I am having trouble exporting to a PDF to use in an InDesign document. If exports fine, but it looks AWFUL and doesn't show my annotations or notes clearly at all. it's all blurred.
View 2 RepliesIs there a way to control the annotations text height in Hole Chart, I like fx. 0.1mm in text height
how do I do that
My product:
Product Design Suite Ultimate 2013 English, AutoCAd Mechanical
Is there a way to create key notes automatically in R2013? Similar to automatic numbering in mtext, but with a hexagon or circle around each number at the beginning of each line. Right now I just type my paragraph then manually insert a key note with attributes at the appropriate location. Problem is when I add or delete text from the paragraph, the line spacing may change, then I have to manually re-align all the key note blocks.
View 6 Replies View RelatedIs it possible to use voice recognition to add notes / redline Autodesk 360 drawings in the field on a tablet. For example when inspecting a dock being able to use a stylus to add a redline cloud around a specific pile on a plan drawing and then adding comments via voice recognition would be a real time saver.
View 3 Replies View RelatedThis problem has just started to occur and frankly, I'm totally stuck. When I created 3d objects to represents conduits runs in a building, they worked fine. However, when I saved and reopened my file, the objects are shown in different locations, yet their snap points (endpoints, midpoints, arcs, etc) are shown in the correct location. I have attached an image showing what I mean to clarify. I am using Autocad 2014 and Civil 3D 2014.
View 1 Replies View RelatedI'm almost finish tracing my image in AutoCAD but suddenly the lines are not showing on top of the image. But it is at the back of the image.
View 2 Replies View RelatedI have used Microstation before and just used Autocad for 1 month.I am field surveyor and use Autocad for plotting stake out or other measurements. When I have to deliver a pdf drawning, there are 2 important things:
- It's have to be clear to see what I have done
- it's important to see the drawing I used to do job.
Making a new drawing with my measurements on it.To make it readable for the end user, I am using fading (transparency) on my referenced drawing. It is looking fine on the screen, but not on the plot.
On the plot all the colours are coming back to the original (before I change the transparency)I try to look on the plot style, but obviously it is not possible to change the settings for the referenced file, just for the all drawing.
What I am looking for is how to plot what I see on the screen (WYSIWYG)?I have looked for a solution on internet (can read english, danish & french) but I didn't find the solution yet!I would like to know how I can solve this problem?
I have to add, that I have several working sites with a lot of drawings, so I am looking for an easy/quick solution.
In my AutoCAD Civil 3D 2013, I created a parcel from 4 lines. I selected the parcel (Property : 1) to get the Properties tab and edited the Style of my parcel: (i) changed Property : 1 to NewLOT : 1 in Name. (ii) added 22.5 mg/Kg Arsenic; 33.6 mg/Kg Lead; 66.9 mg/Kg Mercury to Description. In the drawing area, NewLOT : 1 appears, but, there are no 22.5 mg/Kg Arsenic, 33.6 mg/Kg Lead, 66.9 mg/Kg Mercury shown up below the NewLOT: 1 line - see the attached file. how to bring the chemical data from the Description of my parcel to the drawing area.
View 5 Replies View Relatedall pctures, I have corrected with Gimp 2.8 and exported them in the origin Format (*.JPG) Cannot beshown on my TV by USB.
Linux Mint Version 13 (maya) (64-Bit)Kernel Linux 3.2.0-29-generic
I am trying to export my document to eps, but it generates an empty file without any error message. My file contains several object arrays. Can this cause a problem during the file format conversion?
View 1 Replies View RelatedI am trying to make a PDF file out of a Layout to accompany the DXF files to a client, but when I create the file, all the annotation is missing. I have created such PDF's in the past and they worked fine, so Im scratching my head as to why it doesnt work now
I have attached the files so that this can be seen.
I am currently designing a logo for our company in AutoCAD. We use this logo for drawings, shirts, invoices, proposals,....etc. The logo we use was drawing by hand and is very choppy when blown up. This doesn't look good when we send the logo to make shirts and decals. I finished the logo in AutoCAD, which looks very smooth and perfect but when I try to export it in either PNG or JPEG format the logo looks choppy when zoomed in, unlike AutoCAD where it looks smooth no matter how much you zoom into it.
View 1 Replies View RelatedI'm trying to export my drawing in paper layout to PDF but it is not exporting to the correct paper size. The final export is bigger than the regular printing paper. What should I do?
View 6 Replies View RelatedI have a 3D geometry that i wanted to export as a .STL file. But every time i selected the geometry to export, i keep getting the option "Select solids or watertight meshes: Specify opposite corner:." Although the command line does show that the objects have been selected. I've tried different ways of selecting the geometry but every time it shows the same thing.
P.S - i was able to export it in other (.IGES, .IGS formats) but it doesn't seem to be working the same way with .STL
I am trying to figure out how to get autocad2014 and our company's cnc machine to communicate.
The machine uses Solid Ultimate with Screen-to-machine software.
From what ive gathered, I can save my drawing as a R12, R13, R14 version dxf file, which is what is needed for the two programs to talk to each other. The problem is, when i save the dxf file, it saves paper space, not model space. Therefore, all that comes into the cnc program is a titleblock or whatever else I had on the page in paper space.
The cnc program doesnt pick up viewports either.
I need a way to save model space as dxf.
I am using AutoCAD 2011 for a school project. It's pretty basic work--just making 2D architectural plots with imperial annotation units. I'm having two problems.
1) My school computers only have the "educational version" of the program installed, and it only has a continuous line. I need a dotted line for some parts of the project. Is there someplace where I could download the appropriate .lin file and add it to the program?
2) I have figured out how to change the program into the "Architectural" units mode, but when I make dimension lines the measurements say, for instance, 2.5 instead of 2'6". How can I change this from the former to the latter?
When exporting from AutoCad to pdf, from paper space, my blocks come out looking strange. I was having the same problem with text but fixed that by converting to Arial. I am exporting to an Arch E size. I have found that when I am zoomed out to show my entire campus, this is when I my problem occurs. When I am zoomed in to show a specific area, export is fine.
Using AutoCad 2014. Files saved back to version 2010.
When you set the lineweight the result is only viewable when you print the drawing, however how is it possible to view the lineweights when I export the drawing to pdf as well.
View 1 Replies View RelatedI have tried to export a DXF model to SAT via the Export option in the File menu. However, I do not see any SAT file generated and there is no message that the export attempt was unsuccessful. How to approach this problem?
View 8 Replies View RelatedI am currenly having an issue when I try to edit a drawing on inventor 13'. pretty much everything I imported from sketchup is a mesh, there are a few elements of solids because I added a few things on autoCAD eng. I would like to know if there is a way to make the meshes into soilds or if there is a work-around.
View 3 Replies View RelatedI am exporting to Adobe and AplhaCam, when ever I send DXF or DWG files, the Circles or arcs are segmented.
How do I make not so segmented?
I still can´t import inventor materials to MaxDesign 2013.
Using STEP or DWG files accomplishes this but due to the fact that i use multi body objects the imported geometry is grouped in an awkward manner (multiple occurences of an object are grouped and i can´t ungroup them).
How to export right?
The issue is quite pressing and my posts in the AREA have not been answered yet. Is it an Inventor or a Max issue?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
My company has just aquired Autocad2013 after using Autocad2000LT for years. My boss feels that there might be a way to export the text in a drawing as a table.
View 3 Replies View RelatedI am trying to create a pdf file from a dwg file, using DWG True View 2013. I am NOT a CAD user, so all of the terms are new to me. I read that sometimes it's better to convert the DWG to DWF first and then convert it to PDF. So, I tried 'export' to DWF after trying 'export' to PDF. In both cases, after pressing SAVE, I tried to find the new file and couldn't. Basically, I am trying to print out a DWG file (that is in color), so when I print the DWG directly, you can't see the lines very well. That's why I'm trying to convert it to a pdf first.
View 1 Replies View RelatedIs there a way to prevent losing annotation in drawings if you make a minor change in the model. For example if you change the size of a W beam you lose all the welds and text associated.
View 1 Replies View RelatedI have the 2013 civil 3D version. I am doing a site plan for school, and would like to print it out so that everything shows up clearly.
I would like to print it on a 24x36 sheet, so I have set up my page to that size. When I maximize my viewport to the page borders so that the viewport is at its largest and scale the viewport so that the entire site plan fits in the viewport, everything shows up so small in the print preview screen. The annotations show up as black bars and I can only read them if I zoom in. I have limited access to printing so I want to make sure I get it right! Will I be able to read the annotations and hatching once it has printed? Even though I can't read them in the print preview or layout without zooming in?
I am using annotation scaling, so maybe my text height is wrong? Maybe I need a larger sheet than 24x36? My viewport and annotation scales are set to 1"=20' and box drawn around my site would be about 100' x 300'.
Is there a way to change the annotations so that they become millimeters and not meters?
I dont really want to change my entire drawing to millimeters because i have other drawings in my model space which suit meters. It's just this one section I have drawn is so detailed and zoomed in, it really should be in millimeters.
If there isn't i'll just change the whole drawing, but thought I should ask on here first in case I was missing something obvious
How to export points that i have plotted into a text file using autocad 2013? I've tried to look on the internet and it seems you can download plug ins but i don't know if those are safe to use.
View 3 Replies View RelatedEssentially, I've got a bunch of extruded polylines - so, some 3-d shapes - that I'm viewing in a new layout/'viewport' (?), which is set to SW Isometric view in '2D wireframe' viewing style. I've got my lines in different colors, mapped to be all black but different line widths in a custom Plot Style .ctb file.
So, when I change the 'page setup' to "display plot style", everything seems fine. All the lines go black in the viewport, and it seems as though I've configured everything correctly. When I preview an export to .pdf, however - or actually export it - this is lost. The export comes out in color.
I've done exporting using both EXPORTPDF, and PLOT, in both cases making absolutely certain that the .ctb file is being linked correctly (with EXPORTPDF, I've done it both using the 'current' page settings, and also 'override'), and with the PLOT, using the DWG to PDF converter,
I've looked through EXPORTSETTINGS, EXPORT...
On the same computer, with another earlier, simpler file, I have no issues accomplishing what I want.For additional information/to make things more annoying for me, at this stage, the previous file which DID work seemed to conserve layer information, and allowed me to edit individual lines later, if necessary... This colored "I don't care about your plot styles I'm not going B/W" file seems to just be a flat image.
I've compared the two files in two tabs extensively, and can't seem to find ANY other difference, in any of the settings...
Additional info:
PC running Windows 8, Autocad 2014, Adobe Reader XI...
Tried both the DWG to PDF and Adobe PDF plugins to export to PDF...
I've searched this Discussion Groups area on the site and have found a couple solutions. I've tried them all but I can't seem to figure out how to get ALL of my labels to display when I plot or when I export to PDF. It seems that only the POLES layer labels are having trouble showing up...
I understand scaling and it doesn't seem to be the issue. I've tried plotting under different scales, and I still get the same thing.I've attached an image showing the outcome.
On the left is the PRINT PREVIEW in AutoCAD.
On the right is the EXPORTED PDF.
I've checked in the administrator under POLE LABELS, and changed a couple things around but I can't seem to get the pole labels to show up.
In attempting to use either 'export face as' or 'export sketch as' from a solid model in Inventor 2013 the resultant DXF file ALWAYS consists of PolyLines. This prevents other "downstream" software from properly importing the file as a DXF. Thus far the ONLY work-around I have found is to open the DXF in AutoCAD, Explode the polylines, and then re-save as a DXF from AutoCAD.
View 8 Replies View Related