AutoCAD 2013 :: 3D Objects Not Shown Where Their Snap Points Are
Oct 25, 2013
This problem has just started to occur and frankly, I'm totally stuck. When I created 3d objects to represents conduits runs in a building, they worked fine. However, when I saved and reopened my file, the objects are shown in different locations, yet their snap points (endpoints, midpoints, arcs, etc) are shown in the correct location. I have attached an image showing what I mean to clarify. I am using Autocad 2014 and Civil 3D 2014.
View 1 Replies
ADVERTISEMENT
Jul 22, 2013
Is there a special snap setting to snap to a point/node? I'm not talking about a endpoint or midpoint or anything like that. I mean a "node" that is set with the "POINT" command. I can't snap to any nodes I create.
View 3 Replies
View Related
Jul 16, 2012
Can you move an object while using another object's snap points?
View 4 Replies
View Related
Dec 10, 2012
Using AutoCAD Civil 3D 2013, now installing Service Pack 1 (kept crashing, this time it's working though), and I'm trying to find the area of a pathway that I've drawn in 2D with standard lines. Using the area tool, I want to find the area of the path, but it arcs around a 180 degree corner. I tried getting a rough estimate of the area by clicking at several points along each of the arcs, but after clicking a point where the arc joins the straight line of the straight section of the path, it literally won't let me click the next point. I can, however, specify the next point as long as it's nowher near the arc. Same goes for the polyline tool.
Just got an error code for the Service Pack installation, too. "A problem prevented the service pack from being installed, contact your administrator. Error 1603"
View 1 Replies
View Related
Nov 27, 2013
I am trying to use the DIVIDE command but can't see the points (nodes) it creates after the command is complete. I have the OSNAP setting on to snap to nodes which I can't even see. The QSELECT command let me see that they are indeed in the drawing, and that is the only way I can select them.
View 1 Replies
View Related
May 4, 2012
I'm messing around with some commands and I'm currently exploring laylockfadectl/layiso.
They both work just fine of course, but I was wondering if its possible to make ACAD ignore snap points on the locked layers?
View 1 Replies
View Related
Feb 1, 2012
I want to move a few snap points on a line but not all of them... Usually I would shift + click each individual snap point and then move but when I have a lot of points it gets pretty time consuming.
If there was a way to drag select multiple snap points in a line.
View 4 Replies
View Related
Apr 16, 2013
In my application, users will insert predefined blocks which have simple shapes like rectangle,square or circle.
Users will connect some polyline or lines to the blocks inserted. My task is that blocks must have snap points only on their center so that the polylines must be connected to the block center point not to other points such that midpoints, end points of the edges.
I wonder if there is a way to override snap points of the blocks while other entities' snap points do not change.
View 1 Replies
View Related
Dec 2, 2011
When I quick dimension my objects it is shown in inches, I want it shown in feet according to scale, 1/8"=1',1/4"=1' etc.
View 9 Replies
View Related
Apr 4, 2012
While adding a vertex to a survey figure, if I click too near (like within 0.5') a survey point, the new vertex snaps to the survey point and uses its point number as the new vertex. Is there a setting for this snap feature to turn it off or change the tolerance?
View 9 Replies
View Related
Dec 13, 2011
One of the CAD engineer in my office is facing with a new problem. Until two days back she was able to use the "mid between two points" object snap. But recently it dissappeared from the shift+right click short cut menu. method to bring it back to the shortcut menu?
Sunilkumar
Formshore
CALICUT
View 3 Replies
View Related
Jun 3, 2013
I've inherited a dozen heavily detailed drawings only they have been drawn freehand and do not conform to any snap mode or grid. Unfortunately the objects are not all out by a certain amount, so to adjust the entire drawing to conform to the nearest snap point I need to pretty much go through every single object and snap it to the nearest point, which will take weeks.
I've googled around a bit and have found a lisp that may potentially work however I'm running 2004 LT so therefore can't test this lisp until I find someone with a full version.
I'm sure I can find someone with a full copy of Autocad even if it means borrowing their computer just to re-align the objects. I've yet to test out the lisp I found [URL] .... although this lisp seems to suggest it will work with text objects, unfortunately my drawings include a range of objects including text, rectangles, plines etc.
I've taken a look at DotSoft's 'ToolPac' and will buy it if needed as it will apparently align all objects to the nearest snap, but I thought I'd check to see if there was any other easier/cheaper ways of doing it first.
View 2 Replies
View Related
Jun 26, 2013
I upgraded to CS6 (v16) from CS5 and am having trouble with one feature so far. In CS5 I could create objects and move them around the artboard with an indicator that would come up to show me where I wasplacing it. For example a light green indicator would show if the object is centred (with the text 'centred' also visible) or a line extending from this point to the object to indicate how far away it was. Illustrator would also do this for the relative position to other objects as well as the edges of the artboard which made aligning things very easy.
These indicators have disappeared in CS6 and I can't seem to get them back even when using different align options. How can I get this to return in my copy of Illustrator CS6?
View 2 Replies
View Related
Nov 14, 2012
I made a drawing which contains lots of circles with a diameter of 12 and some lines that connect them. Pretty simple.
But.. i made the drawing with a x.xx precision (2 numbers and the program that has to load the .dxf file only likes all objects on the x. precision.. so no tents or hundredths precision.
I changed the precision from "0.00" to "0" in the unit settings but... the objects in my drawing still hanging on the old coordinates.
Is there any simple function or way to bulk action all this objects to the correct precision grid? I worked out that it is possible to select the circles which are in 1 horizontal line with each other and then change the Y setting to (for example) 45.0 if it was at 45 In this way it will put the circles on the correct grid. But... i have 1400 circles and lines
I also saw that the X coordinates of the circles in a horizontal line are different (ofcourse) and will be mentioned in autocad with *VARIES* I thought maybe can do something like *VARIES*.0 to put them on the correct grid but this kind of things didn't work.
View 7 Replies
View Related
Dec 3, 2012
I have a workflow where I will link a few PSD's and the other designers can modify the PSD files in Photoshop while I'm working on different content in the AI file. This allows us to work simultaneously and be more efficient with time, since my AI edits aren't dependant on them fixing up the images - it works great.
What I really need is to link an AI file and be able to snap to points on it while I'm creating a separate AI file - The linked AI isn't changing much but I need to see any updates made to it so I can adjust my AI accordingly - but it requires precision and I have to be able to snap to points/edges.
I've wanted this since Illustrator 10 and I can't believe there's no possible way to link to an AI or PDF and be able to just snap to the points, obviously AI knows about the points and lines, the linked content scales and is vector based. By default I can see the AI file but it has the "X" over it and all I can snap to are the edges/corners of the box it's placed in. This doesn't work for me and I have a hard time believing I'm the first person in the world to want to do a simultaneous workflow. I don't want to be able to edit the linked AI at all, just snap to its points.
View 9 Replies
View Related
Oct 17, 2012
I have tried using the hot grips selection by holding shift, but some of the grips are overlapping and I can only select the top most grip. It is also a slow process because I must click each individual grip that I want to move as a whole. Is there a way of selecting multiple grips at once including grips that are beneath others?
View 1 Replies
View Related
May 7, 2012
CS6 Extended (not beta version)
Windows 7
I need the anchor points to snap to whatever I have my gridlines and subdivisions set to in preferences along with guides I place. When I make the initial anchor points, they snap, but moving them after that, they don't snap. I see the new snap vector to pixel grid, but for the majority of my projects, that will not be used.
I have snap check marked and snap to all selected. Never had this problem before CS6.
View 12 Replies
View Related
Feb 27, 2013
I am having trouble exporting to a PDF to use in an InDesign document. If exports fine, but it looks AWFUL and doesn't show my annotations or notes clearly at all. it's all blurred.
View 2 Replies
View Related
Apr 16, 2013
I'm almost finish tracing my image in AutoCAD but suddenly the lines are not showing on top of the image. But it is at the back of the image.
View 2 Replies
View Related
Dec 10, 2013
I have used Microstation before and just used Autocad for 1 month.I am field surveyor and use Autocad for plotting stake out or other measurements. When I have to deliver a pdf drawning, there are 2 important things:
- It's have to be clear to see what I have done
- it's important to see the drawing I used to do job.
Making a new drawing with my measurements on it.To make it readable for the end user, I am using fading (transparency) on my referenced drawing. It is looking fine on the screen, but not on the plot.
On the plot all the colours are coming back to the original (before I change the transparency)I try to look on the plot style, but obviously it is not possible to change the settings for the referenced file, just for the all drawing.
What I am looking for is how to plot what I see on the screen (WYSIWYG)?I have looked for a solution on internet (can read english, danish & french) but I didn't find the solution yet!I would like to know how I can solve this problem?
I have to add, that I have several working sites with a lot of drawings, so I am looking for an easy/quick solution.
View 9 Replies
View Related
Dec 22, 2012
I have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point. Is there a quick command or script that does this?
View 2 Replies
View Related
Sep 26, 2013
In my AutoCAD Civil 3D 2013, I created a parcel from 4 lines. I selected the parcel (Property : 1) to get the Properties tab and edited the Style of my parcel: (i) changed Property : 1 to NewLOT : 1 in Name. (ii) added 22.5 mg/Kg Arsenic; 33.6 mg/Kg Lead; 66.9 mg/Kg Mercury to Description. In the drawing area, NewLOT : 1 appears, but, there are no 22.5 mg/Kg Arsenic, 33.6 mg/Kg Lead, 66.9 mg/Kg Mercury shown up below the NewLOT: 1 line - see the attached file. how to bring the chemical data from the Description of my parcel to the drawing area.
View 5 Replies
View Related
Dec 22, 2012
I have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point, ie round all vertices to the nearest whole number. Is there a quick command or script that does this?
View 2 Replies
View Related
Nov 28, 2012
Is there a LISP code for disabling OSNAP for specific objects or layers? An automatic disable for multileaders would be useful when fine tuning the text placement. Trouble is you need the snap for the leader end. Maybe you could disable the snap for the text grip only.
View 1 Replies
View Related
Nov 8, 2013
So you know how we have the snaps endpoint, perpendicular, midpoint etc. I want to find something like the snap "perpendicular."
Any way to start a line/pline then have it snap to another line at a 45° angle instead of perpendicular?
The only thing I could find was here
[URL]........
but I am not sure what all they are trying to do.
View 2 Replies
View Related
Aug 19, 2013
I need to snap to guide lines but the only snap I can get is to the endpoint, which results in some very diagonal lines. I actually have ortho turned on because I need only 90 degree angles. Sometimes I need to move an entire line and I would like it perfectly lined up to the guideline. The line being moved is part of a polyline.
I sometimes do need to start or end at an endpoint but how do I do that then also snap to just anywhere on the guideline while maintinaing a 90 degree angle?
View 2 Replies
View Related
Jul 29, 2011
Is it possible to get objects to snap to the bleed?
I can only snap to the page but would have thought it a common requirement to snap background gradients / textures to the bleed size.
Of course a work around is to set up guides or draw my own bleed rectangle, but that rather defeats the point of offering a native bleed?
View 4 Replies
View Related
Feb 7, 2013
I often draw over topography lines and use them for reference but I don't want to snap to them. Is there any way to view an object and turn off snapping only for that specific object or layer? For instance, can you make frozen layers visible somehow so they can be viewed, but not snapped to? Or is there another way to accomplish this?
View 4 Replies
View Related
Apr 17, 2013
I need to be able to snap som lines etc to some hatches. I have set Options - Drafting and unchecked "Ignore hatch objects" and OSNAPHACTH: 1 and it still doesnt snap.
View 9 Replies
View Related
Dec 4, 2012
Move tool was always snapping objects I'm moving before... What I meant by snap is, for example, I'll move an object right beside the left end of the document, it'll snap. And if ever I want to add a tiny bit of space between those two, I'll hold ctrl so it'll get rid of that 'snap' function.
Since the time I upgraded to CS6 Extended, It was working fine for a while. Until days ago, the problem started occuring. It won't snap anymore.
View 2 Replies
View Related
Aug 27, 2013
how to make circles touching with some snapping option of Xara Designer Pro 9? I would like to avoid the work and possible errors from the manual adjusting visually, so searching some consequent way
View 8 Replies
View Related
