I have made an assembly with a lot of "Positions" (in the Representations). See browser.
Is it possible to change/edit one of the Positions (In the Representation tree) to be the Master Position?
I've tried this code here after setting the assembly flexible in the top level but it doesn't work.
ThisApplication.ActiveDocument.ComponentDefinition?.RepresentationsManager.PositionalRepresentations(?"Test").Activate
I will be pulling the subassemblies in as read-only parts and I would like to change the positional representation with code in the top level assembly.
is there any way that I can change position of represenations with shortcut on keyboard? I use mouse to select each position now.
inventor 2013 sp2 64bit with window 7
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
We have one ilogic rule with different types of User controled boxes. 1x InputListBox 2x InputBoxes Both InputBoxes appears in the center of the screen. The InputListBox appears in the upper left croner of the screen. That's not optimal for the user This problem only occurs when I call the rule via .net program in the User Interface. The Problem does not occur when I load the rule via runRule in the iLogic Rule Browser.
View 2 Replies View RelatedI have a plan view where I want to show the door openings but I want the section view w/ the doors closed. I can't seem to get inventor to do this.
View 1 Replies View RelatedI cannot change the leader text position to be aligned next to the leader line, the text is positioned offset from the line, how do I correct this .
See attached image.
why members change position once mirror has been done in Assembly mode.
1..... i complete a sketch and save it.
2....Then i open up a new assebly while in the same project and save that also.
3...I place the sketch in the assembly and then go straight to Design tab and select insert frame a PFC member.
4 Also the sketch is fully constrained before going into assembly.
5..Now all mitering has been done.
6 Problem is when you Mirror the PFC in the assembly after picking a face or plane they change....................?
7 They mirror but swap ends and the miters are opp hand.
I'm working on constructions that are operated with winches. However, I haven't found a way to model the wire so that it moves as it should.
I've attached a simplifed assembly that illustrates my issue.
In the "Master" position the wire looks as it should.
However, in the "Up" position, the wire does not. (red line indicates desired wire path)
I'm not interested in making the wire slack, just to have straight lines and radiuses around the sheave.
The actual constructions are much more complex, with 15+ sheaves and the wire moving in all three dimensions, not just in one plane as in the attached example. So a simple extrude cut on the assembly would not work.
I need the wire to work in the various set positions ("Master", "Up" & "Halfawy up") on an assebly level, so that it can be shown on drawings.
Optimally I'd love it to work in the "Flexible" position, so that it automatically adjusts (in real-time) as I move the rod, but it's not a requirement.
I've found multiple videos on Youtube showing something similar to what I want to accomplish, but no description of how it's done. Examples:
Inventor Simulation - Pulley and Cable.wmv
Winch - Autodesk Inventor (the wire being spooled onto the winch is not required, but it does look nice)
In an idw views of an assembly with positions aren't represented correctly.
In the iam in is necessarry to update for an correct representation of the position.
But when a update of the view in the idw is forced, the view isn't correct!
I ticked association of the view in the idw.
I also installed the latest hotfix for Inventor 2012.
I need to Import a IAM file with Views and Positions to Showcase. I found several tutorials on this, but as soon as I add a position in Inventor none of the above are imported. Without any Positions, Views get Imported.
It's Inventor and Showcase 2013.
Can I change position of attributes depending on visibility states? I want to move existing attributes, not to add new and then hide it (maybe that is possible).
View 7 Replies View RelatedHow to programmatically change the position of the sun autocad?
View 6 Replies View RelatedIs it possible to have an idw file of a part as the master idw and insert that idw into a new idw or a few different idw files and the secondary idw files that were inserted update when the master idw file is edted or updated?
I am using the same ipt in multiple assemblies and i would only like to update one idw file. I do need to have as many as eight different idw files related to the single part and i would like to only update the master idw file.
I have generated a batch of several thousand drawings, and then realized that my 'Page 3' paper space is positioned over page 2 in the model! Is there a way that I can tell 'Page 3' to change position to co-ordinates of my choosing, using only script, so that I can write a batch program to change them all?
My only other option is to correct the error in the master drawing and generate all the thousands of drawings again, which is why I'm keen to explore alternatives!
I was making some changes the other day to the parts list settings inside of the styles editor and discovered that this involved needing to make the master project file a read/write condition. I was starting to get into uncharted territory at this point, but was proceeding with caution. So I went into my vault working folder in windows explorer and RC'd on the MPF and changed it to read/write. I made my BOM changes and life seemed to be good on the heals of a long holiday weekend. I changed the properties of the MPF back to read only and I thought things were fine.
Until yesterday when I started getting this message. This shows up every time I open and check out a file from Vault. Plus it also changes my MPF on my local drive back to read/write. I am also starting to get this error message when I start a new drawing file as well.
I have an assy in which I have created work planes which are huge and annoying, so I make them invisible but when I save the assy I get a message saying the Design Current Design view representation.... blah blah..... or Unlock the Current one.
How do I unlock the Master View Rep.
the activation is failed because the serial number i've enterred is not valid. i install AutiCAD LT on tha same computer with new Operating System(Win7)
View 1 Replies View RelatedHow can I block the View representations on Master, so that when I reopen the asembly it is on Master, or, the view I want ?
View 2 Replies View RelatedWe are having an issue where the master project file that we have created at my company keeps switching back to the default.ipj file randomly. This is causing obviously our template paths as well as other path settings to not be right.
Our VAR told us that this randomly happens. why this is happening or that my VAR is correct in what they said?
I have a macro to change the thumbnails of a part, but my parts have not always the "Master view" active.
How can I activate a view by code? Get control of your sheet metal files at [URL]
I have a little over 100 materials created that I need to add to my design data materials master and to avoid having to go into styles managaer and hand type them all over again is there a way to add materials through something like excel or edit the materials list through excel?
IV 2010 SP3
I have a top level assembly which has more than 5000 components.
It was saved previously in a particular LOD.
Now i want the same assembly to be uploaded to the vault in turn which i should be reactivating the master LOD.
The moment I click activate the master LOD, inventor freezes and stalls for couple of hours.
my machione has a very decent configuration with 32GB ram memory.
Is there a way to create sub assemblies from components already in an assembly?
See attached link from Solidworks doing this. Looking for something similar. [URL] ........
Whenever I do a model update through an ilogic form my View representation changes from default to master and then i have to go and manually change them back to default also in my idw files in order to update the drawing files I have to go in and change the view representation from default to master click ok and close it then open view edit set it to default and close. Is this normal? Is there a setting so that my model views will stay on default?
View 2 Replies View Relatedis there a way I can "Unlock" my MASTER view in representations. I keep having to create new views as the MASTER is locked and for some reason I can't unlock it.
View 4 Replies View Relatedjust upgraded from 2004 to 2012. Wow, sure looks different.I'm playing around with the ribbon & don't know how to stop an annoying behavior. I position the ribbon locked to the side of my display because I have a wide screen & if docked to the top I end up with a very wide, skinny drawing area. when ever I make a change tp the ribbon contents it goes back to the default top position, after which I have to relocate it again. Is there a way to get it to remember the previous position of the ribbon?
View 3 Replies View RelatedAm using the "pre-defined" walls in Autocad Architecture 2010, with equally pre-defined windows.
I have found where to change ("Edit window style") virtually every parameter of the window, e.g. frame and sash depths.
However - I can not find a way to change the position of the the glass in the window relative to the interior/exterior of the wall. (see attached image for clarification)
I hope I am making myself understood - the glass could for example (assuming the depth of the frame is the same as that of the wall it sits in) be located 40mm from the exterior of the wall - or 10mm.
Trying to change the position of the "elevation" labels on the horizontal axis. They come default as being inside the profile and i want them shown on the outside of the profile box.
View 3 Replies View RelatedI thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
Just wondering, if I have several seperate idw files and I want to combine them into one master file, is this possible? Would be handy to have all my drawing on one file instead of the 30 or so seperate ones it will become.
Inventor 2014 PDS
I have an issue with opening assembly files as they always open as Master not Last Active.
Have I missed an option on another tab or something else?
64-Bit Inventor Professional 2012
Build 219, SP2
