AutoCAD 2010 :: Rotating Survey Text And Points To Front View
Oct 30, 2013
I have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.
we had a toolbar with a button to perform this function. However, now i don't have the toolbar,
View 2 Replies
ADVERTISEMENT
Jul 25, 2013
I had an issue where I dropped points into my drawing for a survey and they weren't at the distance compared to recorded plat. I have checked the points mathematically, and they were dead on. A coworker suggested that I WBLOCK the points I was working with that way I don't move single points out of place. I disagreed, because the way i move points is I use the TOOLSPACE and move them as a group. So what I did was to drop the points again and now they were dead on the second time. I don't like turning points into a block due to the fact that it messes up my drawing.
View 6 Replies
View Related
Sep 23, 2013
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies
View Related
Dec 6, 2013
I am looking for a way to make front view of a tire look like it's rotating ... i.e. the tread is moving. I have tried moving the tread, but that didn't look right.
I have seen it done but can't recreate it. I have attached an example .
View 2 Replies
View Related
Feb 1, 2012
I am tired of re-creating Description Keys everytime I want to bring in Survey Points into a drawing. I have tried to drag and drop, but that does not seem to work for me. I can's copy it. Is there a way to get Civil 3D 2010 Description Keys into Civil 3D 2012.
View 3 Replies
View Related
Nov 1, 2012
I'm a relative beginner with AutoCAD and was looking to find a way to quickly import a selection of survey points (X & Y coordinates) and their labels from an excel spreadsheet using a script file.
View 3 Replies
View Related
May 3, 2012
here's my process:
1- Import the asc file into my drawing.
2- Convert the asc file to a FBK file
3- Import my FBK file. The survey figure linework generated doesn't overlay my previously imported asc file. I checked the FBK file and the coord's match the asc file. I'm confused as to why the survey figures don't overlay the survey points from the asc file, since the coords match in both? The survey figures are all shifted .7' and 54deg. from the points. The elevations are all good on the survey figures, as they match the survey points.
So my quick fix is to explode the survey figures, since I don't really need them for what I'm doing, and then select all the 3d polylines and move them to them to an appropriate survey point. Everything then looks fine and I can get the job done.
However, I would like some insight as to why this might be happening. It's strange that the FBK and asc coordinates match, but the survey figures aren't lying over them.
View 1 Replies
View Related
Jul 31, 2013
I have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set. So the viewports for the sections are rotated 90 degrees and difficult to read on the screen. Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space?
I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup. This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible. And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.
If it's not possible, then it's not the end of the world. We have AutoCAD Architecture and AutoCAD LT 2012 & 2013.
View 6 Replies
View Related
Jan 3, 2012
Im using AC 2008 LT Im developing dynimc blocks. When rotating the block the text will rotate as well. Is there any way to align the text to the view so it will be always straight when rotating?
View 3 Replies
View Related
Nov 1, 2012
I know I can rotate text with the rotate command or from the properties palette, but if I'm editing text and the text formatting toolbar is displayed, why don't I have the ability to modify the rotation right there? How do I get it there? Can I customize this toolbar?
View 3 Replies
View Related
Mar 11, 2012
I want to export the length of each polyline individuality & simultaneously in different -2 columns/row. How to prepare the Bar bending schedule. I am appending the drawing .
View 1 Replies
View Related
Oct 23, 2013
Any way using autoCAD LT 2014 to get CAD to display the elevation heights of survey points without having to type the heights in text bozes next to each individual point. i can insert a field which displays the elevation of the point but doing this again i would have to do every point individually.
Another words is there a way to select all the survey points required and get CAD to display a certain property, which in my case is the elevation height of that survey point, next to it? so it looks like x 23.35 x 23.57 etc..
View 9 Replies
View Related
Apr 29, 2013
I have seen several posts about rotating a view on a sheet and the text not remaining readable.
I have seen the posts that say to rotate the view then add text... What if you didn't plan that far ahead - are you just stuck?
Is there any new developments on this?
I have a client who needs to be able to this without having to rotate all the text in the project.
View 6 Replies
View Related
Jan 8, 2014
I am trying to rotate a database through translate survey database and after I input all of my info (rotation basepoint etc.) it is rotating all of the points no where near where they are suppose to be. I was experimenting with the command a bit using various rotation angles, and it seemed to work at first, but I got out of my drawing without saving and got back in and I tried to do it again using the same rotation base point etc. the location of the points are all out of whack now. Did I do something unintentionally to the points or do I maybe have to re-import the fieldbook?
I thought not saving the drawing would be a safe way to not save any of my translating....
View 3 Replies
View Related
Sep 17, 2013
I've made a grid system of 5 meters per unit and RL of each points is known to me. How do I create this grid system in AutoCad? I've seen people writing about importing survey points file into AutoCad, but how do we create one such?
View 2 Replies
View Related
Aug 8, 2013
Dabbler using 3ds Max Design. Mapping image on to a plane - Rendering from Perspective window:
'Rendering' from Front View window:
View 4 Replies
View Related
May 3, 2012
How can I import survey points in AutoCAD Map. The points are stuctured like this (point number, easting, northing, altitude).
View 7 Replies
View Related
Mar 13, 2009
Using AutoCAD 2004 full version.
I am trying to import a survey into AutoCAD, and my client requires Attribute points. Normally we do not use attribute points, and I'm not having any luck importing the txt file that I created.
Assuming that I don't know the first thing about attributes (I now know a little, but I'm afraid that it might be wrong), but I know AutoCAD well (for what I do as a surveyor) what is the process of creating an attribute, and importing bulk amounts of data into it. The data would include:
(x) coord, (y) coord, z(coord) for the insertion point of the block Name, Feature_Code, Elev for the Tagged data needing to appear beside a 3d-point representing the x,y,z coords.
Using Land Desktop 3 I am able to create AECC points, but I do not have any Land Desktop experience at all, so I would rather stay away (I have no real need for it).
I do not have any 3rd party software that I know of that creates attribute points from a survey file, except for Trimble Geomatics Office, but it does not give me the format or all the data that I require.
View 4 Replies
View Related
Aug 14, 2006
My field crew assumed a coordinate system and surveyed a job. I need to rotate the points in my dwg to match another survey. I have not found a rotate points command. Other LDT type commands have been replaced by standard ACAD commands by adding the transparent commands to them. I tried to use the ACAD rotate command and the transparent commands to rotate my points, but there is no transparent command to find multiple points. I need to select the points by point number range if possible.
View 9 Replies
View Related
Jun 27, 2012
Here is my procedure.
1. Import survey point via ascii file into a new drawing call it Field-dwg.
2, Create a survey data base
3. Import all points in the the data base under import event.
4. open existing drawing, work-dwg, import points as needed from the Survey Data Base.
Problem : Survey points needs be renumber.
I goto field-dwg, and fix the points (renumber).
open survey data base for edit, and import Event, field-dwg/points/update : nothing happen
also try Import Event, field-dwg, survey points, update : nothing happen
so I re-import the points, all is good.
Then I goto work-dwg, and try to update the point, nothing happen.
View 5 Replies
View Related
Apr 12, 2012
I was wondering what is the difference between importing points under the Prospector tab versus importing points under the Suvey tab? And how either of the two methods relate to using Data Shortcut?
I would like to create a survey topo drawing that contains points and surface information which other Design drawings that are attached to the Data Shortcut project can access but not be able to make any changes to the original points and existing surface information.
View 2 Replies
View Related
Jan 2, 2014
I would like to remove certain points from my survey database. I have all the points that i want to remove queried into a point group. Is there a quick way to delete these from the database?
View 9 Replies
View Related
Apr 11, 2012
what if i have points that are non-consecutive? the survey crew is new at this so i'm getting some higher number points that line work wise appear in the middle of lower number points. the figure seems to draw numerically. is there a way to do a figure by proximity?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 3 Replies
View Related
Oct 9, 2010
is it possible to create a surface quickly in Autocad using 3d survey points on a DWG?
The way I did it was 3dpolylines and then lofting the surfaces. Quite time consuming.
View 9 Replies
View Related
Jun 7, 2013
I have created cogo points for field staking. I'd like to share them through the survey database.Can I add the points to the Survey Database without first having to export them to a file?
View 1 Replies
View Related
Jan 2, 2014
I am unable to delete points from my survey database. What could be preventing me from performing this task?
View 1 Replies
View Related
Aug 28, 2013
Every week I recieve new survey data (typically around 20 points) to insert onto an existing surface of our local landfill.
The surface is displayed as minor and major contours. The new survey data typically always has higher elevations then the exist surface and shot roughly 2 meters apart.
Here's my issue...when the survey data is inserted and the surface is rebuilt, the contours seem to turn into little cones at each new point. see attached...
how to eliminate these 'cones' so the surface contours seem more relistic?
View 2 Replies
View Related
May 23, 2013
Sometimes when i import points Civil 3d creates a Point group in the drawing with the name of the point file, sometime it does not. I prefer when it does create this point group. It always seems to create a Survey Point Group. How do i control wether or not a point group is created in the import?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
View 5 Replies
View Related
May 7, 2012
How to set stakeout points on a pipe network? I have an alignment from the engineer that also has a pipe network associated with it that I would like to automatically set points vertically and horizontally on (like I can do with a regular alignment/profile).
C3D - 2014
View 2 Replies
View Related
Apr 9, 2013
Which is the preferred database to store survey points?
View 2 Replies
View Related
Jun 19, 2012
How to import survey points from excel sheet into AutoCAD 2013?
View 2 Replies
View Related
