AutoCad :: Change Position Of Page 3 To Coordinates Of Choosing
Jul 28, 2011
I have generated a batch of several thousand drawings, and then realized that my 'Page 3' paper space is positioned over page 2 in the model! Is there a way that I can tell 'Page 3' to change position to co-ordinates of my choosing, using only script, so that I can write a batch program to change them all?
My only other option is to correct the error in the master drawing and generate all the thousands of drawings again, which is why I'm keen to explore alternatives!
View 9 Replies
ADVERTISEMENT
Oct 14, 2013
I'm looking to make the jump from Photoshop. Is there a way to position elements/objects/text by coordinates? This is my single biggest gripe with PDN.
View 3 Replies
View Related
Aug 25, 2012
Is there any way to enter exact position coordinates ( x, y) and dimensions for objects in P'shop? For example, putting a photo in an exact position and sizing it by other than dragging handles with the mouse?
View 3 Replies
View Related
May 6, 2013
I am guessing this will be a no but is there a way to change page setup for more than 1 page at a time? I have multiple pages in a drawing that I want to change to all the same page setup.
View 3 Replies
View Related
Mar 28, 2012
I’m trying to create a view port, which covers my entire layout (white/ page area) using the following command
(command “mview” ‘(0 0 0) ‘(297.5 210 0))
However as you will note 0,0,0 is not the very edge corner of my layout (white area) and my white area is smaller then 297.5x 210mm (standard A4 landscape size)
How to obtain the exact measurements and starting coordinates to fully fill my entire layout page (white area)?
View 1 Replies
View Related
Aug 15, 2011
I am trying to center objects in the page but for some reason the Object Position is not working. I am doing a 24x36 poster and when I type 12 in to center the object it is not working.
View 2 Replies
View Related
Oct 16, 2010
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
View 3 Replies
View Related
Apr 9, 2012
Can I change position of attributes depending on visibility states? I want to move existing attributes, not to add new and then hide it (maybe that is possible).
View 7 Replies
View Related
Sep 21, 2013
How to programmatically change the position of the sun autocad?
View 6 Replies
View Related
Nov 19, 2011
How to change coordinates of polyline ?
I know how to get the coordinates but I need to get and change one of the coordinate.
View 1 Replies
View Related
Apr 30, 2013
How to change the koordinates in a 3D dwg to 2D?
View 9 Replies
View Related
Jan 28, 2012
how to change coordinates of an objects in autocad 2009? for example i have a drawing and i don't want to move the drawing, instead i select single object and make zero positions (X,Y,Z) for this object default.
View 4 Replies
View Related
Dec 13, 2011
I recieved a drawing in which the coordinate values are a thousand times too high; they are in millimeters and I need them in meters. I checked the settings of the drawing, and it clearly says that it´s in millimeters, but it doesn't change the setting or to copy the whole drawing into a new file with meter settings.
How I can change the coordinates to meters?
View 4 Replies
View Related
Jul 31, 2013
I've tried this code here after setting the assembly flexible in the top level but it doesn't work.
ThisApplication.ActiveDocument.ComponentDefinition?.RepresentationsManager.PositionalRepresentations(?"Test").Activate
I will be pulling the subassemblies in as read-only parts and I would like to change the positional representation with code in the top level assembly.
View 5 Replies
View Related
May 13, 2008
How can I change the coordinates directions? You know X to -X or Y to -Y.
View 4 Replies
View Related
Oct 22, 2013
My drawing settings is set for US Feet. My Data Collector is set for US Feet. I only import a txt file into the drawing. My txt file coordinates match my Data Collector but never in the drawing. We're only talking about hundredth but I don't understand why it changes in the first place.
Example
Point 1 in txt file & DC --- 10000N 5000E
but in drawing --- 9999.98N 4999.99E
Point 2 in txt file & DC ---- 9624.7230N, 4971.5346E
in drawing ----- 9624.7422N, 4971.5445E
View 9 Replies
View Related
Feb 15, 2007
I have made an assembly with a lot of "Positions" (in the Representations). See browser.
Is it possible to change/edit one of the Positions (In the Representation tree) to be the Master Position?
View 4 Replies
View Related
Jul 1, 2013
is there any way that I can change position of represenations with shortcut on keyboard? I use mouse to select each position now.
inventor 2013 sp2 64bit with window 7
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
View 3 Replies
View Related
Aug 8, 2012
We have one ilogic rule with different types of User controled boxes. 1x InputListBox 2x InputBoxes Both InputBoxes appears in the center of the screen. The InputListBox appears in the upper left croner of the screen. That's not optimal for the user This problem only occurs when I call the rule via .net program in the User Interface. The Problem does not occur when I load the rule via runRule in the iLogic Rule Browser.
View 2 Replies
View Related
Jan 31, 2013
I have a plan view where I want to show the door openings but I want the section view w/ the doors closed. I can't seem to get inventor to do this.
View 1 Replies
View Related
May 14, 2013
I have a lot surfaces. Now i need change coordinates.
[URL]
View 4 Replies
View Related
Jan 10, 2013
I cannot change the leader text position to be aligned next to the leader line, the text is positioned offset from the line, how do I correct this .
See attached image.
View 3 Replies
View Related
Dec 23, 2011
why members change position once mirror has been done in Assembly mode.
1..... i complete a sketch and save it.
2....Then i open up a new assebly while in the same project and save that also.
3...I place the sketch in the assembly and then go straight to Design tab and select insert frame a PFC member.
4 Also the sketch is fully constrained before going into assembly.
5..Now all mitering has been done.
6 Problem is when you Mirror the PFC in the assembly after picking a face or plane they change....................?
7 They mirror but swap ends and the miters are opp hand.
View 2 Replies
View Related
Mar 12, 2012
just upgraded from 2004 to 2012. Wow, sure looks different.I'm playing around with the ribbon & don't know how to stop an annoying behavior. I position the ribbon locked to the side of my display because I have a wide screen & if docked to the top I end up with a very wide, skinny drawing area. when ever I make a change tp the ribbon contents it goes back to the default top position, after which I have to relocate it again. Is there a way to get it to remember the previous position of the ribbon?
View 3 Replies
View Related
Apr 7, 2011
Am using the "pre-defined" walls in Autocad Architecture 2010, with equally pre-defined windows.
I have found where to change ("Edit window style") virtually every parameter of the window, e.g. frame and sash depths.
However - I can not find a way to change the position of the the glass in the window relative to the interior/exterior of the wall. (see attached image for clarification)
I hope I am making myself understood - the glass could for example (assuming the depth of the frame is the same as that of the wall it sits in) be located 40mm from the exterior of the wall - or 10mm.
View 2 Replies
View Related
May 21, 2012
Trying to change the position of the "elevation" labels on the horizontal axis. They come default as being inside the profile and i want them shown on the outside of the profile box.
View 3 Replies
View Related
Sep 27, 2012
I often create points manually. You get that dialogue box where you choose the layer and the default local coordinates, etc etc.
The local coordinates setting always defaults to Northing/Easting. (ditto the grid coordinates).
I set it to Easting/Northing as is standard around these parts and do my points, but if I close the box, when I reopen it to add more points later, it is back to Northing/Easting.
I cannot find a variable to control this behaviour.
I never need points to have north first and would like it to default to Easting/Northing at all times. Yes I'm using the Metric template.
Is there a way to change this default?
View 8 Replies
View Related
Jun 18, 2012
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
View 1 Replies
View Related
Jul 12, 2013
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
View 4 Replies
View Related
Aug 21, 2013
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies
View Related
Apr 11, 2011
Is it possible to rescale a lot of objects without simultaneously rescaling the distance between them? I have about 500 circles, all .3cm diameter, that I'd like to change to .4 diameter, while retaining the positions of their centres?
View 6 Replies
View Related
