Is there any way to change the position in which the leader arrow attaches to the tag? I want the arrow to come from the top left and bottom right.. Is there away to set this up? As you can see, by default, it comes from the center. I was hoping there would be some adjustability on this.
View 7 Replieshow can I change the default arrowhead size from 3/32 to 5/32... I am able to change it from the palettes only after I insert it.
I would like to have all leaders of all styles match the same style far as arrowhead size... multi-leaders are defaulted as 5/32 and after using them forwe like them this size verses the 3/32 size of the quick leader.
I cannot change the leader text position to be aligned next to the leader line, the text is positioned offset from the line, how do I correct this .
See attached image.
Is there a way to have the Arrow leader convert to Loop leader in one click. Our company standards use diamond tags and sometimes i have to change the arrow to loop by inserting a leader.
View 9 Replies View Relatedwhy doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedI would like to add a Leader Text to lable a part- referencing the Part Number or whatever, move the text close to the edge of the part, to remove the leader/arrow and make the txt rotate 90deg to be vertical. I have messed with style settings for a new Vertical Txt style, and Vert Dim style -(pointed to the Vert Txt style and adjusted Notes and Leaders tab)
i don't understand why in the Format Text window the "rotation" box is always grayed out. can you unlock it?
I installed an application into revit 2012, now it has shoved itself up to the left most tab and is interfering with my workflow.
Can I change the tab position on the ribbon so the application tab is always far right?
Using Revit 2012
We have a problem in some of our views (mostly dependent views), Central file.We place normal annotation text (not littera) and everything looks fine.
Then it happens, random can take days, and noone tuch the views nor the text style, that the text duplicate itself up to 1-4 times, and also change its location on the view.(The text don't lie on each other, but spread around the view, but keeps the condition in location to each other from the origin texts that was placed)
When we have encounter this we have deleted the copys and placed the text right again and then it works for a while...everything repeats itself, and in the end (random timeflow) the text deletes itself completely.
I am trying to draw dimension leader arrows. I start "_LE QLEADER" and go to settings and tell it I want my arrowhead to be "closed filled". I draw the arrow, and it comes up as a "DOT" arrow.
I can change this in the Properties, but who wants to do that every time? When I go back to "_LE QLEADER" and go to settings, the arrow block is set back to DOT, even though I just changed it to "closed filled".
I used "rename" to rename my "closed filled" block to "dsfsdfsdf", in case the block got redefined somehow.My dimblk is set to "", as are dimblk1 and dimblk2. Tried both setting of dimsah as well.
I do not see any "CExxxxxx" variable which might control this.
using acad 2010. i know there an option to align the text heads in aleader, but i want the opposite, i want to align the arrow heads since i use itas constriction section see the attached drawing
View 3 Replies View Relatedi am trying to learn it by myself. That's why i am facing some problems. Some of them are listed bellow.
1. How can i get more hatch items?
2. How can i increase LEADER's arrow size?
3. Whats the different between MODEL & LAYOUTS (1 & 2)?
4. Why Hidden line(.5x) not hidden in MODEL?
5. Why Dashed(D2) not shown as dashed in MODEL?
I just started at this drafting job and inherited most of the graphics from others. Version: AutoCAD LT 2010.
Some of the leaders on my drawing somehow changed so that the arrowheads do not show. When I began working on the drawing, the arrowheads were fine, but while I have been working on the drawing, all of a sudden these leaders changed this property.
The properties manager lists these problem leaders as "line with no arrow." Although there is a drop-down menu to choose things like "line with arrow," the "no arrow" option does not change when I pick anything else.
I created a leader with _DOT arrow using .NET, the size of leaderhead is 0.18" in default. I want to change to other sizes but I did not find the key word. How to set arrow size of leader.
View 2 Replies View RelatedI want to change the Arrow Side Position for Weld Symbols from Top to Bottom for all future drawings. I have opened the Drawing Template (Standard.idw) and opened the Styles Editor and switched the Arrow Side Position and saved the template. Then I have tested. In the template it works good, but when I open a new drawing (based on the template) the arrow side position didn't change.
View 4 Replies View RelatedIs there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
When I "move a dimension with Leader" is there a way to create an arrowhead on the create3d leader. After I create a Linear Dimension I select it and hover over the blue box in the dimension text and select 'Move with Leader" and the leader does not have an arrowhead. Is there an easy way to do this? Autocad 2012.
View 4 Replies View RelatedMleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
My leader for my room tag is waaayy far away from my tag. The leader/border offset is set to 0, but that doesn't resolve the issue. (the leader and tag are in blue on the png)
View 2 Replies View RelatedWhenever I tag an item the end of the leaderhead like the dot or the arrow finds a point and sticks to it even if that is not where I want to point. Is there anyway to move or override this point location?
View 2 Replies View RelatedRemoving tag leader, I couldn’t know how to remove the leader of the tag from its family. How this might be done?
View 5 Replies View RelatedI am working with room tags that has multiple yes/no features. my problem is its hard aligning text because they wont snap to centers or refernece lines. How are people working with this. It causes for sometimes the leader line when used to not want to be straight or leaves some funky angle when change scale
View 1 Replies View RelatedI am trying to find a way to control the leader line of a multi-category tag such that the second line of the leader is horizontal - my users are spending too much time to make our leaders look better than "sloppy".
I do have a Keynote family that can accomplish this but I cannot find the same for the multi-category tag. And I cannot find a way to make my Keynote tag a multi-category tag.
I have created a couple text styles which are identical other than the fact that one has pointers using filled arrows whilst the other has filled dots. However when exported to dwfx, the arrows appear whereas the dots are absent!
View 1 Replies View RelatedIs there a way to close the space between the Room Tag leader and the room number box? See the attached png file.
This gap seems to get larger if the room name is larger.
how can i display an arrow path on ramp?
View 4 Replies View Relatedhow to change the thickness of leader lines. I'm editing a drawing done by someone else and I need to make the leader lines thicker. I tried changing the layer thickness and making sure the settings were such that the leader line thickness would be determined by the layer. I also tried channging the leader line thickness in properties and/or leader styles, but no luck there either.
View 6 Replies View RelatedI have currently made a nested family for a basketball system and have a problem when i flex my elevation. As you can see my bracing that the Red arrow is pointing to is not flexing properly.. However when I edit the family its in, I have it constrained and it flexes no problem.
View 5 Replies View RelatedI am working with Revit 2013 and wondering how (if it is possible) to set Section line in right position "X, Y" (coordinates).
View 2 Replies View RelatedI want to change the radius using (Right Arrow) but now it's only letting me choose to 1 radius and nothing in between.
View 10 Replies View RelatedMy text style height is set to 1/8, however my leader text height is 3/16. How do I change the leader text height? T
View 6 Replies View Related