I have seen several posts about rotating a view on a sheet and the text not remaining readable.
I have seen the posts that say to rotate the view then add text... What if you didn't plan that far ahead - are you just stuck?
Is there any new developments on this?
I have a client who needs to be able to this without having to rotate all the text in the project.
When I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies View RelatedIm using AC 2008 LT Im developing dynimc blocks. When rotating the block the text will rotate as well. Is there any way to align the text to the view so it will be always straight when rotating?
View 3 Replies View RelatedDoes it possible to have two different view Titles in the same sheet? I have different room elevations which I need to show the drawing number, the view name and in place of the scale will be the room number; the overall views will have a view title with sheet reference.
View 1 Replies View RelatedI have been capturing data for measured building surveys with a Leica total station (TS06). When I upload the data into autocad i can see the node points (+) and text in the top view. When switch to look at the points from the front view (to produce an elevation), the text and points appear as a flat line, although the insertion point of the node/text is still correct. I need to find a way of rotating the text and points so they are visible in this view. I will then flatten the points and cut them to the top view to produce a 2d elevation.
we had a toolbar with a button to perform this function. However, now i don't have the toolbar,
I´m designing a sheet, but I've been running into some issues. First of all, I have some symbols on my view to describe some elements. I've been trying to add them to the sheet in a description table but I can´t copy them...is this possible or I would have to draw them again. Here is where I ran into another issue, cause those symbols are made with some styles of line that are not uploaded on my sheet, I went to Manage -> Additional Settings -> Line Styles and defined the new lines, but when I draw'em I can´t choose the new style, only the ones previously uploaded..
View 1 Replies View RelatedShould we be able to right click on a detail callout and choose insert on sheet?
View 1 Replies View RelatedIn Revit 2012, I have a plan view (overall, first floor) which is "Independent" but also shows another view as the "Referencing Sheet." When I visit the sheets referenced, I can't identify a reference. The problem is that the "Referencing Sheet" is showing in our title block and we'd prefer to show a blank for Independent views.
View 1 Replies View RelatedIve created a dwf with multiple sheets (an electrical set, in this example). I sent it to a client who marked it up in Autodesk Design Review and sent it back to me. I inserted it (insert/dwf markup) and it comes into the revit14 drawing file just fine but all the comments are on the SHEET and not in the view. This is very inconvenined becuase I must open the view, make the change, exit the view, edit the dwf comment and repeat over and over. How does one get/force the person doing the markup to work within the VIEW?
View 1 Replies View RelatedIn our company we currently model using coloured lines rather than the Revit desired black/white but we are more and more being asked to print the odd view on a sheet with coloured lines or a coloured 3d view.
As some of us have grown up on th edrawing board through to Revit we are so used to the coloured lines and feel that it gives the drawing depth and is so much easier to understand.
I have been trying every way to keep the coloured linies but using view templates. filters and phasing to enable me to change views quickly from coloured to black and then back but there is no easy quick transition especially as we can't use these to change standard linetypes.
Why Autodesk have made this such a difficult issue within revit... Now we can model in 3D, create schedules automatic yet Autocad is much better for plotting...
Why does Revit open an identical sheet view when loading a family? I end up with the same view open twice.
View 2 Replies View RelatedI'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
We have a problem in some of our views (mostly dependent views), Central file.We place normal annotation text (not littera) and everything looks fine.
Then it happens, random can take days, and noone tuch the views nor the text style, that the text duplicate itself up to 1-4 times, and also change its location on the view.(The text don't lie on each other, but spread around the view, but keeps the condition in location to each other from the origin texts that was placed)
When we have encounter this we have deleted the copys and placed the text right again and then it works for a while...everything repeats itself, and in the end (random timeflow) the text deletes itself completely.
Using Modify Sheet List Tab - Rows Panel - New. It will not add a new row to my Sheet List.
View 2 Replies View RelatedIs there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
In the AutoCAD layout, the View port cannot always be linked to the drawing view. How will the viewport is linked to the drawing view.
View 1 Replies View RelatedMy company has just upgraded from stone age AutoCAD to Civil3d 2013 and I've been tasked with figuring out the program.
What I am trying to do is realign my drawing so a line I drew is horizontal to the page. For example, I have a line at a 45 degree angle and I want to rotate my viewport so that line is now at a 0 degree angle. Is there a simple way to do this?
A follow up: I have my point labels set to be a 45 degree angle, will they be at a 45 degree angle when I realign the drawing or will they "rotate" along with the drawing?
I have a solid body .ipt that I have created an assembly from. Some of the parts in the solid body can rotate which in turn rotates them in the assembly which is great. The problem is I need to create a drawing of the parts of the assembly. If I create a base view of a part that rotates the view rotates also, but I do not want that. Is there a way to create a view that always "looks" at a surface of a part no matter what position it is in?
Using Inventor 2013
I am looking for a way to make front view of a tire look like it's rotating ... i.e. the tread is moving. I have tried moving the tread, but that didn't look right.
I have seen it done but can't recreate it. I have attached an example .
I'm having a real issue with Revit that I can't get my head around or find documentation on.
I have a model setup and linked a DWG file. The DWG is a topo survey drawn in real co-ordinates. The DWG is linked center to center then then I moved and rotated it to suit the orientation of my new building in Project North. See image 01.
I've then aquaired the co-ordinates from the DWG.
I've change to True North and rotated the view. See image 02
All seems to be OK. If I detach and re-attach this DWG using the shared co-ordinated it ends up in the correct place so I've started work on my model.
However, I've noticed that when I close and re-open my model or force ther DWG to reload it shifts position and rotates so I have to detach and reattach. See image 03
I've noticed that in Paint Tool SAI (which I really wish I could buy but I have no money) has two things I wish GIMP could do.
1: SAI has an ability to rotate the view without rotating the image itself.(rotating a graphics tablet to comfortably get the pen stroke right.) Is there any way this could be implemented into a new update of GIMP?
2: SAI has really good pressure sensitivity and natural *smooth* pressure strokes. I've kinda noticed GIMP is geared more towards Mouse/Touch pad art creation; is there any way to get pressure sensitivity into the program?
I'm afraid to use GIMP anymore because the whole program takes about 20 minutes to load, from clicking the application icon on my desktop. Once it's up though, it functions well. Even after I close it out, and end up clicking the application icon again, it takes another 20 minutes to load up.
Is it still not possible to rotate a custom pattern in Revit 2012?
View 4 Replies View RelatedI am currently working with a point cloud inside of revit. But, The point cloud comes into revit in a geospatialy correct position. Therefore, it is skewed and not near the origin where you would normally model in revit. I need to be able to rotate my project without actually changing the position of my objects.
I use CAD alot as well so the best way to describe this would be, in CAD, being able to set your UCS to an object, and then later on reseting your UCS to world.
The main purpose of all this is to be able to bring my floor plan into a sheet without it being rotated to the same orientation as the Pointcloud.
I am trying to rotate a 3dPolyline, so that I can check(view) the Z-value of vertices in the top-view mode.
The following is the example which I am trying to achieve.
The white 3dPolyline has vertices at each intersecting point with the contour lines. Each vertax has Z-value.
I want to rotate this white 3dPolyline in 3D, so that I can make the red 2dPolyline. (Z-value becomes Y-value)
And the start point of the white 3dPolyline becomes the left most point of the red line.
The end point of the white 3dPolyline becomes the right most point of the red line.
Currently, I am doing this by making a new 2dPolyline, manually inserting Z-values as Y-values.
But it looks like my code can be neater if I use TrnasformBy(Matrix3d.Projection).
I am not good with Geometry, so how to use this Matrix3d.Projection.
Need a quick code snippet to make this function? (preferably in C#)
I have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set. So the viewports for the sections are rotated 90 degrees and difficult to read on the screen. Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space?
I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup. This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible. And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.
If it's not possible, then it's not the end of the world. We have AutoCAD Architecture and AutoCAD LT 2012 & 2013.
I have a colleague who has counciled me that sometimes it makes sense to create mass-elements for complicated gabled roof elements. Since I am pretty darn new to Revit, I am bringing in some old 2D dwg information (plans and elevations) and I'm trying to use this information to generate an in-place mass that is my roof. I'm essentially extruding gabled roof information from this geometry. So far so good. But when I try to rotate this information I find the program unwilling to do this. I have a suspicion this has something to do with the fact this in-place mass is either being hosted by the intitial horiontal working plane, or it is "pinned" to something I don't want it to be pinned to.
View 9 Replies View RelatedI would like to rotate a nested family at the end of a reference line (which rotates about the origin). I attached the family.
View 9 Replies View RelatedI created a project with multiple linked Revit files in it and I'd like to rotate the models in their own files to be "North/South". I understand choosing between True North and Project North, but I can't tell which I'm supposed to rotate because when I rotate the actual model and bring it into the host file, it's not accurate. Am I to bring it in to the host and then rotate and move it into position and then publish the coordinates? I have tried that, but then when I go back to the linked file and import a AutoCAD background drawing by it's origin's, it doesn't line up.
Is there a tutorial online somewhere that describes the process for rotating a linked project file in its own file to be North/South and then import it to the host file and establish (publish) coordinates so everything works? Do I just need to re-export to AutoCAD to modify the origin point for the DWG file?
I know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.