AutoCad :: DWG True View 2013 - Exporting To PDF Or DWF
Feb 21, 2013
I am trying to create a pdf file from a dwg file, using DWG True View 2013. I am NOT a CAD user, so all of the terms are new to me. I read that sometimes it's better to convert the DWG to DWF first and then convert it to PDF. So, I tried 'export' to DWF after trying 'export' to PDF. In both cases, after pressing SAVE, I tried to find the new file and couldn't. Basically, I am trying to print out a DWG file (that is in color), so when I print the DWG directly, you can't see the lines very well. That's why I'm trying to convert it to a pdf first.
View 1 Replies
ADVERTISEMENT
Jul 27, 2012
The Architect posted a drawing that I must print in 2012 format (she forgot to save to 2004). I have tried 6 machines in our office this morning, attempting to get True View 2013 to run. The exact same error problem that plagued my attempts to use True View 2012 are occurring. True View says .NET 4.0 isn't installed. The problem is, that it is installed and running correctly. In two of the machines I went through the repair process of .NET 4.0 to see if there was a problem. There wasn't, no change; True View still errored out before installing. Is this a problem with buggy software? Are there any other options open to me? I don't know why they stopped updating True Convert. It was far superior and not full of programming/install bugs.
View 9 Replies
View Related
Nov 22, 2012
When you set the lineweight the result is only viewable when you print the drawing, however how is it possible to view the lineweights when I export the drawing to pdf as well.
View 1 Replies
View Related
Apr 10, 2013
Last week I downloaded the Autodesk Design Review and for some reason I installed the DWG TrueView as well. Now, every time I open up a .dwg through explorer, True View overrules AutoCAD and thinks it has to be the one to open the file. Is there any way to turn this program off?
View 5 Replies
View Related
Mar 20, 2013
I'm working with AutoCAD 2012 x64 and I need a control to view DWG files selected in my ListView. I tried using DWG True View 2013 and it worked well, but this is more than my requirement. My requirement is to simply show a preview of the drawing. But DWGTrue View is an advance control and is not standalone i.e. Users have to download and install its full installer.
This might require some customization to code in order to fix TOP View and do a Zoom Extent: Currently not succeeded.
I also seek using DWGThumnailviewer.ocx referenced in this post but unfortunately, I couldn't find DWGThumnailViewer.ocx with AutoCAD 2012. I guess it was discontinued.
Other option could be to generate a raster graphic file (*.jpg, *.gif, *.png, *.bmp) and display that into a picture box. I tried some code from this thread and this one but at some small dwg files, it is unable to read bytes.
View 1 Replies
View Related
Nov 8, 2012
When I plot to paper from TV2012, I'm good with monochrome - black lines, white background - awesome.
I would *like*, however, to plot a few things to PDF, but retain the view I have on my display - I.E., lines/labels of various colors and a BLACK background. I've been poking around for a bit, and if there's a way to make that setting, I'm no finding it. Everything I try has gotten me colored lines/labels on a white background.
View 1 Replies
View Related
Jul 13, 2012
What I am having trouble with is that I need to get a true elevation. When you use the scroll wheel the model moves away from a true elevation, either above or below ground level. I need the tru elevation to create 2D sections using flatshot.
View 2 Replies
View Related
Sep 26, 2013
I installed acad 2014 and copied all my font files into the directory that cad says it looks in under the support paths, and the main font used is a true text font (penguin) and it is not showing up right.
View 2 Replies
View Related
Sep 26, 2012
I have a curved piece of acrylic in a design that is a section of a cone with 2 holes in it (for a structure to pass through), I need to try and flatten it for CNC matching.
View 1 Replies
View Related
Sep 23, 2013
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies
View Related
Jun 18, 2013
I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 7 Replies
View Related
May 16, 2012
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies
View Related
Jul 9, 2013
Is it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
View 1 Replies
View Related
Jun 27, 2012
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies
View Related
Jan 9, 2014
Is there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies
View Related
Apr 4, 2012
When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies
View Related
Jan 21, 2011
The view cube in INV2011 has the front view as the front view and the top as the top (I am using XY as top, and XZ as front). When I export to DWF everything gets turned on its side. XY is FRONT (previously TOP), top is upside down view of one of the sides. I've done the make current view home in 2011.
View 3 Replies
View Related
Apr 24, 2013
I am trying to export my document to eps, but it generates an empty file without any error message. My file contains several object arrays. Can this cause a problem during the file format conversion?
View 1 Replies
View Related
Jul 7, 2012
I am currently designing a logo for our company in AutoCAD. We use this logo for drawings, shirts, invoices, proposals,....etc. The logo we use was drawing by hand and is very choppy when blown up. This doesn't look good when we send the logo to make shirts and decals. I finished the logo in AutoCAD, which looks very smooth and perfect but when I try to export it in either PNG or JPEG format the logo looks choppy when zoomed in, unlike AutoCAD where it looks smooth no matter how much you zoom into it.
View 1 Replies
View Related
Nov 4, 2012
I'm trying to export my drawing in paper layout to PDF but it is not exporting to the correct paper size. The final export is bigger than the regular printing paper. What should I do?
View 6 Replies
View Related
Dec 16, 2013
I have a 3D geometry that i wanted to export as a .STL file. But every time i selected the geometry to export, i keep getting the option "Select solids or watertight meshes: Specify opposite corner:." Although the command line does show that the objects have been selected. I've tried different ways of selecting the geometry but every time it shows the same thing.
P.S - i was able to export it in other (.IGES, .IGS formats) but it doesn't seem to be working the same way with .STL
View 7 Replies
View Related
Jul 1, 2013
I am trying to figure out how to get autocad2014 and our company's cnc machine to communicate.
The machine uses Solid Ultimate with Screen-to-machine software.
From what ive gathered, I can save my drawing as a R12, R13, R14 version dxf file, which is what is needed for the two programs to talk to each other. The problem is, when i save the dxf file, it saves paper space, not model space. Therefore, all that comes into the cnc program is a titleblock or whatever else I had on the page in paper space.
The cnc program doesnt pick up viewports either.
I need a way to save model space as dxf.
View 9 Replies
View Related
Aug 8, 2013
When exporting from AutoCad to pdf, from paper space, my blocks come out looking strange. I was having the same problem with text but fixed that by converting to Arial. I am exporting to an Arch E size. I have found that when I am zoomed out to show my entire campus, this is when I my problem occurs. When I am zoomed in to show a specific area, export is fine.
Using AutoCad 2014. Files saved back to version 2010.
View 3 Replies
View Related
Jun 1, 2013
I have tried to export a DXF model to SAT via the Export option in the File menu. However, I do not see any SAT file generated and there is no message that the export attempt was unsuccessful. How to approach this problem?
View 8 Replies
View Related
Sep 30, 2012
I am currenly having an issue when I try to edit a drawing on inventor 13'. pretty much everything I imported from sketchup is a mesh, there are a few elements of solids because I added a few things on autoCAD eng. I would like to know if there is a way to make the meshes into soilds or if there is a work-around.
View 3 Replies
View Related
Dec 5, 2012
I am exporting to Adobe and AplhaCam, when ever I send DXF or DWG files, the Circles or arcs are segmented.
How do I make not so segmented?
View 9 Replies
View Related
Feb 4, 2013
I still can´t import inventor materials to MaxDesign 2013.
Using STEP or DWG files accomplishes this but due to the fact that i use multi body objects the imported geometry is grouped in an awkward manner (multiple occurences of an object are grouped and i can´t ungroup them).
How to export right?
The issue is quite pressing and my posts in the AREA have not been answered yet. Is it an Inventor or a Max issue?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
View 1 Replies
View Related
Jun 21, 2012
My company has just aquired Autocad2013 after using Autocad2000LT for years. My boss feels that there might be a way to export the text in a drawing as a table.
View 3 Replies
View Related
Feb 27, 2013
I am having trouble exporting to a PDF to use in an InDesign document. If exports fine, but it looks AWFUL and doesn't show my annotations or notes clearly at all. it's all blurred.
View 2 Replies
View Related
Oct 5, 2012
How to export points that i have plotted into a text file using autocad 2013? I've tried to look on the internet and it seems you can download plug ins but i don't know if those are safe to use.
View 3 Replies
View Related
Oct 3, 2013
Essentially, I've got a bunch of extruded polylines - so, some 3-d shapes - that I'm viewing in a new layout/'viewport' (?), which is set to SW Isometric view in '2D wireframe' viewing style. I've got my lines in different colors, mapped to be all black but different line widths in a custom Plot Style .ctb file.
So, when I change the 'page setup' to "display plot style", everything seems fine. All the lines go black in the viewport, and it seems as though I've configured everything correctly. When I preview an export to .pdf, however - or actually export it - this is lost. The export comes out in color.
I've done exporting using both EXPORTPDF, and PLOT, in both cases making absolutely certain that the .ctb file is being linked correctly (with EXPORTPDF, I've done it both using the 'current' page settings, and also 'override'), and with the PLOT, using the DWG to PDF converter,
I've looked through EXPORTSETTINGS, EXPORT...
On the same computer, with another earlier, simpler file, I have no issues accomplishing what I want.For additional information/to make things more annoying for me, at this stage, the previous file which DID work seemed to conserve layer information, and allowed me to edit individual lines later, if necessary... This colored "I don't care about your plot styles I'm not going B/W" file seems to just be a flat image.
I've compared the two files in two tabs extensively, and can't seem to find ANY other difference, in any of the settings...
Additional info:
PC running Windows 8, Autocad 2014, Adobe Reader XI...
Tried both the DWG to PDF and Adobe PDF plugins to export to PDF...
View 1 Replies
View Related
