Revit :: Display Arrow Path On Ramp?
Feb 6, 2009how can i display an arrow path on ramp?
View 4 Replies
ADVERTISEMENT
Revit :: Copy Path Of Ramp Into New File
Oct 30, 2010I am totally new to Revit...basically teaching myself with this project. I need to create a ramp that goes from -1 level to ground, 12 feet up. I have created the walls for the path but I cannot, for the life, figure out a ramp. I have tried but I guess I don't understand how it works. I tried making a straight path with switch backs but I can't get that to work well either and that's not the design I want anyway. I copied the path of the ramp into a new file, which I have attached.
View 4 Replies View RelatedRevit :: How To Find Out Ramp Quantity
Oct 25, 2011Is there any way out to find out ramp quantity in revit architecture?
View 2 Replies View RelatedRevit :: 2 Way Slope Of Parking Ramp
Mar 4, 2013I'm using the floor to build the parking ramp. The ramp slopes down from west to east. I used the slope arrow to achieve it.
But I just found out today that that parking ramp also slopes down from north to south at the same time because of the sloped site.
So, how can do a 2 way slope at the same time? I tried to add the 2nd sloped arrow but that option is greyed out.
Photoshop :: Mac CS5 Doesn't Display Double Quotation Mark But Display Double Arrow?
Sep 25, 2012Everytime i press the shift key and quotation mark key for the double quotation mark to display on my text on PS cs5 doesn't work. It display a double arrow instead.
View 4 Replies View RelatedIllustrator Scripting :: How To Add Arrow Heads To A Path With Script (JavaScript Or VBScript)
Apr 22, 2013I'm using Illustrator CS 6 / ExtendScript Toolkit CS 6.
Is there any way to add arrowheads to a path with script (JavaScript or VBScript)? I don't want to make triangle or V-shaped path but add one of the built-in start and end arrowheads, scale them and set arrowhead alignment, all with script. There is no information about this topic in the Illustrator scripting references.
Revit :: Column Display At Different Display Levels?
Nov 1, 2012Quick explanation of how to make columns display as columns in the coarse level of detail instead of just as sticks?
I know I'll have to edit the family but I can see anything obvious to change.
Revit :: Dot Arrow Heads Not Printing?
Jul 3, 2012I have created a couple text styles which are identical other than the fact that one has pointers using filled arrows whilst the other has filled dots. However when exported to dwfx, the arrows appear whereas the dots are absent!
View 1 Replies View RelatedRevit :: Change Position In Which Leader Arrow Attaches To Tag?
Oct 17, 2013Is there any way to change the position in which the leader arrow attaches to the tag? I want the arrow to come from the top left and bottom right.. Is there away to set this up? As you can see, by default, it comes from the center. I was hoping there would be some adjustability on this.
View 7 Replies View RelatedRevit :: Nested Family - Red Arrow Pointing To Is Not Flexing Properly
Aug 22, 2013I have currently made a nested family for a basketball system and have a problem when i flex my elevation. As you can see my bracing that the Red arrow is pointing to is not flexing properly.. However when I edit the family its in, I have it constrained and it flexes no problem.
View 5 Replies View RelatedAutoCAD 2013 :: Why Doesn't Arrow Leader Disappear When Flip Arrow Direction To Inside
Dec 11, 2012why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
AutoCAD .NET :: How To Create A Block With A Att For Display Path Of Xref
Jul 17, 2012i looking a way for create a block after selected a Xref.
It is for display the path+Name of my Xref.
It use fields manualy put i can copy/paste the bloc. (ObjectId not egual in a 2 dwg).
I want :
1 - selec the Xref --> I know how to do that.
2 - create a bloc --> I know.
3 - create a att -> i know
4 - fill the att with the field --> ???
AutoCad :: Auto Track Alignment Path Display
Feb 5, 2013how AutoTrack displays alignment paths
View 4 Replies View RelatedAutoCAD 2013 :: Display The Full Path In The Title Error?
May 9, 2012I like to have the path display in the title bar at the top of the screen. I check the box to display it in options. It works! But the text is almost illegible in the title bar. The title bar is black, the text is black with some cloudy grey background. It is impossible to read. I can't seem to find anyplace to change it's appearance either.
View 4 Replies View RelatedAutoCad :: How To Display Full Drawing Path In Window Header
Feb 5, 2013A co-worker asked how to display the full drawing path in the window header. He said that it used to, now doesn't. I have never seen the full path of the drawing in the header before. Mine just says "AutoCAD Civil 3D 2013 (Drawing File Name) [Project Folder]"
I checked in Options, but didn't see anything.
Photoshop :: Add Image Ramp In A Certain Way?
Sep 14, 2012i want to add to this image a ramp effect starting from the center to the bottom, the start colour must be like the center and gradually become black at the bottom... but must looks like all natural without horrible cut or different colour etc it's possible? i suppose yes, but how?
View 11 Replies View RelatedAutoCAD 2010 :: Building A Ramp In 3d?
Feb 13, 2013I am trying to bild a ramp in 3d but i've been trying with no success, the ramp have a non common shape. pls look at the acad file to take a loot at the shape.
I need to have the top part at 5531mm and the bottom part at 0 and there is another part which is at 5035mm you can see that in the drrong and the ramp must 100mm thick or something similar. also i need to do it as a solid becouse i need to export it on a different software which only ecrpts solids.
AutoCAD Civil 3D :: Merge A Ramp Using Corridors
Jan 14, 2013How do you merge a ramp on to the main highway using corridors? Also how would you make that surface with two different alignments? I have my main road alignment and a ramp that comes on to it so the problem I'm having is making my 3d model with the road and surface combine.
View 9 Replies View RelatedAutoCad :: Ramp And Twist Fillet On Column
Oct 21, 2011I have a problem I am using Autocad lite 2011 and need to draw if you can picture a column with a 15 mm deep fillet 42 mm wide which has a ramp and twist applied to it spiraling all the way up it. How do i go about this.
View 9 Replies View RelatedAutoCad :: How To Make A Ramp In Floor Plans
Oct 22, 2012How to make a ramp in floor plans ?
View 2 Replies View RelatedAfter Effects :: How To Make A Ramp Effect On Other Layers
Mar 21, 2013I'm trying to create a lower thirds that will include some motion, otherwise I might try Photoshop for this. But basically, I'm trying to create a gradient using ramp in AE so that the lower thrids I've created fades away on the sides. Similar to the image I've attached. I don't know how to make the layer that I put the ramp effect on affect the other layers.
View 3 Replies View RelatedRevit :: How To Change Unit Display
Mar 1, 2012 The properties unit of all my Revit's door, wall, windows..etc is millimeter. How do I change it back to inch and feet?It was also strange that when I opened some files, the unit became inch and feet. The units of doors, windows, etc became inch and feet.
However, when I create a new project, the unit becomes millimeter again.
Revit :: Demolition Display In Plan?
Apr 4, 2013I have a renovation project that I have entered the building in a existing phase. I used the demolition tool to show work removed on a demo plan. I created a new construction plan and set the phase to "New Construction and the phase filter to "Show previous + new" . The problem is that all work to be demolished appears as existing and new work appears on the demo plan as existing.
View 2 Replies View Related3ds Max :: Nitrous Display Of Revit Models
May 3, 2011When I import a dwg model exported from Revit, the curtain walls (frames and glass pannels) do not display with Nitrous. They are there and can be selected from the layer manager. They are visible if I add an Editable Mesh modifier.
DirectX and OpenGL display properly.
FBX import display properly
Revit :: How To Set Two Floors To Display As Translucent
Jan 14, 2013I'm new to Revit, and some how have set two floors to display as translucent - I've checked online, but have not found how to correct this.
Can somone tell me what I have done wrong - and how to fix it?
3ds Max :: Gradient Ramp Doesn't Show As Viewport Background?
May 16, 2011I wanna confirm this bug. I'm almost sure it's generalized but who knows. But in most systems I've tried I couldn't get Gradient Ramp to show as viewport background when using Nitrous.
System specs vary greatly from Mac Pros to Dells and ATI and Geforces and one QuadroFX 3700. Most with recent graphic drivers.
AutoCad 3D :: Kerb Stone Which Includes Pedestrian Ramp
Apr 19, 2013Im doing a 3D design of kerb stone which includes a pedestrian ramp.
Please refer to my picture.
The kerb stone I have issues with is the one I have provided dimensions for. From the right edge, the height of the stone is 225mm, then is slopes down to 110mm. But what I could acchive is that the right 100mm I have shown is meant to be 75mm which the back stays at 110mm. Is there a way I can achieve this?
AutoCad 2D :: Grading Plan For RAMP And Loop For Bridge
Oct 27, 2013Looking for grading plan for RAMP and Loop for bridge.
View 3 Replies View RelatedRevit :: Display Message Upon Opening File?
Feb 3, 2012I am wondering if it is possible to have a message (note) appear upon the opening of a file? I would like to write notes about the files we are working with, so that succeeding users don't alter information parameters mistakenly, or get confused about the orientaion of a component, etc. etc. etc.
View 3 Replies View RelatedRevit :: Family Data Detail Display?
Jul 18, 2011Is there any option to show all the data of a family according to the attached jpg?
View 3 Replies View RelatedRevit :: Material Display When Cutting With Void?
Oct 6, 2013When adding an element, say a door, to something like a wall, if there is a void within the door and everything is set properly to cut out a section of the wall, what is the resultant material colour that you see at the cut?
I've been trying this out and in the Realistic display mode, when I have a door with a recess profile around the frame, in brick I see the brick colour, but in plaster I see a grey which isn't the same as the default plaster colour?
The recess is 12mm into 12.5mm plaster.