AutoCAD Civil 3D :: 2013 / Changing TOP View To TOP-Front View For 2 Overlapped Points

Sep 23, 2013

I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file? 

View 7 Replies


ADVERTISEMENT

AutoCAD 2010 :: Rotating Survey Text And Points To Front View

Oct 30, 2013

I have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.

we had a toolbar with a button to perform this function. However, now i don't have the toolbar,

View 2 Replies View Related

AutoCAD 2013 :: Couldn't Dimension 3d Models From Side And Front View

Jun 23, 2013

i have been drawing a 3d model and when it comes to dimensioning, i can only do it for the vertical and horizontal distance from the top view. i cant find a way to dimension the thickness of my model from the side or ront view.

how do i change the settings for this..

View 3 Replies View Related

3ds Max :: Render Output Works From Perspective View But Not From Front View?

Aug 8, 2013

Dabbler using 3ds Max Design. Mapping image on to a plane - Rendering from Perspective window:
 
'Rendering' from Front View window:

View 4 Replies View Related

Revit :: 2013 - Transparent Material Pushed To Front Of 3D View

Apr 24, 2013

My transparent materials are being pushed to the front of 3d view in Revit 2013, how can I fix it?

View 1 Replies View Related

AutoCAD Architecture :: Copy Layer In Top View To New Layer In Front View

Nov 11, 2011

New to AutoCAD.  Designing a building in plan.  Then used the plan to draw a section in new layer, but still in plan view.  Is there a way to copy that section onto a new layer in front view and erase the old section layer? .

View 1 Replies View Related

AutoCAD Civil 3D :: Corridor Style-getting Points To Show In Plan View?

Dec 31, 2013

I'm not too familiar with corridor styles.  How can get points to show on my cooridor in plan view?

View 4 Replies View Related

AutoCAD 2013 :: Create Layout View Using View Manager In Paperspace?

Jun 18, 2013

I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.

Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional

View 7 Replies View Related

AutoCAD 2013 :: How To Scale The Layout View And Remain The Viewport View

May 16, 2012

i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.

View 8 Replies View Related

AutoCAD 2013 :: Base View Command To Automatically Insert Centrelines In Projected View

Jul 9, 2013

Is it possible to automatically insert centrelines in projected views when using the base view command?

I believe it is possible with Inventor.

Using Autocad 2014

View 1 Replies View Related

AutoCAD 2013 :: Plan View Drawings In Elevation View

Jun 27, 2012

I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?

View 1 Replies View Related

AutoCad 3D :: UCS - Using Two Viewports (One In Top And Other In Front View)

May 28, 2013

I have experience making 3D models in Vectorworks but have never used 3D in AutoCAD. I am using 2014 version. I understand the principle of UCS and the idea behind it but am really struggling to use it.

Currently I am trying to use two viewports, one in top view and one in front view.

I am trying to use the two to ensure I am placing objects in the correct place in relation to everything else. However...how comes when I move something up or down in front view it moves completely out of position in top view? surely if i'm moving the object up or down it should not effect the position of anything in top view?

View 9 Replies View Related

AutoCAD .NET :: Changing 3D View To Top View

Aug 2, 2013

How do I join the entities? I guess if they are only lines, I can just create a new polyline with every vertices of the lines.
But I have arcs as parts of the entities, I don't think I can just link as a polyline for an arc.

So I tried the following...
 
ObjectId[] oIDs = oIDList.ToArray();Editor ed = doc.Editor;ed.SetImpliedSelection(oIDs);PromptSelectionResult psr = ed.SelectImplied();if (psr.Status == PromptStatus.OK){ doc.SendStringToExecute("._PEDIT
_m
_p
_y
_join

", true, false, false);} 

It works, but this is not the perfect solution I wanted. I need to Transform the joined polyline, meaning I need to get the Object Id of newly created joined polyline. I guess I can use Object Appended?

View 1 Replies View Related

AutoCAD .NET :: Changing 3D View To Top View

Aug 2, 2013

doc.SendStringToExecute("-view
top
", true, false, false);

Well, I know this would change the view.

But I need to do this in the middle of some process. (I tried it, but the next step gets executed before view change is done.) I am changing the view to use SelectWindowPolygon().

So I need to do this by lines of codes. (So that the view change gets done before the next step.) I found a couple solutions but the codes contain some methods that is not supported in ARX 2007.

View 8 Replies View Related

AutoCAD 2013 :: How To Have No View Transition When Using View Cube

Jan 9, 2014

Is there a way to have no view transition when changing views with the view cube?  I'd prefer that it just switch to the desired view instantly with no transition.

View 3 Replies View Related

AutoCAD 2013 :: Section View From Base View

Apr 4, 2012

When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.

View 3 Replies View Related

AutoCad :: Dimensions Not Visible In Front View

Aug 9, 2012

i have a problem of net being able to view dimensions in the model space in the current view. i was not paying attention to what view i started the 2d drawing in, but right now it is in the front view. the dimensions lines gets put on a plane that the program has decided and wheather i try to dimension above or below it, it goes to that line. i have also noticed that for some unknown reason the 2d drawing gave itself depth. it is a very large drawing and i have tried to clip parts of it to put on a new drawing it defalts to the front view and i still cannot dimension on it.

I am using arch 2009, and the program did get corrupt during my work and had to reinstall. i have reinstalled several time with the same result. i have tried arch 2011 also with the same result. i think there is a setting that somehow changed and i can't figure out what it is, or should i chalk this up to a program malfunction and start from scratch in a top view (which works fine).

View 9 Replies View Related

AutoCAD Civil 3D :: Mark Items In Alignment View To Display In Profile View?

Dec 20, 2012

I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view.  I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items.  The marker I would like to use will be something like the vertical style grade break markers.

Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?

View 9 Replies View Related

AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View

Nov 28, 2012

1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?

2. How can I best come up with the right volume to fill.  

3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet) 

4. How to I render a rock fill in this cave-in.  

The attached aerial image , has survey or cogo points  that are imported to surface, to become surface points. . So I wanted to create a surface profile  below  and an outline of  fill  above it.  Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment. 

But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not)  is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area. 

The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1

View 5 Replies View Related

AutoCAD Civil 3D :: How To Create A Section View For A Pond Other Than Quick View

Oct 1, 2012

how to create a section view for a pond other than quick view.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Choose Right Templates / View Ports / View Frames

Aug 26, 2013

I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the  2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file.  what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.

View 1 Replies View Related

AutoCAD Civil 3D :: Working Back And Forth From Plan View And Profile View

Jan 18, 2013

I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?

View 9 Replies View Related

AutoCAD Inventor :: Find Top / Right And Front View Through Tools

May 22, 2012

I have managed to find the Top view, Right view and Front view through the Tools>customisation option, but cannot find Left, top or rear view.Where are they?

View 6 Replies View Related

AutoCAD Civil 3D :: Add An Object From A Profile View To A Plan View

May 29, 2013

Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.

View 9 Replies View Related

AutoCAD Inventor :: Custom Front View Isn't Reflected In DWG File?

Feb 24, 2013

Ive been using inventor for around 2 months now and its all been going good... ive recently done a rather complex assembly that id rather not redo... unfortunately... i ungrounded the base part fiddling with it trying to find a working constraint set for my needs (evenly spaces cylinders on a base plate and a centered on a mounting plate... i ended up using holes and the cylinders screw holes to align them but still this was AFTER i messed it up)

So now because of that the default view is skewed by roughly 45 degrees or so... now i have set the front view manually to reset the ground plane.... but if i stick this in a dwg as front its as if i did nothing... and yes i have triple check to make sure ive set the front view.

View 4 Replies View Related

AutoCad 3D :: Flat DXF File To Make Top And Front View Of Model

Sep 27, 2012

I have a dxf file of a 3d model (cant attach as it exceeds the size limit) that I need to have put in a 2D dwg file. basically I need to flatten it to make a top and front view of the model.

I haven't work in 3d in some time and never worked with dxf files, so I'm not even sure this is possible. I tried opening the dxf in auto cad, but it doesn't seem to find the file..I cant see dxf extensions.

View 9 Replies View Related

AutoCAD Civil 3D :: 2013 View From Bottom?

Apr 15, 2013

Having issues with 2013, somehow switching to bottom view. Open a drawing and everything looks normal except when I look at the viewcube and I am looking up from the bottom.

Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600

View 9 Replies View Related

GIMP :: Rotating Front View Of Tire

Dec 6, 2013

I am looking for a way to make front view of a tire look like it's rotating ... i.e. the tread is moving. I have tried moving the tread, but that didn't look right.

I have seen it done but can't recreate it. I have attached an example .

View 2 Replies View Related

AutoCAD Civil 3D :: 2013 Crashing On Export To CAD When Pipes In Profile View

Jan 10, 2013

So I have been getting a fatal error "INTERNAL ERROR: !dbobji.cpp@8743: eNotOpenForWrite" when I try to export to 2010 CAD.

I have worked out that it happens when pipes are displayed in the profile view.

View 7 Replies View Related

AutoCAD Civil 3D :: 2013 Profile View - Grid Displays Incorrectly

Oct 28, 2013

After upgrading from 2013 to 2014 we have a few drawings that had profiles created in 2013 and now when we open the drawing in 2014 the profile view disappears and so we regen and then we get a fatal error. I ran an audit and there are no errors, I re-sycronized the surfaces, i also ran an audit on all the xreferences.

View 1 Replies View Related

AutoCAD Civil 3D :: Adjustment Of Section View Data Bands 2013?

Jan 14, 2013

I have many section views of a road where I want to calculate ground volumes. I have a curb in a section view and I want that Civil showed me just an elevation at the top of the curb and at the top of the road cover. Is it possible to do that? And also distances: I want that Civil just show me a distance from the center of a road to a curb and from a curb to the edge of the road.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved