AutoCad 2D :: Grading Plan For RAMP And Loop For Bridge
Oct 27, 2013Looking for grading plan for RAMP and Loop for bridge.
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Create Grading Plan For Solar PV Site Or Golf Course?
Feb 28, 2013how to use Civil 3D to create a grading plan for a solar PV site or a golf course?
Here is the situation. We have a large 100 acre site that is not flat. We want to do minimal grading to "smooth out the surface". So that maximum slope on the site is 10%. The site does not have to be graded completely flat. We are trying to work with the existing contours and terrain as much as possible.
Is there some functiion or some way for Civil 3D to "smooth out a surface"? We want to work with the existing slopes and contours of the site and just need a grading plan that will smooth out mounds, holes, or high slope areas.
AutoCAD Civil 3D :: Infill Grading VS Feature Line Grading
Dec 24, 2013"An infill grading has no criteria applied to it. Any area bounded by feature lines or lot lines that is not already a grading can be converted to an infill grading."
So given an area enclosed by a feature line, an infill grading can be created. Using the same features line, an feature line grading can also be created. what is the difference between these two surfaces? They both have no criteria applied to them.
AutoCAD 2010 :: Building A Ramp In 3d?
Feb 13, 2013I am trying to bild a ramp in 3d but i've been trying with no success, the ramp have a non common shape. pls look at the acad file to take a loot at the shape.
I need to have the top part at 5531mm and the bottom part at 0 and there is another part which is at 5035mm you can see that in the drrong and the ramp must 100mm thick or something similar. also i need to do it as a solid becouse i need to export it on a different software which only ecrpts solids.
AutoCAD Civil 3D :: Merge A Ramp Using Corridors
Jan 14, 2013How do you merge a ramp on to the main highway using corridors? Also how would you make that surface with two different alignments? I have my main road alignment and a ramp that comes on to it so the problem I'm having is making my 3d model with the road and surface combine.
View 9 Replies View RelatedAutoCad :: Ramp And Twist Fillet On Column
Oct 21, 2011I have a problem I am using Autocad lite 2011 and need to draw if you can picture a column with a 15 mm deep fillet 42 mm wide which has a ramp and twist applied to it spiraling all the way up it. How do i go about this.
View 9 Replies View RelatedAutoCad :: How To Make A Ramp In Floor Plans
Oct 22, 2012How to make a ramp in floor plans ?
View 2 Replies View RelatedAutoCad 3D :: Kerb Stone Which Includes Pedestrian Ramp
Apr 19, 2013Im doing a 3D design of kerb stone which includes a pedestrian ramp.
Please refer to my picture.
The kerb stone I have issues with is the one I have provided dimensions for. From the right edge, the height of the stone is 225mm, then is slopes down to 110mm. But what I could acchive is that the right 100mm I have shown is meant to be 75mm which the back stays at 110mm. Is there a way I can achieve this?
AutoCAD Civil 3D :: Superelevation For 1-Lane Ramp (different Shoulder Widths)
Apr 3, 2013 I'm attempting to use the Superelevation tool on an interchange. I have 4, 1-lane ramps that I need to apply superelevation to. The three issues I have (so far) are:
In the Calculate Superelvation Wizard...
1. In Roadway Type, I don't know what to choose, I'm leading toward Undivided Crowned (center Baseline ) because my assembly (as of right now) is set up as an undivided crowned roadway (with the crown on the west travel lane edge). Which Roadway Type I should choose (for a 1-lane Ramp with different shoulder widths?)
2. Moving on to the the Lanes category doesn't matters. I uncheck symmetric Roadway, hoping I can choose "0" for the number of lanes on the Left, or at least put the lane width down to "0" but can't do either. I uncheck the Symmetric Roadway and it still makes everything symmetric (it acts as though it is still checked?) I only want to show a single 15' lane. (I even tried to use undivided planar, and put both lanes at 7.5'each, but then I still have shoulder issues...)
3. Move to the Shoulder Control. Why doesn't it give me the option to do different shoulder widths? On ramps it is very common (at least in Wisconsin) to have an 8ft shoulder on the right and a 4ft shoulder on the left. How can I type in 2 different shoulder widths.
Photoshop :: Add Image Ramp In A Certain Way?
Sep 14, 2012i want to add to this image a ramp effect starting from the center to the bottom, the start colour must be like the center and gradually become black at the bottom... but must looks like all natural without horrible cut or different colour etc it's possible? i suppose yes, but how?
View 11 Replies View RelatedRevit :: How To Find Out Ramp Quantity
Oct 25, 2011Is there any way out to find out ramp quantity in revit architecture?
View 2 Replies View RelatedRevit :: 2 Way Slope Of Parking Ramp
Mar 4, 2013I'm using the floor to build the parking ramp. The ramp slopes down from west to east. I used the slope arrow to achieve it.
But I just found out today that that parking ramp also slopes down from north to south at the same time because of the sloped site.
So, how can do a 2 way slope at the same time? I tried to add the 2nd sloped arrow but that option is greyed out.
Revit :: Reflecting Ceiling Plan In Plan View?
May 30, 2012I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.
View 7 Replies View RelatedRevit :: Display Arrow Path On Ramp?
Feb 6, 2009how can i display an arrow path on ramp?
View 4 Replies View RelatedRevit :: Copy Path Of Ramp Into New File
Oct 30, 2010I am totally new to Revit...basically teaching myself with this project. I need to create a ramp that goes from -1 level to ground, 12 feet up. I have created the walls for the path but I cannot, for the life, figure out a ramp. I have tried but I guess I don't understand how it works. I tried making a straight path with switch backs but I can't get that to work well either and that's not the design I want anyway. I copied the path of the ramp into a new file, which I have attached.
View 4 Replies View RelatedAfter Effects :: How To Make A Ramp Effect On Other Layers
Mar 21, 2013I'm trying to create a lower thirds that will include some motion, otherwise I might try Photoshop for this. But basically, I'm trying to create a gradient using ramp in AE so that the lower thrids I've created fades away on the sides. Similar to the image I've attached. I don't know how to make the layer that I put the ramp effect on affect the other layers.
View 3 Replies View Related3ds Max :: Gradient Ramp Doesn't Show As Viewport Background?
May 16, 2011I wanna confirm this bug. I'm almost sure it's generalized but who knows. But in most systems I've tried I couldn't get Gradient Ramp to show as viewport background when using Nitrous.
System specs vary greatly from Mac Pros to Dells and ATI and Geforces and one QuadroFX 3700. Most with recent graphic drivers.
Photoshop :: Bridge Doesn't Start / Bridge Mini Is Running (PS6)
May 23, 2012Bridge doesn't Start, Bridge mini is running (PS6)MacPro, i7, OSX 10.7.4
View 2 Replies View RelatedPhotoshop :: CS6 Bridge Works Only As Mini-Bridge Won't Work As Stand-Alone
May 15, 2012purchased the 5.5-upgrade to 6.0 Designpremium. Everything seems to work properly except the bridge, wich won't start as stand-alone - works only as Mini-bridge inside photoshop.
While trying to start the bridge from photoshop ("go to bridge") results in a bridge's crash...
In my former installations (5.0 and 5.1) everything was ok ...
Maya Modeling :: Bridge Certain Geometries - Bridge Essentially Twists Into Itself
Dec 6, 2011I am trying to use the Bridge tool. When I attempt to bridge certain geometries my bridge essentially "twists into itself"
View 4 Replies View RelatedPhotoshop :: Bridge (and Mini Bridge) Shows No Thumbnails
Jul 9, 2012After opening Bridge CS6 (and using mini Bridge), there are no thumbnails showing. I've pointed Bridge to just one folder with less than 5 photos in it and it cannot even display them. I'm running a recent Mac Pro with 16GB RAM and kick graphics card.
View 4 Replies View RelatedPhotoshop :: Opening Mini Bridge Causes Bridge Crash
Apr 28, 2013why Bridge continually crashes when I open Mini Bridge in Photoshop?
View 1 Replies View RelatedAutoCAD .NET :: Get Specified Attribute From Block Without Loop
Aug 9, 2012I know how to get/set attribute within loop at block's AttributeCollection.But I'm wonder if I can set value for specified attribute without loop. Or I always have to iterate on each attribute in block's AttributeCollection?
View 9 Replies View RelatedAutoCAD .NET :: How To Break Loop For Enter Key
Mar 9, 2012I tried the following code posted in the forum, but i need to know how to break the loop when right click/ Enter Key is pressed.
Following is the code i used:
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurEd As Editor = acDoc.Editor
[Code]....
AutoCAD .NET :: Loop While Getpoint Succeeds
Nov 25, 2009How to loop until user quits picking points (escapes) this works but don't know if there's a better way
Dim bGotPoint As Boolean
bGotPoint = True
Do While bGotPoint = True
[Code] .......
Photoshop :: Can't Open Bridge Or Mini-bridge
Mar 9, 2012When I try to open bridge or mini bridge in CS5 I get a message saying that the program can't find the JavaScript plugin.
View 10 Replies View RelatedAutoCAD .NET :: How To Iterate Through Polyline3D Vertices With For Loop
Feb 5, 2013I know I can use the following...
...Polyline3d pl3d = acEnt as Polyline3d;foreach (ObjectId id in pl3d){ PolylineVertex3d plv3d = tr.GetObject(id, OpenMode.ForRead) as PolylineVertex3d; Point3d p3d = plv3d.Position; ...}
But I need to work with "for" loop.It seems "pl3d[i]" does not work.Is there other ways to iterate through Polyline3d vertices?
AutoCAD .NET :: Unwanted Zoom In Loop Command
Feb 12, 2013I have a portion of my routine below. Basically I need the user to continue to loop through the command. They are picking Circles or blocks in the drawing and I get the insertion point, then insert a new block. However, whenever they try and use a transparent zoom or pan to move around the drawing when the promptentityresult is hit, it zooms back to the original location.
Here is a code....
<
CommandMethod("getpnt", CommandFlags.Session)> _
Sub findpnt()
Dim cnt AsInteger = 0
Dim NEWPNT AsPoint3d = GetInsPoint()
While cnt < 3
[Code] .......
AutoCAD Inventor :: API To Get Inner And Outer Loop Of Sphere
Mar 6, 2013I have a sphere body whose material is partly removed by a boolen subtraction with another sphere. When I query the EdgeLoop of sphere for Outer edge loop using function InvEdgeLoopPtr::GetIsOuterEdgeLoop(), I always get a value of VARIANT_TRUE. check for the inner and outer loop of a sphere? use the attached file for reference.
View 3 Replies View RelatedAutoCAD 2010 :: Hangs Up And Get Caught In Loop?
Aug 10, 2013I have AutoCAD 2010. When I start it up, and draw simple lines in the drawing editer and then try to save the drawing,
AutoCAD gets hug up in a loop, and stops working.
I have tryed the repair option and I have reinstalled AutoCAD serveral times, and it still has not repaired the problem.
I need AutoCAD 2010 to do work.
AutoCAD Inventor :: Close Loop Function
Oct 23, 2012Have sketched the geometry for an 18 tooth circular sawblade. However I have had difficulty applying the close loop function. As a result am not yet able to extrude the saw blade. What to do to implement close loop?
View 4 Replies View Related