Revit :: Annotation Text Duplicates And Change Position On View
Sep 5, 2011
We have a problem in some of our views (mostly dependent views), Central file.We place normal annotation text (not littera) and everything looks fine.
Then it happens, random can take days, and noone tuch the views nor the text style, that the text duplicate itself up to 1-4 times, and also change its location on the view.(The text don't lie on each other, but spread around the view, but keeps the condition in location to each other from the origin texts that was placed)
When we have encounter this we have deleted the copys and placed the text right again and then it works for a while...everything repeats itself, and in the end (random timeflow) the text deletes itself completely.
View 1 Replies
ADVERTISEMENT
Jul 8, 2011
If I have several sheets of several floors, and I want the views in each sheet to be positioned at exactly the same position. How do I best accomplish that?
You can use the "Guide Grid" to place the views on a sheet. Then you can align the view (using the grid lines) to this guide grid. In the other sheets, you can use again the same guide grid, just select the guide grid name in the properties of the sheet.
Additional information about guide grid is available in the Revit help, search for "Aligning views on a sheet" or "Guide Grid".
View 6 Replies
View Related
Nov 10, 2013
I installed an application into revit 2012, now it has shoved itself up to the left most tab and is interfering with my workflow.
Can I change the tab position on the ribbon so the application tab is always far right?
Using Revit 2012
View 2 Replies
View Related
Jan 31, 2013
I have a plan view where I want to show the door openings but I want the section view w/ the doors closed. I can't seem to get inventor to do this.
View 1 Replies
View Related
Mar 11, 2013
I have a site survey which has existing spot heights all over it using MICRO text. I am marking in new spot heights so want a text style which is different, but not over powering.
Currently I am using Browallia UPC which looks like a good style match, however the text looks like its set to SUPER BOLD or something, because when I do a test print it visually dominates the entire drawing.
Is there a way of changing the "boldness" of a text style?
View 5 Replies
View Related
Oct 17, 2013
Is there any way to change the position in which the leader arrow attaches to the tag? I want the arrow to come from the top left and bottom right.. Is there away to set this up? As you can see, by default, it comes from the center. I was hoping there would be some adjustability on this.
View 7 Replies
View Related
Apr 18, 2013
I have a set of drawings (19) with a lot of annotations, however I have to change them according to the original text:
Example: Return Air Drive by RAR, Sump by SMP etc. How is possible to select ALL the annotation with the same text and change them for the new ones? Every time that I select by text, either the MultiText or the Multileader objects are selected correctly but I can change only one at the time. Is there anyway to do the changing process in one shot for Text or Multitext with the same contents?
View 3 Replies
View Related
Jun 22, 2011
in Autocad when you change the justification of text the insert snap of the text stays fixed and the text changes position around this point.
Using the JUSTIFYTEXT command you can change the justification of the text without changing its position. However this command is operated through the command bar of dynamic input. What I would like to do is to have the justification change in the quick properties this way.
View 9 Replies
View Related
Nov 14, 2011
Is there any way of adjusting the text on a level?
View 2 Replies
View Related
Jun 18, 2012
I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
View 2 Replies
View Related
May 25, 2012
I've seen umpteen explanations of how to change lineweights in Revit.None of them address this simple thing I'm trying to do.
I just want to:
1. Create a few lilnestyles that appear along side the other line styles - for instance:
Thin Line, Medium Line, Thick Line, <<Really Thick Line, >> <<Absurdly Thick Line,>> etc, etc..
2. Draw a line
3. Click on the line
4. Select from a drop down list, "Absurdly Thick Line" and have it instantly inherit the linestyle I created.
The only way I can do this is to create a family, make a new subcategory of Detail Items, create the characteristics I want in the line, export it as a .dwg file, then import it into Revit - and then I see the new line style along side the other line styles, and I can then select any line and make it the new line style.
Certainly, there is an easy to find, simple, straightforward way to add line styles to the existing group - and have those new line styles become immediately accessible from the "Modify Lines" Linestyle Drop down Menu.
View 1 Replies
View Related
Apr 26, 2012
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Jan 10, 2013
I cannot change the leader text position to be aligned next to the leader line, the text is positioned offset from the line, how do I correct this .
See attached image.
View 3 Replies
View Related
Oct 30, 2012
Is there a way to change the level that a floor plan view is associated to?
View 4 Replies
View Related
Dec 22, 2011
How do you change the direction of a model hatch that is seen in 3D view?
I want to change the pattern of wood planking that goes horizontally to go vertically (in plan view).
View 2 Replies
View Related
Apr 29, 2013
I have seen several posts about rotating a view on a sheet and the text not remaining readable.
I have seen the posts that say to rotate the view then add text... What if you didn't plan that far ahead - are you just stuck?
Is there any new developments on this?
I have a client who needs to be able to this without having to rotate all the text in the project.
View 6 Replies
View Related
Jun 22, 2013
If you have a large project and many outside walls have large sections that are the same can you create exterior dimensions on a number of different levels that are tied together. In other words they are the same annotation done once for all those levels without cutting and pasting or doing the same dimensioning on the different levels, which is very error prone and the chances of different dimsions showing on different levels that are supposed to be the same is very large.
I am thinking of something like bing able to x-ref the dimensions like you can do in autocad. Is anything like this posssible in Revit?
View 4 Replies
View Related
Dec 11, 2012
I am used to Autocad Architecture where I typically detail out my sections. I show the top and bottom plates, gypsum wallboard, beam sections, ACT tile layout, etc...
In Revit, the annotation scale seems to be too small to make it look good. I just get thick lines at 1/4" scale - looks sloppy. I have detail set to fine, but it does not seem to do anything until I set the scale to 1-1/2"=1'-0" or greater.
How to actually take a section from start to finish on the sheet. Everyone just shows how you put the section mark down and it automatically creates a section view.... Thats great but there is a lot more to do in my mind, I think I know how to add the callouts and annotation but it does not seem very good if I am not pointing at the insulation or pointing to the beam, etc.
View 1 Replies
View Related
Jun 21, 2012
I'd like to customize the way our section marker terminators look. More like an architactual style drawing.
I'd also like to add the sheet number that the section is cut from to the section view label.
As far as I can tell, this propertie is not available for insertion in the view lable. Is there a way to make it available?
The need for these changes come from larger drawing sets were the section is cut on one sheet and shown on another. We'd like to link the sheet numbers in both the section marker terminator and view label.
View 4 Replies
View Related
Mar 3, 2013
I created a AI tool plugin, when use the tool, I hope press mouse left key and drag in document view, AI will draw a rectangle, when mouse up, the rectangle disappears, just like ordinary select tool. So I wrote a class to implement AIAnnotation, during mouse drag, just let the annotation been invalidated. but I see nothing displayed. In the draw funtion I just use DefineClipStart() and then draw a rectangle using AIAnnotation drawer, at last call DefineClipEnd(). After mouse up call ClearClip().
View 2 Replies
View Related
Feb 10, 2009
Is it possible to add a rotation control to an annotation family like the ones in elevation tags?
View 2 Replies
View Related
Oct 25, 2012
I've had a request from on of our users to replicate something that has been done for years in 2D CAD. They want a marker to show changes in floor levels that look something like this:-
The annotation needs to be able to read the slab on either side of the step marker and hopefully if possible the difference be represented as text. The datum levels are secondary and it is really the depth of the step that seems to be more important. I do however want to avoid these being just dumb text as if/when the design evolves someone will forget to modify the text.
Here is an example of a few showing two steps in the slab and the results we would want.
I have tried loading/nesting a standard spot level in thinking if I had two in an annotation that this might work, but I was unable to even place a spot marker within the family which makes some sense I suppose.
Is this even technically possible...? I realize the origin usually determines what hosts the family and how, but I guess we are looking for something with a double origin, which is why I think this may not be possible...?
View 3 Replies
View Related
Aug 17, 2012
we have this issue that has affected us in Revit 2011 and 2012. For many of our families we have a 3D object, a 2d representation of symbolic lines, and then some editable text/annotation:
- The text is a Generic Annotation annotation family, with a single label, set to display the parameter "Text Frame"
- This family is then inserted into the family of the specific object being created, with, under label's Type Properties, the "Text Frame" of the label being linked with a "Text" parameter in the object family.
This seems to work all fine and dandy, however, we're getting an interesting problem: after working in the file for a while some percentage of the annotation on these families disappear in a view. Sometimes it's just a few, sometimes half, sometimes all of them just go away (everything else, including the symbolic lines, are still there). If you close the file and re-open, they will re-appear. If you nudge them, they will re-appear. Other views may still have them, at least for a time... then they too will dissapear.
This happens both on screen and, dangerously, during printing. You print a whole set, only to discover much of your annotation for objects is gone... (not to mention the cost and waste of trees when you re-print).
Is this a known problem (search only turned up one thread on this), or is there another way to do what I want (have editable annotation on a family) that avoids this issue and I stubmled onto the improper way of doing it?
View 9 Replies
View Related
Jan 30, 2013
I would like to embed a tag as generic annotation within a family so that I can control the visibility of the tag based upon a type shared parameter within the family. However, when I rotate or mirror the family the text and labels within the tag change positions, go backwards, flip upside down, no matter what combiniation of "Keep readable" and Rotate with "Rotate with component" I try.I would like to have the tag look, regardless of which direction the family is facing. How to either:
1. Make the embedded generic annotation maintain the correct orientation
2. Control a tags visibility based upon a shared parameter within the associated family?
View 6 Replies
View Related
Jul 29, 2012
We have just made the switch to Revit 2013 and the first order of business is creating a template. I, as is my entire office, is learning as we go. I have followed the No Experience Necessary Revit book which was fantastic.
Now, at the beginning of creating my template I am stuck.
I edited the elevation marker and saved a new copy into my standards / prototype folder on my server. I customized it to look just like our CAD elevation marker, great...
I have the family loaded in the template.
Now when someone clicks on the elevation marker in the ribbon how do I get it to load mine instead of the default Revit one? Otherwise, I know I am going to find inconsistencies on our drawings as staff goes to that button.
View 4 Replies
View Related
Feb 4, 2013
So I am trying to edit certain text features dealing with stationing in one profile view (for example I don't want any stationing on the top of the profile view). How do I do this so it will just affect the noted profile view and not delete the stationing on all of my profile views in this drawing.
View 4 Replies
View Related
Jun 19, 2012
Why is there not a Display Order function within a Generic Annotation family, or am I missing this? Specifically when you Mask an area but want some linework graphics in the family to display on top of it.
View 1 Replies
View Related
Jul 2, 2013
I have an annotation family with about ten different types built into it. When I import this into a project, the Arrowhead option (in the Type Properties) of each type is set to 'none'. I do not see anywhere in the family editor to set that value to 20 Degrees Filled. Is there a way to accomplish this, or must I set the arrowhead values each time I load a tag (which seems absurd and redundant).
View 4 Replies
View Related
Oct 1, 2012
Is there a way to change the color of the dimension text?
I wanted to have the color of the dimension text different from the dimension line but couldn’t find where such option might be found.
View 4 Replies
View Related
Jun 26, 2013
Is it possible to place the surface area of an annotation fill, into a schedule?
View 1 Replies
View Related
Jul 26, 2013
I'm an Archicad User and I'm evaluating Revit at the moment as I'm interested in a better integration with other Autodesk products.I have two questions though that Google and the Docs couldn't answer me.
1- I have an Annotated Region (a polygon), how can I annotate an angled measure of an edge? I've tried the aligned dimension tool and this link: URL....
2- What's the proper way to join a point of an edge to another edge without changing the length? (somehow to 'rotate' an edge around one point and 'snap' the other point to another edge). I'm using a circle tool and snapping to intersection at the moment.
Also, I know this isn't the best place to ask, but is Revit worth the change? I mean, i'm completely satisfied with Archicad and so far Revit isn't very intuitive at all and the workflow seems it's never going to be on-par with Archicad, I'm considering the change solely for the fact that Revit may have a much better integration with AutoCAD, AutoCAD MEP, and other Autodesk softwares.
View 3 Replies
View Related
