Revit :: DWF Markup By Client Shows Up On Sheet Not View?
Sep 4, 2013
Ive created a dwf with multiple sheets (an electrical set, in this example). I sent it to a client who marked it up in Autodesk Design Review and sent it back to me. I inserted it (insert/dwf markup) and it comes into the revit14 drawing file just fine but all the comments are on the SHEET and not in the view. This is very inconvenined becuase I must open the view, make the change, exit the view, edit the dwf comment and repeat over and over. How does one get/force the person doing the markup to work within the VIEW?
View 1 Replies
ADVERTISEMENT
Nov 4, 2013
I'm currently Building a Library Technology Hub that has 3 story atrium. I'm trying to create a 3d camera view that shows the multiple levels that open to the atrium. However, only the 1st floor and mezanine floor (within 1st floor ceiling heights) are in my 3d view. The rendred view shows as if I have a solid ceiling across the entire 1st floor. I am almost positive that this is an issue with my camera settings since my 2nd and 3rd floors are cut around the atrium opening. I have clicked on almost every option in my properties menu and am at a loss!
Just btw, I'm an intermediate level, self-taught revit user (I have used it on a daily basis for about a year now). I'm no guru, but I'm quite savvy on making things work like I want them to.
I have attached a test render of the space. the "ceiling" should be open above my mezanine, and extend to desk at the right and the lounge seating at the left. However, it has rendered as a single plane.
View 2 Replies
View Related
Apr 2, 2013
Does it possible to have two different view Titles in the same sheet? I have different room elevations which I need to show the drawing number, the view name and in place of the scale will be the room number; the overall views will have a view title with sheet reference.
View 1 Replies
View Related
Dec 7, 2013
I´m designing a sheet, but I've been running into some issues. First of all, I have some symbols on my view to describe some elements. I've been trying to add them to the sheet in a description table but I can´t copy them...is this possible or I would have to draw them again. Here is where I ran into another issue, cause those symbols are made with some styles of line that are not uploaded on my sheet, I went to Manage -> Additional Settings -> Line Styles and defined the new lines, but when I draw'em I can´t choose the new style, only the ones previously uploaded..
View 1 Replies
View Related
Jun 19, 2013
Should we be able to right click on a detail callout and choose insert on sheet?
View 1 Replies
View Related
Apr 29, 2013
I have seen several posts about rotating a view on a sheet and the text not remaining readable.
I have seen the posts that say to rotate the view then add text... What if you didn't plan that far ahead - are you just stuck?
Is there any new developments on this?
I have a client who needs to be able to this without having to rotate all the text in the project.
View 6 Replies
View Related
Nov 29, 2012
In Revit 2012, I have a plan view (overall, first floor) which is "Independent" but also shows another view as the "Referencing Sheet." When I visit the sheets referenced, I can't identify a reference. The problem is that the "Referencing Sheet" is showing in our title block and we'd prefer to show a blank for Independent views.
View 1 Replies
View Related
Oct 14, 2013
In our company we currently model using coloured lines rather than the Revit desired black/white but we are more and more being asked to print the odd view on a sheet with coloured lines or a coloured 3d view.
As some of us have grown up on th edrawing board through to Revit we are so used to the coloured lines and feel that it gives the drawing depth and is so much easier to understand.
I have been trying every way to keep the coloured linies but using view templates. filters and phasing to enable me to change views quickly from coloured to black and then back but there is no easy quick transition especially as we can't use these to change standard linetypes.
Why Autodesk have made this such a difficult issue within revit... Now we can model in 3D, create schedules automatic yet Autocad is much better for plotting...
View 3 Replies
View Related
Jan 16, 2012
Why does Revit open an identical sheet view when loading a family? I end up with the same view open twice.
View 2 Replies
View Related
Jan 27, 2014
When I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies
View Related
Jan 13, 2014
I have an assembly with a client feature that contains client graphics. I have exposed the visibility (ClientFeature.Definition.ClientGraphicsCollection[1].Visible) to the user via a context menu option. Changing the visibility currently affects all view representations. Is there a way to associate the visibility with each design view representation?
View 5 Replies
View Related
Feb 10, 2013
I'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
View 7 Replies
View Related
Jul 24, 2012
Using Modify Sheet List Tab - Rows Panel - New. It will not add a new row to my Sheet List.
View 2 Replies
View Related
Feb 28, 2012
Any way to stop the recently opened Sheets Sets from showing up? To me, it's highly irritating and they always crowd out my .dwg's. All you have to do is open any sheet file and the Sheet Set Manager opens automatically.
View 5 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
Aug 11, 2012
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
View 2 Replies
View Related
Jun 23, 2013
In the AutoCAD layout, the View port cannot always be linked to the drawing view. How will the viewport is linked to the drawing view.
View 1 Replies
View Related
Jun 19, 2012
I have a PDF file that contains an image, this image is angled at 10 degrees and is changed every week.
USING Ps CS5 & Acrobat Pro X...I open the PDF select the image markup tool, select the image to be changed, right mouse click and select 'edit image'.The image opens in PS CS5, I do the changes and save the file, the PDF updates.
USING Ps CS6 & Acrobat Pro X..I open the PDF select the image markup tool, select the image to be changed, right mouse click and select 'edit image'. The image opens in PS CS6, I do the changes and save the file, the PDF updates BUT STAIGHTENS IT, REMOVING THE 10 DEGREE ANGLE!
I went back to CS5 to test this and it works perfectly angle remains, image updates?
View 3 Replies
View Related
Jan 18, 2013
Is there a reference of the markup that is used with formatted text on drawings?
View 1 Replies
View Related
Oct 26, 2011
Recently I have had two assemblies change at random times to a monochrome color and I cannot change them back to their respective colors. I can open sub-assemblies and they show as the correct color but when I close them the main assembly and the recently open sub-assembly go back to monochrome. When placed on a drawing sheet they appear the correct color on the screen and printed in color. The Visual Style is Shaded With Edges.
System:
Intel Core T7700 @ 2.40 GHz
8 GB RAM
250 GB SSD
NVidia Quadro FX 1600M
View 6 Replies
View Related
May 31, 2012
I've got a weird issue. Just spent some time on fixing up my logo. Ended up using both Text and creating my own/warping existing text to make the font.
Looks ok.
But anyways, I have a little bit of an issue. The center of the O (font not hand made) is not showing in NORMAL view but shows just fine in Wireframe.
View 9 Replies
View Related
May 18, 2012
why my interior rendering scenes just show up black. I have opened up projects from previous releases that I was able to get interior scenes to render correctly and they render fine in 2013. I've imported the modified fixtures to the current projects file and they still don't do anything. The scene I'm talking about has a ceiling modeled on the underside of a floor. I've read this may be an issue, but my light fixtures light source is to be 1/4" above the plane of the ceiling. In my case, it's a 5/8" layer of drywall.
View 9 Replies
View Related
Aug 8, 2012
I am very new to Revit (3 days) but am having an issue with the graphics display. When I start a new project from any of the preinstalled templates, the shaded views (with or without edges) do not show any shading and only display HLR. When I create a new family, or open a project from the tutorial downloads, the shading works. Is there a project setting that I am missing? Creating a render of the view shows proper shading/materials, just in the design phase it does not show.
View 4 Replies
View Related
Jul 27, 2011
First of all I have noticed that there are (2) keynote areas in my wall type object properties dialogue box and the only one that works when I go to tag it with a keynote is the number keynote. How do I get the text keynote to work within the wall type object properties? note I am trying out creating keynotes within objects rather than having them point to a text editor.
View 6 Replies
View Related
Feb 25, 2013
Elevations existing ground gives in the band not the correct value, I putted everything in meters but it still doesn t match with the label that gives the correct elevation, same problem with the offset distance in the band.
View 4 Replies
View Related
Nov 29, 2011
Trying to do two variations of an assembly using representations. I turned sub-assemblies off in different representations by unchecking "visibility." I can switch back and forth between representations in the assemby and the sub-assemblies go on and off, but drawing views where I've selected a given representation still show the "invisible" assemblies.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 6 Replies
View Related
Oct 31, 2012
I have a drawing that I created (.dwg) in Inventor 2013 that, when opened, is completely blank. However, when in the File>Open dialog box, I can click on the name of the drawing and the preview shows the complete drawing with all views fully dimensioned. I closed Inventor, laucned AutoCAD and tried opening the same file and it was still blank (no views). I then closed that file and open the old version of the file from the, "OldVersions" folder with Autocad and all the views and dimensions were there.
So I launced Inventor again and reopened the offending print and noticed that the model is not shown in the drawing's model tree. I'm 100% positive that I did not delete this model/view from the drawing before saving the file. This is a small drawing and it will only take me a few mintues to recreate it.
I'm using Inventor 2013, SP1.1
Windows 7 64 Bit
Dell M6600
Nvidia Quadro 5010M
View 4 Replies
View Related
Apr 2, 2010
Sometimes when I view vector art on the screen the letter I shows up extra wide and big, but the printed version works fine. Example below. This only happens some of the time to me, but not always with the same piece of artwork. I think this must be a common problem.
View 8 Replies
View Related
Nov 1, 2012
I have designed a layout in Illustrator (CS5.1) for a webpage. I save for web with transparency and when I view in a browser there is a gray outline of the artboard from illustrator. How to remove this outline?
View 1 Replies
View Related
Oct 30, 2012
I run a HP DV6 Laptop with Core I7 and Windows 7. While editing my photos my computer appeared to over heat (which is a recurring issue that I'm working to resolve) during mid-post production. Upon restarting my computer, and when I accessed the same photos, I got a very lengthy loading icon when I clicked on a photo under the "Develop" tab. This problem recurred and in attempt to resolve the problem I decided to delete the library and re-import the files. Upon re-import, I cannot view all the photos in the library grid view. I'm not sure if my files are now corrupt from the sudden crash or is it just a data issue with LR?
I've attached a screen shot of what the problem library looks like...
View 1 Replies
View Related
