AutoCAD 2010 :: Objects Attaching To Construction Points?
May 16, 2013
I need to bust a floor plan up into 4 quadrants. Just so I don’t do anything to the original, typically I will copy the plan from one starting coordinate to my “construction document”, or working construction lines. Once I’ve made the copy, I typically use the construction line as a “Quadrant Marker” for match-lines, etc., etc., etc… My problem is that I cannot remove the construction lines from the new copy that I’ve made. Not only that, if I move the copy, or delete the copy, the construction lines now seem to be a part of the “new drawing”. The “Grip” is also listed as a “Constraint”.
“This Does Not Happen With AutoCAD2008, or Earlier Versions” so What is Wrong, or so Different with AutoCAD2011, or Later?
I have a block that contains attributes. When I select the block, you can see all the nodes/insert points from the attributes within the text. I was wondering if there is anyway to have the block only show the insertion point of the block and not the attributes? The attached image shows what I am talking about.
I am preparing 3D model of a 354 acres campus area. I am using AutoCAD Map 3D 2011. I have extruded all the building as AutoCAD drawing objects. I have also imported DEM of the area into AutoCAD. Now, how can I use this DEM to specify the Earth surface elevation or surface profile of my 3D building models so that all my 3D buildings read the Earth surface profile information from DEM.
I cant start drawing an object from anywhere else( ie. inside a grid) except form the points where grid lines intersect. How do i go back to old system? I need to get some work done fast.
Over the years, I've used a combination of Xara and MS Visio for business graphics -- Visio primarily for "boxes and arrows" work given the ease of typing text into any object.
I just spent a few minutes with my new version of Designer Pro X hoping that functionality might have been added and that I could finally eliminate Visio. I didn't see any new text-to-object function, but thought I'd ask here just in case.
I remember there is a way to attach text to a Xara object but couldn't find the instructions.
I'm having trouble with a high poly model. It's too big for my system right now to use in a complex scene, so I want to use a MR proxy to instance it. However the model I have(I wasn't the modeler) is composed of a lot of objects, more than I'm willing to make a proxy for. I tried to make a group out of them and make that a proxy but that doesn't seem to be possible (MR proxies can only store 1 object?)
So my next step was to combine them into one object via attach, however when I do that the smoothing gets really screwed up (see attached jpgs). Any tips for keeping smoothing per object as I add them?
I have conducted a level survey on site and once I have loaded it in to aurtocad I need to copy them on to a drawing so can tell where abouts the level are in relation to the site. When I have done this I copy with base point and paste with coordinates but it comes up tiny compared to the drawing.
Currently there are a total of 3 viewports in an L formation. The fourth viewport, will go in the upper right. But first, I have to get these aligned.
I think the viewports themselves are fine enough. The problems arise because the model is in Model space so, construction line (as far as I can tell) didn't want to snap to a line, (on the model,) in Paper space.(vertical or horizontal) So, I can only see the construction line, in one viewport at a time. Which means, the construction line is not visible in the viewport immediately to the left. So, I can't extend the construction line across both viewports, to to snap them to the construction line.
Is there any way of getting ALL objects a Line/ray intersects with?
I am thinking of something like:
*Pseudocode* Ray ray = new Ray();ray.To = dest;ray.From = start; ray.Fire();var obj = ray.GetFirstHitObject(); /* or null if nothing */// continue here //
I don't even need the object, a simple true if it hits something, or false if not is enough for me.
I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
Possible to view the control points of a 2d or 3d object. I know that we can view the control points for spline objects, but is it possible to view the control points also for every other object i draw?
What might be the cause of a several moment delay when selecting objects and/ or their grip points. It doesn't occur when a command is entered first. The longer a drawing is open the worse it seems to get. Is there any fix or adjustment that can be made?
This problem has just started to occur and frankly, I'm totally stuck. When I created 3d objects to represents conduits runs in a building, they worked fine. However, when I saved and reopened my file, the objects are shown in different locations, yet their snap points (endpoints, midpoints, arcs, etc) are shown in the correct location. I have attached an image showing what I mean to clarify. I am using Autocad 2014 and Civil 3D 2014.
Trouble with embedded OLE DWG objects in word 2010 not opening with AutoCAD 2012
We have a user that can't open some OLE DWG files from within a word document. He had 2010 AutoCAD LT on his machine for a while then was upgraded to 2012 AutoCAD (non LT) once that was there LT 2010 was unistalled. since then he has not been able to open certain embedded OLE files within Word. Other users that have other ever had AutoCAD 2012 have no issue opening this embedded DWG files.
i found this thread (URL....) which sounds exactly what is going on with my enduser. But the fix provided is for AutoCad 2000-2012 not the LT versions.
I am using autocad 2013 primarily and other employees are using 2010. I am saving my drawings as 2010 and for me there are no issues. On the other hand people using 2010 are having objects missing in the drawing. All layers are turned on and all thawed. The primary objects missing are AEC objects. Is there a switch to show or hide these object?
I have numerous text objects I want to rotate 180 while retaining each text objects insertion point. There's got to be an easy way to do this.
Long explanation: I created an annotation template to label pipe diameters on an imported shapefile. Everythings good, labels are parallel with lines, except for the fact that some labels are upside down. Is there an expression that would eliminate this? In my annotation template, my rotation expression equals the "angle" field of the object. My "quick and dirty" fix was to burst the annoation labels, and manually rotate necessary text, which wasn't a huge headache since I'm dealing with a relatively small number of labels, but in the future I might have hundreds of upside down labels.
I am new to programming in general, but really new to C#. A little to discribe what I want to do.
I need to creat a command that once I run it, I get to choose an excel file that will be filled with points in a D,X,Y,Z format. (points range from 1-??) I know there are other ways of doing this (importing text ascii) but I need to cut down on the time and steps. This is something I do on a regular basis for people to convert different coordinate systems.
how to do the basics right now, I am just having trouble getting to the point that it will pull the info out of an excel file. I do not have any code right now to share to show my progress either.
In previous version you can rotate the UCS around the Z axis by tying UCS Z at the command prompt and then you were prompted to select two points to defin the angle. Now it uses a point at the ucs icon as the first point and only allows me to pick the second point. Is there a way to pick two points to define the UCS angle? I tried setting the UCS Origin to the first point and that did not work.
I am trying to use the DIVIDE command but can't see the points (nodes) it creates after the command is complete. I have the OSNAP setting on to snap to nodes which I can't even see. The QSELECT command let me see that they are indeed in the drawing, and that is the only way I can select them.
For some reason my computer is the only one in my office that is doing this. Whenever something is put on the def points layer I am unable to select it afterwards.
Such things have been:
1) The viewport in paperspace. The view cannot be resized but I can still click inside the viewport and work without problem.
2) Any line, block, etc made or put on that layer.
From what I've read others are saying is your layer 0 locked or frozen? It is not. Also in my layers manager nothing is turned off to make it any different from any other layer.
i have an elevation point layer that i'm using in a project and i needed to import it to arcgis for some interpolation.
Problem is, all altimetric points are "B"s instead of being points, and arcgis doesn't recognize them as points. Is there a way of quickly converting them all of them into points?
Take into consideration that we're talking about hundreds, maybe thousands of said "B"s.
As the topic says, I need to make 2 points in two different objects to stick to eachother, so for example when I rotate a line which is "connected" to a square object in one end, the line will rotate around that point.
Also, if I have lets say two square objects and I "connect" one of the corners of one square object to another corner of another square object, where the points are located exactly on the same location, I need to be able to rotate any of the square objects around the point which is connected to the other square.
