatedI have numerous text objects I want to rotate 180 while retaining each text objects insertion point. There's got to be an easy way to do this.
Long explanation: I created an annotation template to label pipe diameters on an imported shapefile. Everythings good, labels are parallel with lines, except for the fact that some labels are upside down. Is there an expression that would eliminate this? In my annotation template, my rotation expression equals the "angle" field of the object. My "quick and dirty" fix was to burst the annoation labels, and manually rotate necessary text, which wasn't a huge headache since I'm dealing with a relatively small number of labels, but in the future I might have hundreds of upside down labels.
I have several script commands that insert items such as title blocks (xrefs) and page boundaries (blocks). The base point and INSBASE for all files are set to 0,0,0. However the blocks will occassionally come in at different positions. In some cases I can repeat the command multiple times and each time the same block will inset at a different position in the same drawing even though the insert point is set to 0,0,0.
Autocad LT 2012
I’m currently working on getting a system for easier plant layout management. Part of which is condensing what started as 195 mostly random layers into about 15 usable layers.
Problem:
I have about 28 more layers that need to get rid of and I can’t delete them because there are lines assigned to them. However, when I hide all the layers I need so that only the unnecessary layers are showing, there’s nothing there.
Side Note:
I know this problem is most likely because there were layers applied to features deep within blocks. I just don’t want to go through the 700+ block to check each layer assigned to each line.
(This file I was given to start with is a mess. Examples: Some of the blocks have the same exact feature that’s buried 7 blocks deep with no features added to justify an extra bock being there. Some of the blocks aren’t even being used in the layout. Name of the block has no coloration with the actual thing it represents. Stuff like that…)
Question:
Is there a way of hunting down these layers in the blocks to delete / change them without checking each individual block? Or is it possibly because the layer i need to get rid of is applied to a block that’s not being used in the layout?
I need to bust a floor plan up into 4 quadrants. Just so I don’t do anything to the original, typically I will copy the plan from one starting coordinate to my “construction document”, or working construction lines. Once I’ve made the copy, I typically use the construction line as a “Quadrant Marker” for match-lines, etc., etc., etc… My problem is that I cannot remove the construction lines from the new copy that I’ve made. Not only that, if I move the copy, or delete the copy, the construction lines now seem to be a part of the “new drawing”. The “Grip” is also listed as a “Constraint”.
“This Does Not Happen With AutoCAD2008, or Earlier Versions” so What is Wrong, or so Different with AutoCAD2011, or Later?
Is there a special snap setting to snap to a point/node? I'm not talking about a endpoint or midpoint or anything like that. I mean a "node" that is set with the "POINT" command. I can't snap to any nodes I create.
View 3 Replies View RelatedI cant start drawing an object from anywhere else( ie. inside a grid) except form the points where grid lines intersect. How do i go back to old system? I need to get some work done fast.
View 2 Replies View RelatedI am trying to add the measure command which adds nodes / points to what I select to the tool bar and it wont let me do it when I select it out of the commands search box.
View 3 Replies View RelatedI am trying to create a tool that looks similar to Line in Autocad. I got the solution for dynamic multiple insertion points but the issue is the line is only visible after the end point is selected. But i want the line to be visible before selecting the end point, this should be as same as the line we use in autocad. Following is the code i used to create a line with multiple insertion points.
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurEd As Editor = acDoc.Editor
Using lock As DocumentLock =
[Code]....
I imported survey data and had auto lines drawn. then I rotated my points/nodes. -- how do i get my linework to update?
View 4 Replies View RelatedI working with a LISP program which creates some assembly drawings on the fly. For certain parts of the drawing I INSERT other dwg files which of course become blocks. Once in the drawing the users are sometimes wanting to edit the drawings where the blocks are, which makes an explodeable block necessary. But since the drawings are not actually blocks until they are imported this is not an easy thing to resolve. The other thing to keep in mind is that this drawing process is completely automated. The user does not get a chance to interface with it until the drawing is complete. So asking the user to do something as the drawing is being created will not work.
View 4 Replies View Relatedhow I can quickly add points at the insertion point of a block? I have over 1400 and would like to find the quickest way to do it.
View 7 Replies View RelatedMy surveyor gave me a topo survey done in no particular coordinate system. He set up his total station on a PK nail and gave it a coordiante of (5000, 5000, 100). I used this survey to generate a surface.
I also have a site survey of the same site, done in state plane coordinate system. the two surveys have mulitple common points; pk nails, iron pins ect.
What i need to do is move the points for the topo survey over to the survey that is in state plane. A simple move command will not do this.
How do i go about moving these points to thier correct location without having to manually edit the .txt file?
I can't seem to remove nodes from the Matte Blender by holding down the "Control" & "Option" keys as stated in the online tutorial.
View 2 Replies View RelatedIs there a system variable that controls being able to view a block during insertion? Currently I cannot see the block I am trying to insert on the cursor to see where I will be inserting it.
View 5 Replies View RelatedI have a simple block, I would like to do the following:
Type: Insert
Specify: Block Name
Click spot with cursor to have the block placed
Rotate the block for orientation
I know that if I use the Tool Pallets I can specify rotate on insert, but do not always want to use the Pallete. I also know I can assign a rotation parameter to the block so I can grip and rotate after insertion. Is there an easier way?
Currently, I have the base or insertion point of some of my blocks in an undesirable spot and I would like to move it. When I insert a drawing or block I have difficulty in placement due to a poor choice in the drawing or block I am trying to insert.
View 6 Replies View RelatedI created a dynamic block with a polar stretch. I insert the block, then have to select the grip to rotate/stretch it. Can it be inserted and then rotated/stretched all in one action? The insertion point is at one of the line and the polar stretch grip is at the other end.
View 3 Replies View RelatedSo a file sent to us was created in AutoCAD Map 2007 and we run AutoCAD MEP 2012 (and some on 2011). A Device ID Block was inserted in the Map program at 1:40 Annotative scale and was fine in their software, but when we load the files the attributes are enlarged to 40x their intended size. There are over 1,000 of these block in the plans and I've run out of solutions. I tried overwriting the block and it failed, and I also tried copying the oversized blocks into a file with the block predefined and that failed as well. At this point I am convinced I need to find or write a lisp for the repeated actions. I am crunching on the process for writing the lisp as I have written macros and VBA Functions for excel and understand the basic principles.
View 1 Replies View RelatedI have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
would like to set a base point during insertion of one block.When not insert by AutoLISP, just type "b" to be able to change the base point.
But when I'm using an AutoLISP that inserts a block, it does not work, it interrupts the sequence of routine.
Lisp:
(defun c:carrobox()(setq #clayer (getvar "clayer")) (if (= unidades nil)(setq unidades "cm")).....
Where can I find the command to globally scale blocks by selecting them and it scales each block around its insertion point.
View 3 Replies View Relatedis there any way that Autocad can have multiple items placed on the clipboard for insertion use like the Microsoft Office Word programme has (up to 24 inputs). This would be a good feature to allow going to one file, copying what you need and then switching to your current drawing file and placing them as needed
View 6 Replies View Relatedhow (if) I can set up my dynamic blocks so that I can set the parameter values as I insert the block, rather than with the grips afterwards?
To take a simple example; I have a block consisting of a rectangle, with 2 linear stretch parameters - length, width. Can I set it up so that when I insert the block, it asks for the length and breadth,just as it would for attributes.
I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies View RelatedThe AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
I am trying to hook some nodes of a curve to other objects. Looks like Spline IK Control modifier is a best thing for that and works great.
My only problem is that when I need to make a copy ( not instanced) of the whole curve and hooked objects the curve unhooks of those objects and switches to it's original shape.
For example I need to make a group of telegraph posts connected by wires and then copy that whole group to another place,. All the wires turns into a mess.
Is there anything I am missing? I am accustomed to use similar "hook" approach in Blender and curves stay intact there. Should I use some other way in 3dsmax?
Any easy way of removing points from a hatch other than recreating the boundary with an associated polyline and editing the polyline?
View 2 Replies View Relatedddddd.JPG
I'm working in Corel Draw 12 and I have a problem to connect two nodes of different lines which aren't the nodes at the beginning or end of the lines. That problem I've solved, (by selecting both lines, then using function combine, selecting for e.g. starting node of first and ending node of second line and joining them) but I really have hard time making this out. The function join isn't apparently working for nodes in the middle of the lines.
what absolute points and relative points are in AutoCAD. What is the difference?
View 8 Replies View Related