AutoCAD Inventor :: Arrow Side Position In Drawing Templates
Nov 1, 2012
I want to change the Arrow Side Position for Weld Symbols from Top to Bottom for all future drawings. I have opened the Drawing Template (Standard.idw) and opened the Styles Editor and switched the Arrow Side Position and saved the template. Then I have tested. In the template it works good, but when I open a new drawing (based on the template) the arrow side position didn't change.
View 4 Replies
ADVERTISEMENT
Aug 29, 2013
we have just upgraded from Inv 2011 to 2013. I am trying to create the drawing templates in 2013 by using the blank 2013 template and then copying our border from 2011 onto it. This works a treat apart from 1 thing.
The i properties do not get copied over as well so the sheet is blank from drawing number, title and the custom properties etc.
View 6 Replies
View Related
Nov 23, 2011
A quick question about Mulitleaders. Is it possible to force AutoCAD to attach the Arrow to the right side of the text? As it is right now if I move the arrow to far to the left, the arrow jumps over and attaches to the left side - is it possible to force it to stay on the right side no matter how far left I push it?
View 9 Replies
View Related
Jul 25, 2012
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies
View Related
Jan 28, 2013
I want to insert arrows into an idw. I usually use 'Leader Text' then leave the text blank.
The only problem with this method is it leaves a small horizontal or vertical line at the 'text' end of the arrow. Is there a way to get rid of this or is there an alternative way of inserting an arrow?
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
View 5 Replies
View Related
Apr 15, 2013
Have more than one drawing template? (we use A and B size sheets)
My questions concerns, metric vs imperial A vs B vs C etc etc drawing sheet size title block does not scale down accordingly when change sheet size within an existing drawing template.
Is it possible to have one drawing template that can be toggle imperial vs metric, and then sheet size selected and then the title block scaled down or up accordingly? (I would assume this could be done using iLogic)
Or is it normal to have different drawing templates for sizes and units?
View 9 Replies
View Related
Jul 12, 2013
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
View 4 Replies
View Related
Jan 21, 2013
How to get postion of faces of part when place on idw drawing file???
Do we need to use (ThisApplication.MeasureTools.GetMinimumDistance(oTG.CreatePoint2d(0, 0), oFa.PointOnFace)?
If we use that we will get distance but how to get face postion on idw. do we need to use edges?? or lines?
View 2 Replies
View Related
Oct 17, 2013
Is there any way to change the position in which the leader arrow attaches to the tag? I want the arrow to come from the top left and bottom right.. Is there away to set this up? As you can see, by default, it comes from the center. I was hoping there would be some adjustability on this.
View 7 Replies
View Related
Aug 23, 2012
Change side position of image to face forward?
View 8 Replies
View Related
Dec 6, 2012
I'm going to take the computer home tonight so that I can set up as many drawing templates that I will conceivable need at work.
Are there any special ways to go about this or CAD standards that I should observe?
I mostly use A3 and A4 paper for architectural metric drawings.
Is it worth making me own templates so that I can just jump into future drawings or is it better to download templates from the internet?
View 9 Replies
View Related
Dec 20, 2013
When I plot my Autocad drawing, arrows (see attached image) arrow.jpgpop up. I'm pretty sure they are coming in from one of my architecture x-ref files, but as they only pop up when the drawing is plotted, I cant seem to figure out how to turn them off.
View 2 Replies
View Related
Mar 20, 2007
I am now using AutoCAD 2007 and I am a new AutoCAD user. How can I draw a vector or a line with one or two arrow ends in AutoCAD ? It is really simple to do that in MS Word
View 9 Replies
View Related
Dec 9, 2013
I have created a drawing template in C3D with layers, blocks, descriptor keys and all the fun stuff, but this was just for the survey section of the engineering group I work with. Now the engineers, who had another template set up with design layers which they don't use but may want to use, asked me if I can add their layers to my template. The have about 2000 layers and I do not want to manually add this information. Is there any way I can either export their layers or merge the layers?
View 3 Replies
View Related
May 23, 2012
I would like to show a north arrow on my drawing, but i dont know where north is,
Does autocad know where it is, my site is in a very remote mountaineous area with nothing to reference off on goole earth or maps.
View 5 Replies
View Related
Jun 23, 2011
I have a block that has a leader under an ARCH dimstyle. It's red but when I insert it into a drawing the line and arrow are white because that's what the ARCH style is in the drawing. Isn't there a setting that stops that from happening?
View 1 Replies
View Related
Aug 20, 2013
How do you lock your properties menu to the left or right side of your drawing. And have it minimize when you scroll on and off it.
View 2 Replies
View Related
Oct 6, 2011
I am trying to create an automatic isometric drawing from the top, side and front views...
View 9 Replies
View Related
Apr 1, 2012
I am trying to draw a 3D arrow using 3ds, similar to the top left 3D arrow from this stock image website: [URL]...... and I am unsure how to approach this problem.
It must not be a hard image to draw considering how many people are selling this image online, but I am stuck. I have tried creating a box, converting it to an editable polygon, and then applying the bend modifier to the box, but it does not look anywhere as good as the image on that website.
View 5 Replies
View Related
May 4, 2012
i wish to set up a mobile reciever device that can integrate with an autocad dwg drawing to show my physical location in the real world as a point on the drawing screen in real time.
I guess you would say it would work exactly the same way a GPS map works however instead of using the GPS and street map i would be substituting in a construction site base station and autocad drawing.
p.s the "Leica" system will not do the job for me. from my search so far it mainly works with elevations rather than lateral positioning in real time. i do not want to have to constantly move emitters and or receivers on the worksite in order to track my movements in real time and display them on the cad drawing i have in front of me!
View 4 Replies
View Related
Mar 29, 2012
I am trying to build a 3d model and I am requirng to draw 2d sketches in the side view e.g right but all the happens is that the polylines do not go at the angle I need them at they jsut go parallel to the bottom. Also how do i create like a plane which I can draw a flat sketch on which i can set an offset from my first sketch?
View 1 Replies
View Related
Dec 11, 2012
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
View 1 Replies
View Related
Jun 16, 2009
I have Photostop CS3 on a pc and want to draw several arrows with a curve. I can draw a line with the pen tool and make a bezier curve, but how do I add an arrow head? Using the arrow symbol only lets me draw an arrow in a straight line and the head of the arrow is too big.
View 8 Replies
View Related
Apr 26, 2013
I want to draw a directional arrow on top of a background image.
And then render/export it as a video, and use it in an image sequence for INDD DPS (so when the image is activated in an iPad app, the arrow draws across the image on the screen).
Is there a way to create this arrow drawing using Timeline in CS6?
View 3 Replies
View Related
May 23, 2013
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
View 2 Replies
View Related
Jan 3, 2014
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies
View Related
Mar 15, 2012
I've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
View 4 Replies
View Related
Jan 3, 2014
I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies
View Related
Nov 12, 2013
I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
View 2 Replies
View Related
Nov 27, 2012
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies
View Related
Mar 9, 2013
I've opened up Inventor 2013 and clicked 'new' but no templates have come up. I went to my templates file in my documents and there wasn't any there. Where can I get the templates?
View 6 Replies
View Related