CorelDRAW X4 :: Change Side Position Of Image To Face Forward?
Aug 23, 2012Change side position of image to face forward?
View 8 Replies
ADVERTISEMENT
Photoshop :: Editing Photo Face - Left Side Is Lighter Than Right Side?
Sep 2, 2012Im having a problem editing a photo 'face' one side 'left' side is lighter than the right side because of lighting. I was wondering If I could get both sides even prefably the lighter side like the normal side.
Is this possible? Because everytime I try edit the lighter side it still remains lighter.
Revit :: Create Roof With Same Line On Top Roof Face And Vertical Side Face?
Nov 4, 2011creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Crop One Side Of 3D Image / Flatten?
Feb 24, 2012BenPruess-pyramid-egyptian-art.jpg
it's possible to crop one side of a 3D image & "FLATTEN" it with Corel Draw ?
Eg: The attached image shows a 3D Pyramid. Is it possible to crop out the side (with drawings) & "FLATTEN" it ?
So that i can simply print it out to serve as a template design.
GIMP :: How To Duplicate Image Side By Side Then Rotate One Image
Sep 23, 2013I just started to use Gimp a few days ago. I am trying to duplicate an image side by side, then rotate the one image....just for learning purposes. However the new box (that should have my duplicate image) Is just a blank outline of the rectangle box. I watched a video over and over trying to get this, and I just do not see any steps I am missing, yet on the video it turns out perfect. I am normally pretty good with computers, but evidently not with Gimp.
Here is the Path:
file> open>select and open photo>rectangle tool>outline photo>copy>paste>open new layer>select new pasted layer.
Instead of the photo duplicating itself I get a "blank outlined box".
Paint Shop Pro :: Viewing Same Image Side By Side For Editing
Feb 22, 2012I am sure that you must be able to do it...surely..but how can you see images side by side, so that the original is on the left and the edited on the right?
View 6 Replies View RelatedAutoCAD Inventor :: Arrow Side Position In Drawing Templates
Nov 1, 2012I want to change the Arrow Side Position for Weld Symbols from Top to Bottom for all future drawings. I have opened the Drawing Template (Standard.idw) and opened the Styles Editor and switched the Arrow Side Position and saved the template. Then I have tested. In the template it works good, but when I open a new drawing (based on the template) the arrow side position didn't change.
View 4 Replies View RelatedPhotoshop :: Virtual Image And Side-by-Side Views
Feb 20, 2012I use both CS5 & LR3 (and sometimes Canon's DPP as an image browser). I want to stop using LR and just have one app (CS5) to manage
I do not need the database & image management features of LR. However, I do make a lot of use of virtual images and side-by-side views (candidate selection & before/after views of virtual images with the original).
How do I efficiently do the same thing with Bridge/ACR/Photoshop?
GIMP :: Put Two Images Side By Side Then Convert Into One Image?
May 22, 2011I want to generate a single image which compares two different images side by side. Can Gimp do this?
There was a tab called "new" which enabled me to generate the white background needed to do the merging. One of those little details the author forgot to mention. They just said " Open the first image as a new layer and move it to the left" without mentioning that you had to find the "new" key and put in the white background first!
After Effects :: Importing Side By Side Image Sequences
Apr 13, 2014easy way to import 2 sets of image sequences into AE and have them side by side, so both sets will be inside 1 frame.Example of what I'm doing is having a phone conversation, instead of switching back and forth between the actors (image sequences) I want to see them both at the same time next to each other.
View 3 Replies View RelatedPhotoshop :: Joining An Image Side By Side?
Jun 21, 2006I have a picture of the ocean (the cover of one of audioslave's albums) that I want to join side by side to make it look continuious. Code:
View 9 Replies View RelatedCorelDRAW Graphics Suite X6 :: Moving Object Forward And Behind Images
Dec 17, 2013Moving Object Forward and Behind Images constant PROBLEMS . we have a built in scale spinner in corel draw giving us the
Ability to pretty much work in infinity working area, why is it that we are constrained only to page area to cycle objects forward and back of other objects, why is it that I can move my logo behind bitmap within the working area but quite often can not do the same outside the working area.
it always disrupts the workflow, sometimes it seems to work when you oversave then for some reason I can move that object behind that bitmap, sometimes there are instances where I am unable to do that unless i completely restart corel draw... is that productive ?? ,
Why is it that this had not been addressed yet, I remember this being an issue I believe since corel 11 or perhaps even farther.
CorelDRAW X5 :: Change RGB Colors In Image To Pantone?
May 18, 2012Is there any way to change the RGB colors in an image to Pantone without having to select each individual part of the design? Basically what I am hoping to do is change certain parts of an image that are let's say R:0, G:0, B:0 and change them to Pantone Black C without having to select each section one by one.
View 3 Replies View RelatedGIMP :: Cut Right Half Of One Image And Paste It In Same Position On Second Image
Jul 5, 2012I want to cut the right half of one image and paste it in exactly the same position on a second image.
I've found that by cropping I can get a very precise cut but I want to know if there is a way to paste it or move it once pasted to exactly the right half of the image I am pasting it into.
AutoCad :: How To Put Corner Image Onto The Side Of 3D Box Image
Jul 27, 2011How do you put a corner image onto the side of a 3d box image without it looking stretched and out of proportion?
View 5 Replies View RelatedXara :: Rescale Without Change Of Position
Apr 11, 2011Is it possible to rescale a lot of objects without simultaneously rescaling the distance between them? I have about 500 circles, all .3cm diameter, that I'd like to change to .4 diameter, while retaining the positions of their centres?
View 6 Replies View RelatedRevit :: Change Tab Position On The Ribbon
Nov 10, 2013I installed an application into revit 2012, now it has shoved itself up to the left most tab and is interfering with my workflow.
Can I change the tab position on the ribbon so the application tab is always far right?
Using Revit 2012
AutoCad :: Change Position Of Attributes?
Apr 9, 2012Can I change position of attributes depending on visibility states? I want to move existing attributes, not to add new and then hide it (maybe that is possible).
View 7 Replies View RelatedAutoCAD .NET :: How To Programmatically Change The Position Of The Sun
Sep 21, 2013How to programmatically change the position of the sun autocad?
View 6 Replies View RelatedPhotoshop :: Change Side-Folders In File -> Open
Aug 9, 2012I just wondered if it is possible to change the marked section (in the screenshot below) in the file-browser you get through "File > Open".
Screenshot:
Photoshop :: Animating 3D Position Change In Extended CS6
Jun 24, 2012I am trying to animate a simple 3D position change in Photoshop Extended CS6 (OS 10.7.4)Here's what I do:
1. I move my object to its starting position.
2. I move the Current Time Indicator ("playhead") to the time I want the position change to start.
3. I click the Time‑Vary stopwatch icon on the Position layer of the timeline, and a keyframe is automatically created, no problem.
4. I move the playhead away from the initial keyframe to the time I want the position change to end.
5. I move my object to its ending position.
I expect to see the second keyframe be automatically created, as advertised, BUT it is not. What's more, if i move the playhead to "scrub" through the animation, I see no movement. What's happened is the position I set for Keyframe 1 has changed to the position I just moved the object to, which I intended to be Keyframe 2.
AutoCAD Inventor :: Change A Subassembly Position
Jul 31, 2013I've tried this code here after setting the assembly flexible in the top level but it doesn't work.
ThisApplication.ActiveDocument.ComponentDefinition?.RepresentationsManager.PositionalRepresentations(?"Test").Activate
I will be pulling the subassemblies in as read-only parts and I would like to change the positional representation with code in the top level assembly.
Illustrator :: CS5 - Join Causes Points To Change Position?
Dec 5, 2013What setting have I changed: Just today, when I try to move a point, "unite" shapes, or join 2 points, the points jump out of position. I've turned off "snap to grid" and "align new objects to pixel grid". I've even copied and pasted the artwork into a new "default" file. I've also restarted AICS5. I'm sure I'm overlooking something obvious.
View 5 Replies View RelatedMudbox :: Change Topology Of Face
Jun 29, 2013I have sculpted several levels of detail on a face and have run into a issue.I have realized that I want to change the topology of the face.How do I go about doing this without losing all of the sculpted detail?
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Export Results In Change In Image Size?
Nov 26, 2012I am creating my files in 5x. The final product will be a printed 8.5 x 11 calendar. The company requires 300dpi resolution, and a bleed size of 1/16".
Product 8.5" x 11" Calendar
Final Size 8.5" x 11"
Bleed Size 1/16"
Resolution to Submit 8.627" x 11.127", 2588 x 3338 px, 300dpi
My page is letter size.The image is a bitmap composed of numerous photographs and vector graphics.
I have saved them to a CMYK BITMAP 300DPI.In Corel the image reads as 11.125" x 8.625"
When I export to a pdf or jpg the image size changes to 11.293" x 8.796" which will not work for the printer. It sets the design elements outside the 'safe zone'.
CorelDRAW Graphics Suite X4 :: Print Image - Color Change On Paper
May 23, 2013corelx4.jpg
When print an image, the color change. All the colors are different in the paper.
My printer is Canon ip4200.
CorelDRAW X4 :: Change Colour Black And White Bitmap Image To Sepia
Jun 9, 2011How do I change colour and black & white bitmap image to sepia?
View 2 Replies View RelatedCorelDRAW X5 :: H And V Position Changing
Aug 9, 2011CorelDrawX5-PositionBug.gi...
I am running CorelDraw version 15.2.0.686 with Service Pack 1.
I need to position graphics in exact locations and using the Transformation Position window, especially with Nudge and Super Nudge, is very useful. However, when I zoom in or out, go to another page of the document and back again, or close and re-open the file, many times the H and/or V coordinates shown in the Position window will have changed by one or two units (sometimes more). I can change them back to the correct coordinates but they will change again, and not necessarily by the same amount, when doing any of the actions I mentioned.
It's not that big of an issue when I know the location ends in either a 0 or a 5 and I can move it back to the correct location, but there are times when the graphics are not on a round number and I don't know if it correct or not.
This has been a bug in many versions of Corel (I have been a CorelDraw user since the beginning), but it is happening with every file I work on in X5.
CorelDRAW X6 :: Outline Pen Position
Oct 24, 2013I find corners and line caps in outline properties in CorelDraw x6.
But where is POSITION, like in previous versions?
I want to create outline inside object.
Behind fill is not what I want.
Photoshop :: CS6 - Change Position Of Character On New Frame In Animation
Mar 25, 2013This is an annoying issue within photoshop. I am working on an animation for a video and when I try to change the position of a charater on a new frame it also changes the positioning on all of the frames previous of it.
I am making a walk cylcle and I want the character to walk from one end of the screen to the nextl but, when I make a new frame, move him to the opposite end of the screen on a NEW FRAME it changes the previous frames position to match the current one I am on.
AutoCAD Inventor :: Possible To Change One Of Positions To Be Master Position
Feb 15, 2007I have made an assembly with a lot of "Positions" (in the Representations). See browser.
Is it possible to change/edit one of the Positions (In the Representation tree) to be the Master Position?