i want to add to this image a ramp effect starting from the center to the bottom, the start colour must be like the center and gradually become black at the bottom... but must looks like all natural without horrible cut or different colour etc it's possible? i suppose yes, but how?
View 11 RepliesI am trying to bild a ramp in 3d but i've been trying with no success, the ramp have a non common shape. pls look at the acad file to take a loot at the shape.
I need to have the top part at 5531mm and the bottom part at 0 and there is another part which is at 5035mm you can see that in the drrong and the ramp must 100mm thick or something similar. also i need to do it as a solid becouse i need to export it on a different software which only ecrpts solids.
Is there any way out to find out ramp quantity in revit architecture?
View 2 Replies View RelatedI'm using the floor to build the parking ramp. The ramp slopes down from west to east. I used the slope arrow to achieve it.
But I just found out today that that parking ramp also slopes down from north to south at the same time because of the sloped site.
So, how can do a 2 way slope at the same time? I tried to add the 2nd sloped arrow but that option is greyed out.
How do you merge a ramp on to the main highway using corridors? Also how would you make that surface with two different alignments? I have my main road alignment and a ramp that comes on to it so the problem I'm having is making my 3d model with the road and surface combine.
View 9 Replies View Relatedhow can i display an arrow path on ramp?
View 4 Replies View RelatedI am totally new to Revit...basically teaching myself with this project. I need to create a ramp that goes from -1 level to ground, 12 feet up. I have created the walls for the path but I cannot, for the life, figure out a ramp. I have tried but I guess I don't understand how it works. I tried making a straight path with switch backs but I can't get that to work well either and that's not the design I want anyway. I copied the path of the ramp into a new file, which I have attached.
View 4 Replies View RelatedI have a problem I am using Autocad lite 2011 and need to draw if you can picture a column with a 15 mm deep fillet 42 mm wide which has a ramp and twist applied to it spiraling all the way up it. How do i go about this.
View 9 Replies View RelatedHow to make a ramp in floor plans ?
View 2 Replies View RelatedI'm trying to create a lower thirds that will include some motion, otherwise I might try Photoshop for this. But basically, I'm trying to create a gradient using ramp in AE so that the lower thrids I've created fades away on the sides. Similar to the image I've attached. I don't know how to make the layer that I put the ramp effect on affect the other layers.
View 3 Replies View RelatedI wanna confirm this bug. I'm almost sure it's generalized but who knows. But in most systems I've tried I couldn't get Gradient Ramp to show as viewport background when using Nitrous.
System specs vary greatly from Mac Pros to Dells and ATI and Geforces and one QuadroFX 3700. Most with recent graphic drivers.
Im doing a 3D design of kerb stone which includes a pedestrian ramp.
Please refer to my picture.
The kerb stone I have issues with is the one I have provided dimensions for. From the right edge, the height of the stone is 225mm, then is slopes down to 110mm. But what I could acchive is that the right 100mm I have shown is meant to be 75mm which the back stays at 110mm. Is there a way I can achieve this?
Looking for grading plan for RAMP and Loop for bridge.
View 3 Replies View Related I'm attempting to use the Superelevation tool on an interchange. I have 4, 1-lane ramps that I need to apply superelevation to. The three issues I have (so far) are:
In the Calculate Superelvation Wizard...
1. In Roadway Type, I don't know what to choose, I'm leading toward Undivided Crowned (center Baseline ) because my assembly (as of right now) is set up as an undivided crowned roadway (with the crown on the west travel lane edge). Which Roadway Type I should choose (for a 1-lane Ramp with different shoulder widths?)
2. Moving on to the the Lanes category doesn't matters. I uncheck symmetric Roadway, hoping I can choose "0" for the number of lanes on the Left, or at least put the lane width down to "0" but can't do either. I uncheck the Symmetric Roadway and it still makes everything symmetric (it acts as though it is still checked?) I only want to show a single 15' lane. (I even tried to use undivided planar, and put both lanes at 7.5'each, but then I still have shoulder issues...)
3. Move to the Shoulder Control. Why doesn't it give me the option to do different shoulder widths? On ramps it is very common (at least in Wisconsin) to have an 8ft shoulder on the right and a 4ft shoulder on the left. How can I type in 2 different shoulder widths.
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies View RelatedI have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies View RelatedI'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedI am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies View RelatedI have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies View RelatedAll the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies View RelatedHow to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies View RelatedWhen I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedI am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies View RelatedI want to copy one image and paste it into a selection (masked) of another image. I have the option to paste into which works but would like to be able to paste in Place as I believe this makes it a smart object and references the original file.
View 5 Replies View RelatedI photographed a framed painting that, despite my best efforts, came out as a trapezoid rather than the rectangle I intended. The image has a slight taper in the sides going from top to bottom. The top of the image is 100% of the canvas width while the bottom of the image is perhaps 95% of the canvas width, so it is close to a true rectangle but not exact. What that means is that the bottom of the photo needs to be stretched by about 5%, the middle needs to be strecthed by about 2.5%, and the top is OK as is. Naturally, the amount of stretch required becomes progresively greater when going from the top to the bottom of the image. I'm new to Photoshop. Is it possible to perform such an image manipulation?
View 8 Replies View RelatedI'm putting together a series of images, and I want the horizon line to be a constant from image to image, though they were not that way in the original files. I'm assuming that I should go with the picture that has the smallest distance from the bottom of the picture and then crop the others so the distance appears to be the same in them as well. But is there a way to make that a simple process?
View 1 Replies View RelatedWas really wanting to get the first image at the end of a spotlight inserted in the second image of the city off in the distance. Kind of like how the batman symbol is in the spotlight. The symbol is my churches logo and was wanting to use it for our Instagram.
Attachment 36457
Attachment 36458
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View Related